WebFilings | EDGAR view
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
Form 10-K
(Mark One)
[x] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended October 2, 2010
or
[ ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from to .
Commission File Number 0-21272
Sanmina-SCI Corporation
(Exact name of registrant as specified in its charter)
| | |
Delaware | | 77-0228183 |
(State or other jurisdiction of incorporation or organization) | | (I.R.S. Employer Identification Number) |
| | |
2700 N. First St., San Jose, CA | | 95134 |
(Address of principal executive offices) | | (Zip Code) |
Registrant's telephone number, including area code:
(408) 964-3500
Securities registered pursuant to Section 12(b) of the Act:
Common Stock, $0.01 Par Value
Securities registered pursuant to Section 12(g) of the Act:
None
(Title of Class)
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes [ x ] No [ ]
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Securities Act. Yes [ ] No [ x ]
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes [ x ] No [ ]
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes [ ] No [ ]
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [ x ]
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
| | |
Large accelerated filer [ x ] | | Accelerated filer [ ] |
Non-accelerated filer [ ] | | Smaller reporting company [ ] |
(Do not check if a smaller reporting company) | | |
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes [ ] No [ x ]
The aggregate market value of the voting and non-voting common stock held by non-affiliates of the registrant was approximately $962,426,240 as of April 3, 2010, based upon the last reported sale price of the common stock on the Nasdaq Global Select Market on April 2, 2010.
As of November 15, 2010, the number of shares outstanding of the registrant's common stock was 79,811,960.
DOCUMENTS INCORPORATED BY REFERENCE
Certain information is incorporated into Part III of this report by reference to the Proxy Statement for the registrant's annual meeting of stockholders to be held on January 20, 2011 to be filed with the Securities and Exchange Commission pursuant to Regulation 14A not later than 120 days after the end of the fiscal year covered by this Form 10-K.
SANMINA-SCI CORPORATION
INDEX
| | |
PART I |
Item 1. | Business | |
Item 1A. | Risk Factors Affecting Operating Results | |
Item 1B. | Unresolved Staff Comments | |
Item 2. | Properties | |
Item 3. | Legal Proceedings | |
Item 4. | (Removed and Reserved) | |
PART II |
Item 5. | Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities | |
Item 6. | Selected Financial Data | |
Item 7. | Management's Discussion and Analysis of Financial Condition and Results of Operations | |
Item 7A. | Quantitative and Qualitative Disclosures About Market Risk | |
Item 8. | Financial Statements and Supplementary Data | |
Item 9. | Changes In and Disagreements With Accountants on Accounting and Financial Disclosure | |
Item 9A. | Controls and Procedures | |
Item 9B. | Other Information | |
PART III |
Item 10. | Directors and Executive Officers of the Registrant | |
Item 11. | Executive Compensation | |
Item 12. | Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters | |
Item 13. | Certain Relationships and Related Transactions | |
Item 14. | Principal Accountant Fees and Services | |
PART IV |
Item 15. | Exhibits and Financial Statement Schedules | |
Signatures | |
PART I
Item 1. Business
Overview
We are an independent global provider of customized, integrated electronics manufacturing services, or EMS. We provide these comprehensive services primarily to original equipment manufacturers, or OEMs, in the communications, enterprise computing and storage, multimedia, industrial and semiconductor capital equipment, defense and aerospace, medical, CleanTech and automotive industries. The combination of our advanced technologies, extensive manufacturing expertise and economies of scale enables us to meet the specialized needs of our customers in these markets in a cost-effective manner. We were originally incorporated in Delaware in May 1989.
Our end-to-end services in combination with our global expertise in supply chain management enables us to manage our customers' products throughout their life cycles. These services include:
| |
• | product design and engineering, including initial development, detailed design, prototyping, validation, preproduction services and manufacturing design release; |
| |
• | manufacturing of components, subassemblies and complete systems; |
| |
• | final system assembly and test; |
| |
• | direct order fulfillment and logistics services; and |
| |
• | after-market product service and support. |
Our manufacturing services are vertically integrated, allowing us to manufacture key system components and subassemblies for our customers. By manufacturing key system components and subassemblies ourselves, we enhance continuity of supply and reduce costs for our customers. In addition, we are able to have greater control over the production of our customers' products. System components and subassemblies that we manufacture include high-end printed circuit boards, printed circuit board assemblies, backplanes and backplane assemblies, enclosures, cable assemblies, precision machining, optical components and modules, and memory modules.
We manufacture products in 18 countries on four continents. We seek to locate our facilities near our customers and our customers' end markets in major centers for the electronics industry or in lower cost locations. Many of our plants located near our customers and their end markets are focused primarily on final system assembly and test, while our plants located in lower cost areas engage primarily in high volume, less complex component and subsystem manufacturing and assembly.
We have become one of the largest global EMS providers by capitalizing on our competitive strengths including our:
| |
• | product design and engineering resources; |
| |
• | vertically integrated manufacturing services; |
| |
• | customer-focused organization; |
| |
• | expertise in serving diverse end markets; and |
| |
• | experienced management team. |
Industry Overview
EMS companies are the principal beneficiaries of the increased use of outsourced manufacturing services by the electronics and other industries. Outsourced manufacturing refers to an OEM's use of EMS companies, rather than internal manufacturing capabilities, to manufacture their products. Historically, EMS companies generally manufactured only components or partial assemblies. As the EMS industry has evolved, OEMs have increased their reliance on EMS companies for additional, more complex manufacturing services including design services. Some EMS companies now often manufacture and test complete systems and manage the entire supply chains of their customers. Industry leading EMS companies offer end-to-end services including product design and engineering, manufacturing, final system assembly and test, direct order fulfillment, after-market product service and support, and global supply chain management.
We believe increased outsourced manufacturing by OEMs will continue because it allows OEMs to:
Reduce Operating Costs and Capital Investment. In the current economic environment, OEMs are under significant pressure to reduce manufacturing costs and capital expenditures. EMS companies can provide OEMs with flexible, cost-efficient manufacturing services through their manufacturing expertise and more significant economies of scale. In addition, as OEM products have become more technologically advanced, the manufacturing and system test processes have become increasingly automated and complex, requiring significant capital investments. EMS companies enable OEMs to access technologically advanced manufacturing and test equipment and facilities without additional capital expenditures.
Focus on Core Competencies. The electronics industry is highly competitive and subject to rapid technological change. As a result, OEMs increasingly are focusing their resources on activities and technologies in which they expect to add the greatest value. By offering comprehensive manufacturing services and supply chain management, EMS companies enable OEMs to focus on their core competencies including next generation product design and development as well as marketing and sales.
Access Leading Design and Engineering Capabilities. The design and engineering of electronic products has become more complex and sophisticated and in an effort to become more competitive, OEMs are increasingly relying on EMS companies to provide product design and engineering support services. EMS companies' design and engineering services can provide OEMs with improvements in the performance, cost and time required to bring products to market. EMS companies are providing more sophisticated design and engineering services to OEMs, including the design and engineering of complete products following an OEM's development of a product concept.
Improve Supply Chain Management and Purchasing Power. OEMs face challenges in planning, procuring and managing their inventories efficiently due to fluctuations in customer demand, product design changes, short product life cycles and component price fluctuations. EMS companies employ sophisticated production management systems to manage their procurement and manufacturing processes in an efficient and cost-effective manner so that, where possible, components arrive on a just-in-time, as-and-when needed basis. EMS companies are significant purchasers of electronic components and other raw materials and can capitalize on the economies of scale associated with their relationships with suppliers to negotiate price discounts, obtain components and other raw materials that are in short supply and return excess components. EMS companies' expertise in supply chain management and their relationships with suppliers across the supply chain enable them to help OEMs reduce their cost of goods sold and inventory exposure.
Access Global Manufacturing Services. OEMs seek to reduce their manufacturing costs by having EMS companies manufacture their products in the lowest cost locations that are appropriate for their products and end customers. OEMs also are increasingly requiring particular products to be manufactured simultaneously in multiple locations, often near end users, to bring products to market more quickly, reduce shipping and logistics costs and to meet local product content requirements. Global EMS companies are able to satisfy these requirements by capitalizing on their geographically dispersed manufacturing facilities, including those in lower cost regions.
Accelerate Time to Market. OEMs face increasingly short product life cycles due to increased competition and rapid technological changes. As a result, OEMs need to reduce the time required to bring their products to market. OEMs often can bring a product to market faster by using an EMS company's expertise in new product introduction including manufacturing design, engineering support and prototype production. OEMs often can more quickly achieve volume production of their products by capitalizing on an EMS company's manufacturing expertise, global presence and infrastructure.
Competitive Overview
We offer our OEM customers end-to-end services that span the entire product life cycle:
Competitive Strengths
We believe our competitive strengths differentiate us from our competitors and enable us to better serve the needs of OEMs. Our competitive strengths include:
End-to-End Services. We provide services throughout the world to support our customers' products during their entire life cycle, from product design and engineering, through manufacturing, to direct order fulfillment and after-market product service and support. We believe that our end-to-end services are more comprehensive than the services offered by our competitors because of our focus on adding value before and after the actual manufacturing of our customers' products. Our end-to-end services enable us to provide our customers with a single source of supply for their EMS needs, reduce the time required to bring products to market, lower product costs and allow our customers to focus on those activities in which they expect to add the highest value. We believe that our end-to-end services allow us to develop closer relationships with our customers and more effectively compete for their future business.
Product Design and Engineering Resources. We provide product design and engineering services for new product designs, cost reductions and design for manufacturability (DFx). Our engineers work with our customers during the complete product life cycle. Our design centers provide hardware, software, ECAD, verification, regulatory, and testing services. We design high speed digital, analog, radio frequency, wired, wireless, optical and electro-mechanical products.
Our engineering engagement models include Joint Design Manufacturing (JDM), Contract Design Manufacturing and consulting engineering for DFx, Value Engineering (cost reduction re-design), and design for environmental compliance with the European Union's Restrictions of Hazardous Substances, or RoHS, and Waste Electrical and Electronic Equipment or WEEE. We focus on industry segments that include Communications, Enterprise Computing and Storage, Medical, Multimedia, Defense & Aerospace, Industrial & Semiconductor Capital Equipment, CleanTech and Automotive. System solutions for these industry segments are supported through our vertically integrated component technologies, namely, printed circuit boards, backplanes, enclosures, cable assemblies, precision machining, memory modules and optical modules.
In the JDM model, our customers bring market knowledge and product requirements. We offer complete design engineering and new product introductions or NPI services. For JDM products, typically the intellectual property is jointly owned by us and the customer and we realize manufacturing revenue associated with building and shipping the product.
Vertically Integrated Manufacturing Services. We provide a range of vertically integrated manufacturing services. Key system components that we manufacture include complete printed circuit boards and printed circuit board assemblies, backplanes and backplane assemblies, enclosures, cable assemblies, precision machine components, optical modules and memory modules. By manufacturing these system components and subassemblies ourselves, we enhance continuity of supply and reduce costs for our customers. In addition, we are able to have greater control over the production of our customers' products and retain incremental profit opportunities for us. Examples of products that we manufacture using our full range of services include wireless base stations, network switches, routers and gateways, optical switches, enterprise-class servers and storage appliances, set-top boxes, MRI and computer tomography (CT) scanners, and equipment used in the semiconductor chip manufacturing process, including equipment for photolithography, chemical mechanical polishing, physical vapor deposition, automated handling tools and robotics for wafer transfer.
Advanced Technologies. We provide services utilizing advanced technologies which we believe allows us to differentiate ourselves from our competitors. These advanced technologies include the fabrication of complex printed circuit boards and backplanes having over 60 layers and process capabilities for a range of low signal loss, high performance materials, buried capacitors and resistors and high density interconnects using micro via holes that are formed using laser drills. We have added capabilities to manufacture high density flex and rigid-flex PCBs with up to 30 layers and 8 transition layers in support of Defense and Aerospace markets along with high end medical electronics.
Our printed circuit board assembly technologies include micro ball grid arrays, fine pitch discretes and small form factor radio frequency and optical components, as well as advanced packaging technologies used in high pin count application specific integrated circuits and network processors. We use innovative design solutions and advanced metal forming techniques to develop and fabricate high-performance indoor and outdoor chassis, enclosures and frames. Our assembly services use advanced technologies including precision optical alignment, multi-axis precision stages and machine vision technologies. We use sophisticated procurement and production management tools to effectively manage inventories for our customers and ourselves. We have also developed build-to-order, or BTO and configure-to-order, or CTO systems that enable us to manufacture and ship finished systems within 48 to 72 hours after receipt of an order. We have established a centralized EMS technology council to coordinate the development and introduction of new technologies to meet our customers' needs in various locations and to increase collaboration among our facilities.
Global Capabilities. Most of our customers compete and sell their products on a global basis. As such, they require global solutions that include regional manufacturing for selected end markets, especially when time to market, local manufacturing or content and low cost solutions are critical objectives. Our global network of facilities in 18 countries provides our customers a combination of sites to maximize both the benefits of regional and low cost manufacturing. To manage and coordinate our global operations, we employ an enterprise-wide software system at substantially all of our manufacturing locations that operates on a single IT platform and provides us with company-wide information regarding component inventories and orders. This system enables us to standardize planning and purchasing at the plant level and to optimize inventory management and utilization. Our systems also enable our customers to receive key information regarding the status of their individual programs.
Customer-Focused Organization. We believe customer relationships are critical to our success and our organization is focused on providing our customers with a high level of customer service. Our key customer accounts are managed by dedicated account teams including a global business manager directly responsible for account management. Global business managers coordinate activities across divisions to effectively satisfy our customers' requirements and have direct access to our senior management to quickly address customer concerns. Local customer account teams further support the global teams and are linked by a comprehensive communications and information management infrastructure.
Expertise in Serving Diverse End Markets. We have experience in serving our customers in the communications, enterprise computing and storage, multimedia, industrial and semiconductor capital equipment, defense and aerospace, medical, CleanTech and automotive markets. Our diversification across end markets reduces our dependence upon any one customer or segment. In order to cater to the specialized needs of customers in particular market segments, we have dedicated personnel, and in some cases facilities, with industry-specific capabilities and expertise. We also maintain compliance with industry standards and regulatory requirements applicable to certain markets including, among others, the medical and defense and aerospace sectors.
Experienced Management Team. We believe that one of our principal assets is our experienced management team. Our Chief Executive Officer, Jure Sola, co-founded Sanmina in 1980. Hari Pillai, President and Chief Operating Officer, joined us in 1994 and has served in various senior manufacturing management positions since that time. We believe that the significant experience of our management team enables us to capitalize on opportunities in the current business environment.
Our Business Strategy
Our objective is to maintain and enhance our leadership position in the EMS industry. Key elements of our strategy include:
Capitalizing on Our Comprehensive Services. We intend to capitalize on our end-to-end services which we believe will allow us to both sell additional services to our existing customers and attract new customers. Our end-to-end services include product design and engineering, manufacturing, final system assembly and test, direct order fulfillment, after-market product service and support and supply chain management. Our vertically integrated manufacturing services enable us to manufacture additional system components and subassemblies for our customers. When we provide a customer with a number of services, such as component manufacturing or higher value-added services, we are often able to improve our margins and profitability. Consequently, our goal is to increase the number of manufacturing programs for which we provide multiple services. To achieve this goal, our sales and marketing organization seeks to cross-sell our services to customers.
Extending Our Technology Capabilities. We rely on advanced processes and technologies to provide our vertically integrated manufacturing services. We continually strive to improve our manufacturing processes and have adopted a number of quality improvement and measurement techniques to monitor our performance. We work with our customers to anticipate their future manufacturing requirements and align our technology investment activities to meet their needs. We use our design expertise to develop product technology platforms that we can customize by incorporating other components and subassemblies to meet the needs of particular OEMs. These technologies enhance our ability to manufacture complex, high-value added products, allowing us to continue to win business from existing and new customers.
Joint Design Manufacturing Solutions. As a result of customer feedback, and our customers' desire to manage research and development expenses, we have expanded our product design services to develop systems and components jointly with our customers. In a JDM model, our customers bring market knowledge and product requirements. We offer complete design engineering and NPI services. Our offerings in design engineering include product architecture, development, integration, regulatory and qualification services; while NPI services include quick-turn prototyping, supply chain readiness, functional test development and release to volume production. For JDM products, typically the intellectual property is jointly owned by us and the customer and we realize manufacturing revenue associated with building and shipping the product.
Continuing to Penetrate Diverse End Markets. We focus our marketing and sales efforts on major end markets within the electronics industry. We have targeted markets that we believe offer significant growth opportunities and for which OEMs sell complex products that are subject to rapid technological change because the manufacturing of these products requires higher value-added services. Our approach to our target markets is two-fold: we intend to strengthen our significant presence in the communications and enterprise computing markets, and also focus on under-penetrated target markets, including the medical, industrial and semiconductor capital equipment, CleanTech, automotive, and defense and aerospace industries, many of which have not extensively relied upon EMS companies in the past. We intend to continue our diversification across market segments and customers to reduce our dependence on any particular market.
Pursuing Strategic Transactions. We seek to undertake strategic transactions that give us the opportunity to access new customers, manufacturing and service capabilities, technologies and geographic markets. In addition, we plan to continue to pursue OEM divestiture transactions that will augment existing strategic customer relationships with favorable supply agreement terms or build new relationships with customers in attractive end markets. Potential future transactions may include a variety of different business arrangements, including acquisitions, spin-offs, strategic partnerships, restructurings and divestitures. We intend to continue to evaluate and pursue strategic opportunities on a highly selective basis.
Continuing to Seek Cost Savings and Efficiency Improvements. We seek to optimize our facilities to provide cost-efficient services for our customers. We maintain extensive operations in lower cost locations, including Latin America, Eastern Europe, China, Southeast Asia and India, and we plan to expand our presence in these lower cost locations as appropriate, to meet the needs of our customers. We believe that we are well positioned to take advantage of future opportunities on a global basis as a result of our vertically integrated manufacturing strategy.
Our Products and Services
We offer our OEM customers end-to-end services that span the entire product life cycle. Examples of products that we manufacture for OEMs include wireless and wireline communications equipment, high-end computer servers and storage devices, avionics, medical imaging and diagnostic systems and digital satellite set-top boxes. These products may require us to use some or all of our end-to-end services.
Product Design and Engineering. Our design and engineering groups provide customers with design and engineering services from initial product design and detailed product development through to production. These groups also complement our vertically integrated manufacturing capabilities by providing manufacturing design services for printed circuit boards, backplanes and enclosures. Our offerings in design engineering include product architecture, development, integration, regulatory and qualification services; while NPI services include quick-turn prototype, functional test development and release to volume production.
We provide initial product development and detailed product design and engineering services for products such as communications base stations, optical switches and modules, set top boxes, network switches and routers, computer server and storage products and medical devices. We follow a well defined product life cycle process during our design and development as follows:
Initial Product Development. We provide a range of design and engineering services to customers to complement their initial product development efforts. During this phase, our design engineers work with our customers' product development teams to assist with product concepts, selecting key components, cost trade-offs and design reviews.
Detailed Product Design. During the detailed product development phase, we work with our customers' product development engineers to optimize product designs to improve the efficiency of the manufacturing (design for manufacturability) of these products and reduce manufacturing costs. We further analyze product design to improve the ability of tests (design for test) used in the manufacturing process to identify product defects and failures. We provide software development support for product development, including installing operating systems on hardware platforms, developing software drivers for electronic devices and developing diagnostic, production test and support software. We design components that are incorporated into our customers' products including printed circuit boards, backplanes, enclosures and cables assemblies.
Pre-production. After a detailed product design has been completed and the product is released for prototype production, we can build a prototype on a quick turnaround basis. We then analyze the feasibility of manufacturing the product and make any necessary design modifications to the prototype and re-test the prototype to validate its design. We also provide early-stage test development during the prototype phase. We evaluate prototypes to determine if they will meet safety and other standards such as standards published by Underwriters Laboratories, an independent product safety testing and certification organization and other similar domestic and international organizations. We also typically provide low-volume manufacturing to satisfy our customers' initial needs. We review the material and component content of our customers' designs with a view to designing in alternative components that may provide cost savings. Our preproduction services help our customers reduce the time required to bring new products to market.
Component Technology Design Services. We provide design and technology support for our vertically integrated components and subassemblies, including:
Printed Circuit Board and Backplane Design. We support our customers with printed circuit board and backplane design and development assistance for optimizing performance, manufacturability and cost. These printed circuit boards and backplanes incorporate high layer counts and large form factors and are used in complex products such as optical networking products and communications switches. These designs also incorporate component miniaturization technologies and other advanced technologies that increase the number and density of components that can be placed on a printed circuit board. These technologies enable OEMs to provide greater functionality in smaller products. We also provide signal integrity engineering services which enable the transmission of high speed electrical signals through a system while maintaining signal quality and data integrity.
Electro-Mechanical Design. We have mechanical design groups globally that design and engineer a variety of electro-mechanical systems for the communications, enterprise computing and storage, multimedia, industrial, semiconductor, defense, aerospace, medical and CleanTech markets. Our teams of highly skilled designers address structural, thermal, environmental, seismic, power distribution, and interconnect or cabling features of the product, and provide the regulatory compliance or certification requirements for the product and its intended environment. In addition to providing conceptual and detailed mechanical design services, our offerings include engineering analysis, DFMA (design for manufacturability and assembly), value engineering, project management, engineering documentation and qualification services - thus providing a virtual one-stop service to launch the product. Analytical capabilities cover thermal analysis and testing, stress and vibration analysis, dimensional and tolerance analysis, EMC/EMI analysis, etc. Product designs can involve a wide variety of materials, such as steel, aluminum alloys, injection molded plastics and die-castings. Our design experience covers a range of products, including indoor and outdoor wireless base station cabinets, datacom and computing racks, chassis, frames, enclosures for high-end servers, data storage systems, industrial and medical imaging systems, gaming consoles, gas analysis instrumentation, etc.
Manufacturing. Manufacturing includes the following vertically integrated manufacturing services:
Printed Circuit Boards. We have the ability to produce multilayer printed circuit boards on a global basis with high layer counts and fine line circuitry. Our ability to support NPI and quick turn fabrication followed by manufacturing in both North America and Asia allows our customers to accelerate their time to market as well as their time to volume. Standardized processes and procedures make transitioning of products easier for our customers. Our technology roadmaps provide leading-edge capabilities and higher yielding processes. Engineering teams are available on a world-wide basis to support designers in DFM analysis and assemblers with field application support.
Printed circuit boards are made of fiberglass/resin laminated material layers and contain copper circuits which interconnect and transmit electrical signals among the components that make up electronic devices. Increasing the density of the circuitry in each layer is accomplished by reducing the width of the circuit tracks and placing them closer together in the printed circuit board along with adding layers and via hole structures. We are currently capable of efficiently producing printed circuit boards with up to 60 layers and circuit track widths as narrow as two mils (50 micron) in production volumes. Specialized production equipment along with an in-depth understanding of high performance laminate materials allow for fabrication of some of the largest form factor and highest speed (in excess of 10 gigabits per second, or Gbps) backplanes available in the industry. We have also developed several proprietary technologies and processes which improve electrical performance, connection densities and reliability of printed circuit boards. Some of these technologies, such as Buried Capacitance™, have become industry standards and are licensed to other board fabricators.
Printed Circuit Board Assembly and Test. Printed circuit board assembly involves attaching electronic components, such as integrated circuits, capacitors, microprocessors, resistors and memory modules to printed circuit boards. The most common technologies used to attach components to printed circuit boards employ surface mount technology, or SMT, and pin-through-hole assembly, or PTH. SMT involves the use of an automated assembly system to place and solder components to the printed circuit board. In PTH, components are placed on the printed circuit board by insertion into holes punched in the circuit board. Components also may be attached using press-fit technology in which components are pressed into connectors affixed to the printed circuit board. We use SMT, PTH, press-fit as well as new attachment technologies that are focused on miniaturization and increasing the density of component placement on printed circuit boards. These technologies, which support the needs of our OEM customers to provide greater functionality in smaller products, include chip-scale packaging, ball grid array, direct chip attach and high density interconnect. We perform in-circuit and functional testing of printed circuit board assemblies. In-circuit testing verifies that all components have been properly inserted and attached and that the electrical circuits are complete. We perform functional tests to confirm that the board or assembly operates in accordance with its final design and manufacturing specifications. We either design and procure test fixtures and develop our own test software, or we use
our customers' test fixtures and test software. In addition, we provide environmental stress tests of the board or assembly that are designed to confirm that the board or assembly will meet the environmental stresses, such as heat, to which it will be subject.
Backplanes and Backplane Assemblies. Backplanes are very large printed circuit boards that serve as the backbones of sophisticated electronics products and provide interconnections for printed circuit boards, integrated circuits and other electronic components. We fabricate backplanes in our printed circuit board plants. Backplane fabrication is significantly more complex than printed circuit board fabrication due to the large size and thickness of the backplanes. We manufacture backplane assemblies by press fitting high density connectors into plated through holes in the bare backplane. In addition, many of the newer higher technology backplanes require SMT attachment of passive discrete components as well as high pin count ball grid array packages. These advanced assembly processes require specialized equipment and a strong focus on quality and process control. We also perform in-circuit and functional tests on backplane assemblies. We have developed proprietary technology and “know-how” which enables backplanes to run at data rates in excess of 10 Gbps. We currently have capabilities to manufacture backplanes with up to 60 layers in sizes up to 27.5x42 inches and 0.500 inches in thickness, utilizing a wide variety of high performance laminate materials. These are among the largest and most complex commercially manufactured backplanes and we are one of a limited number of manufacturers with these capabilities.
Enclosure Systems. Enclosure systems are used across all major markets to house and protect complex and fragile electronic components, modules and sub-systems, so that the system's functional performance is not compromised due to mechanical, environmental or any hostile conditions. Our enclosure manufacturing services include fabrication of cabinets, chassis, frames and racks integrated with various electronic components and sub-systems for power and thermal management, control, sensing and alarm functions. We manufacture a broad range of enclosures from basic enclosures for low end servers, to large and highly complex enclosures, such as those used in indoor and outdoor wireless base station products. We serve a variety of end markets, partnering with customers from initial concept development through integration and final system assembly and test. Our enclosure expertise is readily accessible at any of our state-of-the-art facilities that provide metal fabrication, high-volume metal stamping, plastic injection molding, aluminum die-casting and robotic welding capabilities.
Cable Assemblies. Cable assemblies are used to connect modules, assemblies and subassemblies in electronic devices. We provide a broad range of cable assembly products and services. We design and manufacture a broad range of high-speed data, radio frequency and fiber optic cabling products. Cable assemblies that we manufacture are often used in large rack systems to interconnect subsystems and modules.
Precision Machining. As part of our mission to provide complete manufacturing solutions to customers, Sanmina-SCI offers a suite of world-class precision machining services in the USA, Israel and China. We utilize advanced numerically controlled machines enabling the manufacture of components to very tight tolerances and the assembly of these components in clean environments. Capabilities include expertise in complex medium- and large-format mill and lathe machining of aluminum, stainless steel, plastics, ferrous and nonferrous alloys, and exotic alloys. We also have in-house welding, helium and hydrostatic leak-test capabilities. Through an established supply chain we do lapping, plating, anodizing, EDM, heat-treating, cleaning, laser inspection, painting and packaging. We have dedicated facilities supporting machining and complex integration with access to a suite of state-of-the-art, computer-controlled machining equipment that can satisfy the most rigorous demands for production and quality. This equipment includes fully automated “lights-out” machinery that continues production in the absence of human operators. With some of the largest horizontal milling machines in the United States we are a supplier of vacuum chamber systems for the semiconductor and flat panel display equipment markets. We also support a number of other markets such as medical, oil and gas exploration, and transportation.
Microelectronic Components and Modules. Optical and RF components are the key building blocks of many systems and we produce both passive and active components. RF and Optical modules are integrated subsystems that use a combination of industry standard and/or custom components. We are a provider of RF and optical components and systems for customers in the telecommunications, networking, medical and military markets. Our experience in RF and optical communications and networking products spans long haul/ultra long haul and metro regions for transport/transmission, as well as access and switching applications, including last mile solutions. We are currently supplying product to the 40G and 100G optical marketplace based on these technologies. Our service offerings for optical communications customers are designed to deliver end-to-end solutions with special focus on design and industrialization, optical and RF component, module and blade assembly, as well as system integration and test.
Modular Solutions™. Modular solutions are integrated subsystems that use industry standard integrated circuits
including Dynamic Random Access Memory (DRAM), non-volatile Flash Memory, Application Specific Integrated Circuits (ASICs) and controllers, microprocessors and digital signal processors. We develop and manufacture innovative DRAM Modules, Flash Memory Products, Solid-State Drives (SSDs) and Mixed Technology Devices. These solid-state high-technology products are designed to optimize the value and performance of our customers' applications in the Networking & Communications, Enterprise Computing & Storage, Defense & Aerospace, and Embedded & Industrial markets. Our advanced design and manufacturing capabilities offer superior assembly, testing, programming, and deployment solutions for all modular product needs. To maintain our leadership position as a modular solutions provider, we are continuously researching, developing and implementing next-generation solutions such as Element SSDs, Arxcis-NV™, SATADIMM, and SATA Cube™ to meet the needs of OEMs with high-performance, space-constrained and thermally challenging environments. We also provide innovative DDRI, DDRII, and DDRIII DRAM modules utilizing stacked Chip-Scale-Packaging (CSP) technology, Ram-Stack™, offering high densities in ultra small form factors. We integrate both standard and custom modules in the products we manufacture. We rely on our superior quality, flexibility and quick response to bring to market the solutions that meet our customers' needs at a competitive cost.
Final System Assembly and Test. We provide final system assembly and test in which assemblies and modules are combined to form complete, finished products. We often integrate printed circuit board assemblies manufactured by us with enclosures, cables and memory modules that we also produce. Our final assembly activities also may involve integrating components and modules that others manufacture. The complex, finished products that we produce typically require extensive test protocols. Our test services include both functional and environmental tests. We also test products for conformity to applicable industry, product integrity and regulatory standards. Our test engineering expertise enables us to design functional test processes that assess critical performance elements including hardware, software and reliability. By incorporating rigorous test processes into the manufacturing process, we can help to assure our customers that their products will function as designed. Products for which we currently provide final system assembly and test include wireless base stations, wireline communications switches, optical networking products, high-end servers, etc.
Direct Order Fulfillment. We provide direct order fulfillment for our OEM customers. Direct order fulfillment involves receiving customer orders, configuring products to quickly fill the orders and delivering the products either to the OEM, a distribution channel, such as a retail outlet, or directly to the end customer. We manage our direct order fulfillment processes using a core set of common systems and processes that receive order information from the customer and provide comprehensive supply chain management including procurement and production planning. These systems and processes enable us to process orders for multiple system configurations and varying production quantities including single units. Our direct order fulfillment services include BTO and CTO capabilities. BTO involves building a system having the particular configuration ordered by the OEM customer. CTO involves configuring systems to an end customer's order. The end customer typically places this order by choosing from a variety of possible system configurations and options. We are capable of meeting a 48 to 72 hour turn-around-time for BTO and CTO by using advanced manufacturing processes and a real-time warehouse management and data control system on the manufacturing floor. We support our direct order fulfillment services with logistics that include delivery of parts and assemblies to the final assembly site, distribution and shipment of finished systems and processing of customer returns. Our systems are sufficiently flexible to support direct order fulfillment for a variety of different products, such as servers, workstations, set-top boxes, medical devices, scanners, printers and monitors.
Global Supply Chain Management
We purchase large quantities of electronic components and other raw materials from a range of suppliers. Our global supply chain management primary task involves in consolidating our global spend to create the synergy and leverage to drive our supply base for better cost competitiveness and more favorable terms. As a result, we often receive more favorable terms from suppliers which can enable us to provide our customers with greater cost reductions than they can obtain themselves. Our strong supplier relationships also often enable us to obtain electronic components and other raw materials that are in short supply or return excess inventories to suppliers even when they are not contractually obligated to accept them.
Supply chain management also involves the planning, purchasing and warehousing of product components. The other objective of our supply chain management services is to reduce excess component inventory in the supply chain by scheduling deliveries of components at a competitive price and on a just-in-time, as-and-when-needed basis. We use sophisticated production management systems to manage our procurement and manufacturing processes in an efficient and cost effective manner. We collaborate with our customers to enable us to respond to their changing component requirements for their products and to reflect any changes in these requirements in our production management systems. These systems often enable us to forecast future supply and demand imbalances and develop strategies to help our customers manage their component requirements. Our enterprise-wide software systems provide us with company-wide information regarding component inventories and orders to standardize planning and purchasing at the plant level. These systems enable us to transfer product
components between plants to respond to changes in customer requirements or to address component or other raw material shortages.
Our End Markets
We have targeted markets that we believe offer significant growth opportunities and for which OEMs sell complex products that are subject to rapid technological change. We believe that markets involving complex, rapidly changing products offer us opportunities to produce products with higher margins because these products require higher value-added manufacturing services and may also include our advanced vertically integrated components. Our approach to our target markets is two-fold—we intend to strengthen our significant presence in the communications and enterprise computing and storage markets market, while also focusing on other under-penetrated target markets, including the medical, automotive, industrial and semiconductor capital equipment, and defense and aerospace, and CleanTech industries, many of which have not extensively relied upon EMS companies in the past. Our diversification across market segments and customers helps mitigate our dependence on any particular market.
Communications Infrastructure: Wireless and Wireline Access, Optical and Wireline Transmission and Switching and Enterprise Networking. In the communications sector, we focus on infrastructure equipment. This includes wireless and wireline access and transmission systems, optical networking and transmission and enterprise networking systems. Our product design and engineering staff has extensive experience designing and industrializing advanced communications products and components for these markets. Products we manufacture include point-to-point microwave systems, wireless base stations, satellite receivers and various radio frequency appliances, optical switches and transmission hardware and wireline access equipment including switches and routers among others. We also design and manufacture optical, RF and microelectronic components which are key devices in many of these products.
Enterprise Computing and Storage. We provide CTO and BTO services to the enterprise computing and storage market. We tightly couple our vertically integrated supply chain with manufacturing and logistics allowing for assembly and distribution of products to be completed more quickly with high quality standards and at low cost. Our vertical integration capabilities include racks, enclosures, cables, complex multi-layer printed circuit boards, printed circuit assemblies and backplanes. In addition, we have designed and developed some of the most compact and powerful storage devices available on the market today which we have coupled with our global, vertically integrated supply chain and manufacturing capabilities to deliver true end-to-end, no touch, cost-effective EMS solutions to the data storage industry.
Multimedia. We manufacture digital set-top boxes, point of sale equipment, digital cameras, digital home gateways, professional audio-video equipment and internet protocol entertainment devices. For our multimedia OEM customers, we manage the production process for multimedia products including product design and engineering, test development, supply chain management, manufacturing of printed circuit boards and assemblies, final system assembly and test, direct order fulfillment including our BTO and CTO capabilities, and repair services.
Industrial and Semiconductor Systems. Our expertise in manufacturing highly complex systems includes production of industrial and semiconductor capital equipment, front-end environmental chambers, computer controllers and test and inspection equipment. We also have significant experience in manufacturing highly complex systems such as, process chambers, photolithography tools, etch tools, wafer handling interfaces, flat panel display test and repair equipment, chem-mech planarization tools, optical inspection and x-ray equipment, explosive detection equipment, and large format printing plate machines.
Defense and Aerospace. We offer our end-to-end services to the defense and aerospace industry. We believe that this industry currently represents a significant growth opportunity for us due in part to the growing desire of defense and aerospace OEMs to outsource non-core manufacturing activities in order to reduce costs. We believe our experience in serving the aerospace industry, as well as our product design and engineering capabilities, represent key competitive strengths for us in the defense and aerospace market. Defense and aerospace products that we design and manufacture include avionics systems, weapons guidance systems, tactical and secure network communications systems, detection systems for homeland defense, cockpit communications systems and space systems.
Medical. We provide comprehensive manufacturing and related services to the medical industry including design, logistics and regulatory approval support. The manufacturing of products for the medical industry often requires compliance with domestic and foreign regulations including the Food and Drug Administration's or FDA's quality system regulations and the European Union's medical device directive. In addition to complying with these standards, our medical manufacturing facilities comply with ISO 13485-2003 (formerly EN 46002) and ISO 9001:2000. Sanmina manufactures a broad range of medical systems including blood glucose meters, computed tomography scanner assemblies, respiration systems, blood
analyzers, cosmetic surgery systems, ultrasound imaging systems and a variety of patient monitoring equipment.
CleanTech. We are committed to serving companies leading the clean technology, or CleanTech, revolution in the solar, wind, fuel cell, battery systems, LED lighting and smart infrastructure industries. We leverage traditional electronics manufacturing services (EMS) for CleanTech customers in areas related to power electronics, control and distribution, smart meters and full-system integration. Beyond traditional EMS, our extensive range of electro-mechanical design and complex system manufacturing capabilities are an excellent fit across all CleanTech segments. Our manufacturing operations are strategically located in close proximity to CleanTech “hot spots”.
Automotive. In the automotive industry, we manufacture different types of sensors, body controllers, engine control units, radios, HVAC control heads and blower modules as well as cables for entertainment solutions. We also provide design support, product and process qualification, manufacturing, supply chain management, supplier quality assurance and end-of-life services. All our automotive dedicated factories are TS 16949 certified and provide printed circuit boards, printed circuit board assemblies and cables as well as final systems.
Customers
A relatively small number of customers have historically generated a significant portion of our net sales. Sales to our ten largest customers represented 49.9%, 48.0% and 48.2% of our net sales for 2010, 2009 and 2008, respectively. For 2010, one customer, EchoStar Corporation, represented approximately 11% of our net sales. For 2009 and 2008, no customer represented 10% or more of our net sales.
We seek to establish and maintain long-term relationships with our customers and have served many of our principal customers for several years. Historically, we have had substantial recurring sales from existing customers. We have also expanded our customer base through our marketing and sales efforts as well as acquisitions. We have been successful in broadening relationships with customers by providing vertically integrated products and services as well as multiple products and services in multiple locations.
We typically enter into supply agreements with our major OEM customers with terms ranging from three to five years. Our supply agreements with our OEM customers generally do not obligate the customer to purchase minimum quantities of products. However, the customer typically remains liable for the cost of the materials and components that we have ordered to meet the customer's production forecast but which are not used, provided that the material was ordered in accordance with an agreed-upon procurement plan. In some cases, the procurement plan contains provisions regarding the types of materials for which our customers will assume responsibility. Our supply agreements typically contain provisions permitting cancellation and rescheduling of orders upon notice and subject, in some cases, to cancellation and rescheduling charges. Order cancellation charges typically vary by product type and depend upon how far in advance of shipment a customer notifies us of the cancellation of an order. In some circumstances, our supply agreements with customers provide for cost reduction objectives during the term of the agreement.
We generally do not obtain firm, long-term commitments from our customers under supply agreements. As a result, customers can cancel their orders, change production quantities or delay orders. Uncertain economic conditions and our general lack of long-term purchase contracts with our customers make it difficult for us to accurately predict revenue over the long-term. Even in those cases in which customers are contractually obligated to purchase products from us or repurchase unused inventory from us that we have ordered for them, we may elect not to immediately enforce our contractual rights because of the long-term nature of our customer relationships or for other business reasons and may instead, negotiate accommodations with customers regarding particular situations.
Backlog
We generally do not obtain firm, long-term commitments from our customers. Instead, our procurement of inventory and our manufacturing activities are based primarily on forecasts provided from our customers. This enables us to minimize the time lapse between receipt of a customer's order and delivery of product to the customer. OEM customers typically do not make firm orders for the delivery of products more than thirty to ninety days in advance. Additionally, customers may cancel or postpone scheduled deliveries, generally without significant penalty. Therefore, we do not believe that the backlog of expected product sales covered by firm orders is a meaningful measure of future sales.
Marketing and Sales
Our sales efforts are organized and managed on a regional basis with regional sales managers in geographic regions in the United States and internationally.
We develop relationships with our customers and market our vertically integrated manufacturing services through our direct sales force, customer support specialists and representative firms. Our sales resources are directed at multiple management and staff levels within target accounts. Our direct sales personnel and representative firms work closely with the customers' engineering and technical personnel to better understand their requirements. Our marketing and sales staff supports our business strategy of providing end-to-end services by encouraging cross-selling of vertically integrated manufacturing services and component manufacturing across a broad range of major OEM products. To achieve this objective, our marketing and sales staff works closely with our various manufacturing and design and engineering groups and engages in marketing and sales activities targeted towards key customer opportunities.
Each of our key customer accounts is managed by a dedicated account team including a global business manager directly responsible for account management. Global business managers coordinate activities across divisions to effectively satisfy customer requirements and have direct access to our senior management to quickly address customer concerns. Local customer account teams further support the global teams and are linked by a comprehensive communications and information management infrastructure.
Information concerning the geographic distribution of our sales can be found in note 16 of the notes to our consolidated financial statements.
Competition
We face competition from other major global EMS companies such as Benchmark Electronics, Inc., Celestica, Inc., Flextronics International Ltd., Hon Hai (Foxconn), Jabil Circuits, Inc. and Plexus Corp., as well as other EMS companies that often have a regional product, service or industry specific focus. In addition, our potential customers may also compare the benefits of outsourcing their manufacturing to us with the merits of manufacturing products themselves.
We compete with different companies depending on the type of service or geographic area. We believe that the primary competitive factors in our industry include manufacturing technology, quality, delivery, responsiveness, provision of value-added services and price. We believe our primary competitive strengths include our ability to provide global end-to-end services, our product design and engineering resources, our advanced technologies, our high quality manufacturing assembly and test services, our customer focus and responsiveness, our expertise in serving diverse end markets and our experienced management team.
Intellectual Property
We hold various United States and foreign patents primarily related to printed circuit board technologies, methods of manufacturing printed circuit boards, enclosures, memory modules and enterprise computing (servers and storage). For other proprietary processes, we rely primarily on trade secret protection. We also have registered trademarks in the United States and certain other countries. A number of our patents covering certain aspects of our manufacturing processes or products have expired or will expire in the near future. Such expirations reduce our ability to assert claims against competitors or others who use similar technology.
From time to time, we receive communications from third parties that include assertions with respect to intellectual property rights. Although we have no knowledge that our products and/or services infringe upon the intellectual property rights of third parties in any material respect, we cannot assure you that third parties will not assert infringement claims against us in the future. If such an assertion were to be made, it may become necessary or useful for us to enter into licensing arrangements or to resolve such an issue through litigation. However, we cannot assure you that such license rights would be available to us on commercially acceptable terms, if at all, or that any such litigation would be resolved favorably. Additionally, such litigation could be lengthy and costly and could materially affect our financial condition regardless of the outcome of such litigation.
Environmental Controls
We are subject to a variety of local, state and federal environmental laws and regulations in the United States, as well as foreign laws and regulations relating to the treatment, storage, use, discharge, emission and disposal of chemicals, solid waste and other hazardous materials used during our manufacturing processes. We are also subject to occupational safety and
health laws, product take back, product labeling and product content requirements. Proper waste disposal is a major consideration in particular for printed circuit board manufacturers because metals and chemicals are used in the manufacturing process. Water used in the printed circuit board manufacturing process must be treated to remove metal particles and other contaminants before it can be discharged into municipal sanitary sewer systems. We operate on-site wastewater treatment systems at our printed circuit board manufacturing plants in order to treat wastewater generated in the fabrication process.
In addition, although the electronics assembly process generates significantly less wastewater than printed circuit board fabrication, maintenance of environmental controls is also important in the electronics assembly process because such operations can generate lead dust. Upon vacating a facility, we are responsible for remediating the lead dust from the interior of the manufacturing facility. Although there are no applicable standards for lead dust remediation in manufacturing facilities, we endeavor to make efforts to remove the residues. To date, lead dust remediation costs have not been material to our operations. We also monitor for airborne concentrations of lead in our buildings and are not aware of any significant lead concentrations in excess of the applicable OSHA or other local standards.
We have a range of corporate programs in place with regard to environmental compliance and reduction of the use of hazardous materials in manufacturing. In the environmental compliance area, we have developed corporate-wide standardized environmental management systems, auditing programs and policies to enable us to better manage environmental compliance activities. Our facilities are also certified under ISO 14001, a set of standards and procedures relating to environmental compliance management. In addition, the electronics industry is subject to the European Union's Restrictions of Hazardous Substances, or RoHS, and Waste Electrical and Electronic Equipment, or WEEE, directives which took effect beginning in July 2006. Parallel initiatives have been adopted in other jurisdictions, including several states in the United States and the Peoples' Republic of China. RoHS limits the use of lead, mercury and certain other specified substances in electronics products and WEEE requires producers to assume responsibility for the collection, recycling and management of waste electronic products and components. We have implemented procedures to make our manufacturing process compliant with RoHS and the European Union's Registration, Evaluation and Authorization of Chemicals (REACH) legislation and we believe products sold by us into countries with restrictions on the concentrations of hazardous materials contained in those products comply with such restrictions. In the case of WEEE, the compliance responsibility rests primarily with OEMs rather than with EMS companies.
Asbestos containing materials, or ACM, are present at several of our manufacturing facilities. Although the ACM is being managed and controls have been put in place pursuant to ACM operations and maintenance plans, the presence of ACM could give rise to remediation obligations and other liabilities. No third-party claims relating to ACM have been brought at this time.
Our plants generally operate under environmental permits issued by governmental authorities. For the most part, these permits must be renewed periodically and are subject to revocation in the event of violations of environmental laws. Any such revocation could require us to cease or limit production at one or more of our facilities, thereby having an adverse impact on our results of operations. We have not experienced any material revocations to date.
Primarily as a result of certain of our acquisitions, we have incurred liabilities associated with environmental contamination at certain of our facilities. These liabilities relate to ongoing investigation and remediation activities at a number of sites, including our facilities located in Irvine, California (a former facility acquired as part of our acquisition of Elexsys); Owego, New York (a current facility that we acquired with our acquisition of Hadco Corporation); Derry, New Hampshire (a non-operating facility of Hadco) and Fort Lauderdale, Florida (a former facility of Hadco). We have been named in a lawsuit alleging operations at our former facility in Santa Ana, California contributed to groundwater contamination. There can be no assurance that other similar third-party claims will not arise and will not result in material liability to us. In addition, there are some sites, including our facility in Gunzenhausen, Germany (acquired from Alcatel) that are known to have groundwater contamination caused by a third-party, and that third-party has provided indemnity to us for the liability.
We have also been named as a potentially responsible party at a contaminated disposal site operated by another party at the Casmalia Resources disposal site in Southern California as a result of the past disposal of hazardous waste by companies we have acquired or by our corporate predecessors. Although liabilities for such historic disposal activities have not materially affected our financial condition to date, we cannot assure you that past disposal activities will not result in liability that will materially affect us in the future.
We use environmental consultants primarily for risk assessments and remediation, including remedial investigation and feasibility studies, remedial action planning and design, and site remediation. These consultants provide information to us regarding the nature and extent of site contamination, acceptable remediation alternatives, and estimated costs associated with each remediation alternative. This information is considered by us, together with other information, when determining the appropriate amount to accrue for environmental liabilities.
Employees
As of October 2, 2010, we had 44,199 employees, including 7,696 temporary employees. None of our U.S. employees are represented by a labor union. In some international locations, our employees are represented by labor unions on either a national or plant level or are subject to collective bargaining agreements. Some foreign countries also have mandatory legal provisions regarding terms of employment, severance compensation and other conditions of employment that are more restrictive than U.S. laws. We believe our relationship with our employees is good.
Available Information
Our Internet address is http://www.sanmina-sci.com. We make available through our website, free of charge, our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission, or SEC. All reports we file with the SEC are also available free of charge via EDGAR through the SEC's website at http://www.sec.gov .
EXECUTIVE OFFICERS
The following table sets forth the name, position and age of our current executive officers and their ages as of October 2, 2010.
| | |
Name | Age | Position |
Jure Sola | 59 | Chairman of the Board and Chief Executive Officer |
Hari Pillai | 50 | President and Chief Operating Officer |
Robert Eulau | 48 | Executive Vice President and Chief Financial Officer |
Michael Tyler | 54 | Executive Vice President, General Counsel and Corporate Secretary |
Dennis Young | 59 | Executive Vice President of Worldwide Sales and Marketing |
David Pulatie | 68 | Executive Vice President of Global Human Resources |
Jure Sola has served as our Chief Executive Officer since April 1991, as Chairman of our Board of Directors from April 1991 to December 2001 and from December 2002 to present, and as Co-Chairman of our Board of Directors from December 2001 to December 2002. In 1980, Mr. Sola co-founded Sanmina and initially held the position of Vice President of Sales. In October 1987, he became our Vice President and General Manager, responsible for manufacturing operations and sales and marketing and was President from October 1989 to March 1996.
Hari Pillai joined us in 1994 and has served in manufacturing management positions since that time. In January 2002, Mr. Pillai was appointed President and General Manager of our EMS division and in October 2004 was appointed President, Global EMS operations. In October 2008, Mr. Pillai was promoted to President and Chief Operating Officer.
Robert Eulau has served as our Executive Vice President and Chief Financial Officer since September 14, 2009. Prior to joining us, he served as Executive Vice President, Chief Operating Officer and Chief Financial Officer of privately-owned Alien Technology Corporation, a developer of radio frequency identification products, from March 2006 through June 2008. Previously, he was Senior Vice President and Chief Financial Officer of publicly-traded Rambus Inc., a technology licensing company, from May 2001 through March 2006. Prior to Rambus, Mr. Eulau served over 15 years with Hewlett Packard Company in various leadership roles, including Vice President and Chief Financial Officer of HP's Business Customer Organization, and Vice President and Chief Financial Officer of HP's Computing Products business.
Michael Tyler has served as our Executive Vice President and General Counsel since April 2007. Mr. Tyler became our Corporate Secretary in June 2007. Prior to joining us, he was Senior Vice President, Chief Legal and Administrative Officer of Gateway, Inc., a major personal computer manufacturer, where he was employed from 2000-2007. Prior to that, he served as Senior Corporate Counsel International, at Northrop Grumman Corporation from 1995 to 2000, as an associate at the law firm Heller, Ehrman, White & McAuliffe from 1991 to 1995, and as a law clerk for the United States Court of Appeals for the Ninth Circuit from 1987 to 1988.
Dennis Young has served as Executive Vice President of Worldwide Sales and Marketing since March 2003. Prior to joining us, Mr. Young was Senior Vice President of Sales from May 2002 to March 2003 and Vice President of Sales from March 1998 to May 2002 of Pioneer-Standard Electronics, a provider of industrial and consumer electronic products.
David Pulatie has served as Executive Vice President of Global Human Resources since December 2008. Prior to that, he was Senior Vice President of Human Resources for Phelps Dodge Corporation, a mining concern, from March 1999 until January 2006. Previously, Mr. Pulatie had spent over 33 years in progressive U.S. and international senior human resources positions at Motorola, Inc., an electronics manufacturer, most recently as Senior Vice President, HR Government Relations.
Item 1A. Risk Factors
We may experience component shortages or price increases, which could cause us to delay shipments to customers and reduce our sales and net income.
We are dependent on certain suppliers, including limited and sole source suppliers, to provide key components we incorporate into our products. We are experiencing, and may continue to experience in the future, delays in component deliveries, which in turn could cause delays in product shipments to customers, result in reduced revenue from and have an adverse effect on our relationship with the affected customer, and our reputation generally as a reliable service provider. In addition, component shortages, whether anticipated or not, can increase our cost of goods sold and therefore decrease our gross margin since we may be required to pay higher prices for components in short supply and redesign or reconfigure products to accommodate substitute components. Additionally, we may purchase components in advance of our requirements for those components as a result of a threatened or anticipated shortage. In this event, we may incur additional inventory carrying costs, for which we may not be compensated, and have a heightened risk of exposure to inventory obsolescence, the cost of which may not be recoverable from our customers. Such costs would reduce our margins and net income. Finally, the growing scarcity of such components may require us to look to second tier vendors or to procure components through brokers. Such components may be of lesser quality than those otherwise available and could cause us to incur costs to qualify such components or to replace them if they prove to be defective. In some cases, suppliers seek to obtain credit insurance for our or our subsidiaries' payment obligations as a condition to continuing to do business with us. Should such insurance not be available or if we are not otherwise able to guarantee our subsidiaries' payment obligations, our ability to continue to procure components and deliver manufactured products to our customers could be adverse impacted.
Continued adverse market conditions in the electronics industry could reduce our future sales and earnings per share.
The business environment in the electronics industry has been challenging recently due to adverse worldwide economic conditions. In particular, there has been an erosion of global consumer confidence amidst concerns over declining asset values, price instability, geopolitical issues, the availability and cost of credit, rising unemployment, and the stability and solvency of financial institutions, financial markets, businesses, and sovereign nations. These concerns slowed global economic growth and resulted in recessions in many countries, including in the U.S., Europe and certain countries in Asia. The conditions have resulted, and may result in the future, in our customers delaying purchases of the products we manufacture for them and our customers placing purchase orders for lower volumes of products than previously experienced or anticipated. We cannot accurately predict future levels of demand for our customers' electronics products. Consequently, our past operating results, earnings and cash flows may not be indicative of our future operating results, earnings and cash flows.
If these economic conditions continue to exist, in addition to our customers or potential customers reducing or delaying orders, a number of other negative effects on our business could result, including the insolvency of key suppliers, which could result in production delays, shorter payment terms from suppliers due to reduced availability of credit default insurance in the market, the inability of customers to obtain credit, and the insolvency of one or more customers. Any of these effects could impact our ability to effectively manage inventory levels and collect receivables, increase our need for cash, and decrease our net revenue and profitability.
Many of the industries to which we provide products have previously experienced significant financial difficulty, with some of the participants filing for bankruptcy. Such significant financial difficulty, if experienced by one or more of our customers, may negatively affect our business due to the decreased demand of these financially distressed customers, the potential inability of these companies to make full payment on amounts owed to us, or both. For example, one of our customers, Nortel Networks, has filed a petition for reorganization under bankruptcy law. As a result of this filing, in the first quarter of 2009, we reversed revenue and recorded an inventory provision in an aggregate amount of $10 million with respect to this customer. We do not carry insurance against the risk of customer default on their payment obligations to us.
We may be unable to obtain sufficient financing to reduce our debt levels or maintain or expand our operations, which may cause our stock price to fall and reduce the business our customers and vendors do with us.
Our liquidity needs are largely dependent on changes in working capital, including investments in manufacturing inventory, facilities and equipment, the extension of trade credit by our suppliers, repayments of obligations under outstanding indebtedness and repurchases of our outstanding debt. In order to allow us to better manage our working capital requirements, we entered into a five-year $135 million asset-backed credit facility in November 2008, which we later increased to $235 million. Should we need additional sources of liquidity above and beyond such facilities, we cannot be certain that financing will be available on acceptable terms or at all. In addition, the amounts borrowable under our credit facility depend upon our asset levels and, as such, there is no guarantee that sufficient amounts will be available to borrow therefrom when needed. In
this regard, we were eligible to borrow approximately $115.9 million under our credit facility as of October 2, 2010. In the event we need additional capital, there is no guarantee that the debt or equity markets will be receptive to our efforts to raise additional capital. New financing arrangements, if available, could result in us issuing additional equity securities, which could cause dilution to existing stockholders. If additional or continued financing, including the continued extension of trade credit by our suppliers, is not available when required, our ability to repay, reduce or refinance our debt levels, maintain or increase our rates of production and expand our manufacturing capacity, as well as our overall liquidity, will be harmed, which could cause our stock price to fall and reduce our customers' and vendors' willingness to do business with us.
We could experience credit problems with our customers, which would reduce our future revenues and net income.
While we seek to mitigate the impact of collection problems with our customers on our financial results by evaluating their creditworthiness on an ongoing basis and by maintaining an allowance for doubtful accounts that is assessed for adequacy quarterly, recent economic conditions have caused an increasing number of our customers to extend or default on their payments, declare bankruptcy or both. For example, one of our customers, Nortel Networks, filed a petition for reorganization under bankruptcy law. As a result of this filing, in the first quarter of 2009, we reversed revenue and recorded an inventory provision in an aggregate amount of $10 million with respect to this customer. In addition, in the third quarter of 2010, we increased our bad debt reserve due to customer defaults. Should customer defaults increase substantially or exceed the level of our allowance, our revenue, net income and cash position would be reduced, perhaps significantly.
We are subject to intense competition in the EMS industry which could cause us to lose sales and therefore hurt our financial performance.
The EMS industry is highly competitive and the industry has been experiencing a surplus of manufacturing capacity, particularly in light of the recent slowdown in the U.S. and international economies. Our competitors include major global EMS providers such as Celestica, Inc., Flextronics International Ltd., Hon Hai (Foxconn) and Jabil Circuit, Inc., as well as other EMS companies that have a regional, product, service or industry specific focus. Some of those companies have greater manufacturing and financial resources than we do. We also face competition from current and potential OEM customers who may elect to manufacture their own products internally rather than outsourcing to EMS providers.
We may not be able to offer prices as low as some of our competitors because those competitors may have lower operating costs as a result of their geographic location or the services they provide or because these competitors are willing to provide EMS services at prices that result in lower gross margins in order to utilize more of their capacity. If we are unable or unwilling to offer prices that are competitive with other EMS companies, our net sales may decline. There can be no assurance that we will not lose business in the future in response to such competitive pricing or other inducements which may be offered by our competitors.
Our operating results are subject to significant uncertainties, which make predictability of our future sales and net income difficult.
Our operating results are subject to significant uncertainties, including:
| |
• | conditions in the economy as a whole and in the electronics industry; |
| |
• | component shortages, which could cause us to be unable to meet customer delivery schedules; |
| |
• | timing of orders from customers and the accuracy of their forecasts; |
| |
• | timing of expenditures in anticipation of increased sales, customer product delivery requirements and shortages of components or labor; |
| |
• | mix of products ordered by and shipped to major customers, as high volume and low complexity manufacturing services typically have lower gross margins than more complex and lower volume services; |
| |
• | degree to which we are able to utilize our available manufacturing capacity; |
| |
• | our ability to effectively plan production and manage our inventory and fixed assets; |
| |
• | customer insolvencies resulting in bad debt or inventory exposures that are in excess of our reserves; |
| |
• | our ability to efficiently move manufacturing activities to lower cost regions without adversely affecting customer relationships and while controlling costs related to the closure of facilities and employee severance; |
| |
• | pricing and other competitive pressures; |
| |
• | fluctuations in the values of our assets, including real property and assets held for sale, which could result in charges to income; |
| |
• | fluctuations in component prices; |
| |
• | political and economic developments in countries in which we have operations; |
| |
• | timing of new product development by our customers which creates demand for our services; |
| |
• | levels of demand in the end markets served by our customers; |
| |
• | volatility of foreign currency exchange rates; and |
| |
• | changes in our tax provision due to our estimates of pre-tax income in the jurisdictions in which we operate. |
A portion of our operating expenses is relatively fixed in nature and planned expenditures are based in part on anticipated orders, which are difficult to predict. If we do not receive anticipated orders as expected, our profitability will decline. Moreover, our ability to reduce our costs as a result of current or future restructuring efforts may be limited because consolidation of operations can be a costly and lengthy process to complete.
Our strategy to pursue higher margin business depends in part on the success of our components business, which if not successful, could cause our future gross margins and operating results to be lower.
Our components business, which includes PCB, mechanical systems, optical components and cabling manufacturing, is a key part of our strategy to grow our future margins and profitability by expanding our vertical integration capabilities. In order to grow this portion of our business profitably, we must continue to make substantial investments in the development of our components capabilities, in research and development activities, test and tooling equipment and skilled personnel. Given the relatively higher fixed cost structure of this business, our success is greatly dependent upon obtaining sufficient orders for our components products which is difficult to predict. The success of our components business also depends on our ability to achieve commercially viable production yields and to manufacture components in commercial quantities to the specifications and quality standards required by customers. In particular, our customers require that all new components used in their products be qualified in advance. Such process can be costly both in terms of time and cost and may not result in the customers' acceptance of our components. Any of these factors could cause components revenue or margins to be less than expected, which would have an overall adverse effect on our revenues and profitability.
Our early redemptions of debt and repurchases of stock have reduced our working capital and liquidity.
During 2009, we repurchased $46.9 million of our debt in the open market and we also repurchased 10.1 million shares of our common stock for an aggregate of $29.2 million. Further, during 2010, we redeemed $195.7 million of our long-term debt in the open market. These repurchases and redemptions have reduced our working capital. Although the redemptions of debt improve our operating results by reducing our interest expense, the redemptions and stock repurchases have reduced our liquidity. If we should repurchase or redeem additional debt or equity, our working capital and liquidity would be further reduced.
Adverse changes in the key end markets we target could harm our business by reducing our sales.
We provide EMS services to companies that sell products in the communications networks; industrial, defense and medical; enterprise computingand storage; and multimedia markets. Adverse changes in these markets could reduce demand for our customers' products and make these customers more sensitive to the cost of our EMS services, either of which could reduce our sales, gross margins and net income. Factors affecting any of our customers' industries in general, or our customers in particular, could seriously harm our business. These factors include:
| |
• | short product life cycles leading to continuing new requirements and specifications for our customers products, the failure of which to meet could cause us to lose business; |
| |
• | failure of our customers' products to gain widespread commercial acceptance which could decrease the volume of orders customers place with us; and |
| |
• | recessionary periods in our customers' markets which decrease orders from affected customers. |
We rely on a relatively small number of customers for a substantial portion of our sales, and declines in sales to these customers would reduce our net sales and net income.
One customer represented approximately 11% of our net sales and sales to our ten largest customers represented 49.9% of our net sales during fiscal 2010. We expect to continue to depend upon a relatively small number of customers for a significant percentage of our sales. Consolidation among our customers may further concentrate our business in a limited number of customers and expose us to increased risks related to dependence on a small number of customers. In addition, a significant reduction in sales to any of our large customers or significant pricing and margin pressures exerted by such a customer would adversely affect our operating results. In the past, some of our large customers have significantly reduced or delayed the volume of manufacturing services ordered from us as a result of changes in their business, consolidations or divestitures or for other reasons. In particular, certain of our customers have from time to time entered into manufacturing divestiture transactions with other EMS companies, and such transactions could adversely affect our revenues with these customers. We cannot assure you that present or future large customers will not terminate their manufacturing arrangements with us or significantly change, reduce or delay the amount of manufacturing services ordered from us, any of which would reduce our net sales and net income.
As a result of our components ordering policies, and customer-requested ship dates, we may incur carrying costs or not be compensated for components, work-in-process or finished goods, which would decrease our margins and net income.
In order to satisfy customer orders, we are frequently required to order components and other parts in advance of customer payment, particularly for long lead-time items. Furthermore, we may be required to keep additional components, work-in-process and finished goods in inventory in order to meet customer delivery dates. While our supply agreements with our customers generally allocate most of the liability for payment for such items to the customers, we may nonetheless incur additional carrying costs or not ultimately be compensated for these items should the customer default upon its obligations. To the extent we incur any such costs, our gross margins and net income would be reduced.
We generally do not obtain long-term volume purchase commitments from customers and, therefore, cancellations, reductions in production quantities and delays in production by our customers could reduce our sales and net income.
We generally do not obtain firm, long-term purchase commitments from our customers and our bookings may generally be cancelled prior to the scheduled shipment date. Customers may cancel their orders, reduce production quantities or delay production for a number of reasons, including significant decreases in demand for their products and services. Although the customer is generally liable for finished goods and work-in-process at the time of cancellation, we may be unable or, for other business reasons, choose not to enforce our contractual rights. Cancellations, reductions or delays of orders by customers would:
| |
• | reduce our sales and net income by decreasing the volumes of products that we manufacture for our customers; |
| |
• | delay or eliminate recovery of our expenditures for inventory purchased in preparation for customer orders; and |
| |
• | lower our asset utilization, which would result in lower gross margins and lower net income. |
In addition, customers are increasingly requiring that we transfer the manufacturing of their products from one facility to another to achieve cost reductions and other objectives. These transfers have resulted in increased costs to us due to facility downtime or less than optimal utilization of our manufacturing capacity. These transfers also have required us to close or reduce operations at certain facilities, particularly those in high cost locations such as the United States, Canada and Western Europe, and as a result we have incurred significant costs for the closure of facilities, employee severance and related matters. We also have encountered occasional delays and complications related to the transition of manufacturing programs to new locations. We may be required to relocate our manufacturing operations in the future and, accordingly, we may incur additional costs that decrease our net income.
If demand for our higher-end, higher margin manufacturing services does not increase, our future gross margins and operating results may be lower than expected.
We typically earn lower gross margins when we provide less complex EMS services. We experience continued pressure from OEMs to reduce prices, and competition remains intense. Pricing pressure is typically more intense for less complex, lower margin EMS services. This price competition has affected, and could continue to adversely affect, our gross margins. If demand for our higher-end, higher margin manufacturing services does not increase in the future, our gross margins and operating results in future periods may be lower than expected.
Consolidation in the electronics industry may adversely affect our business by increasing competition or customer buying power and increasing prices we pay for components.
Consolidation in the electronics industry among our customers, our suppliers and/or our competitors may increase as companies combine to achieve further economies of scale and other synergies. Consolidation in the electronics industry could result in an increasing number of very large electronics companies offering products in multiple sectors of the electronics industry. The significant purchasing and market power of these large companies could increase competitive pressures on us. In addition, if one of our customers is acquired by another company that does not rely on us to provide EMS services either because it has its own production facilities or relies on another provider of similar services, we may lose that customer's business. In addition, consolidation in the electronics industry may also result in excess manufacturing capacity among EMS companies, which could drive our profitability down. Similarly, consolidation among our suppliers could result in a sole or limited source for certain components used in our customers' products. Any such consolidation could cause us to be required to pay increased prices for such components, which would reduce our gross margin and profitability.
We are subject to risks arising from our international operations.
We conduct our international operations primarily in Asia, Latin America, Canada and Europe, and we continue to consider additional opportunities to make foreign acquisitions and construct new foreign facilities. We generated 79.0% of our net sales from non-U.S. operations in fiscal 2010 and a significant portion of our manufacturing material was provided by international suppliers during this period. As a result of our international operations, we are affected by economic and political conditions in foreign countries, including:
| |
• | the imposition of government controls; |
| |
• | compliance with U.S. and foreign laws concerning trade; |
| |
• | difficulties in obtaining or complying with export license requirements; |
| |
• | labor unrest and difficulties in staffing; |
| |
• | inflexible employee contracts in the event of business downturns; |
| |
• | coordinating communications among and managing international operations; |
| |
• | fluctuations in currency exchange rates; |
| |
• | increases in duty and/or income tax rates; |
| |
• | adverse rulings in regards to tax audits; |
| |
• | excess costs associated with reducing employment or shutting down facilities; |
| |
• | misappropriation of intellectual property; and |
| |
• | constraints on our ability to maintain or increase prices. |
Our operations in certain foreign locations receive favorable income tax treatment in the form of tax holidays or other incentives. In the event that such tax holidays or other incentives are not extended, are repealed, or we no longer qualify for such programs, our taxes may increase, which would reduce our net income.
Additionally, a significant portion of our worldwide cash reserves are generated by, and therefore held in, foreign jurisdictions. Certain of such jurisdictions restrict the amount of cash that can be transferred to the U.S or impose taxes and penalties on such transfers of cash. To the extent we have excess cash in foreign locations that could be used in, or is needed by, our U.S. operations, we may incur significant taxes to repatriate these funds.
We operate in countries that have experienced political unrest or instability or government controls over the conduct of business, including China, India, Thailand and other countries in Southeast Asia. Recently, in China, labor disputes and strikes based partly on wages have slowed or stopped production at certain manufacturers. In some cases, employers have responded by significantly increasing the wages of workers at such plants. In addition, regulatory authorities and others have increased their scrutiny of labor conditions in countries in which we operate. To the extent such developments result in more burdensome labor laws and regulations or require us to increase the wages of employees, our ability to adequately staff our plants and to manufacture and ship products in those jurisdictions could be adversely affected, our margins and net income could be reduced and our reputation as a reliable supplier could be negatively impacted.
To respond to competitive pressures and customer requirements, we may further expand internationally in lower cost locations, particularly in Asia, Eastern Europe and Latin America. As we pursue continued expansion in these locations, we may incur additional capital expenditures. In addition, the cost structure in certain countries that are now considered to be favorable may increase as economies develop or as such countries join multinational economic communities or organizations, causing local wages to rise. As a result, we may need to continue to seek new locations with lower costs and the employee and infrastructure base to support electronics manufacturing. We cannot assure you that we will realize the anticipated strategic benefits of our international operations or that our international operations will contribute positively to our operating results.
Our international sales are subject to laws relating to trade, export controls and foreign corrupt practices, the violation of which could adversely affect our operations.
We are required to comply with all applicable domestic and foreign export control laws, including the International Traffic in Arms Regulations (“ITAR”) and the Export Administration Regulations (“EAR”). Some items manufactured by us are controlled for export by the United States Department of Commerce's Bureau of Industry and Security under the EAR. In addition, we are subject to the Foreign Corrupt Practices Act and international counterparts that, generally, bar bribes or unreasonable gifts for foreign governments and officials. Violation of any of these laws or regulations could result in significant sanctions, including large monetary penalties and suspension or debarment from participation in future government contracts, which could reduce our future revenue and net income.
We are subject to a number of U.S. governmental procurement rules and regulations, the failure to comply with which could result in damages or reduction of future revenue.
We are subject to a number of laws and regulations relating to the award, administration and performance of U.S. government contracts and subcontracts. Such laws and regulations govern, among other things, price negotiations, cost accounting standards and other aspects of performance under government contracts. These rules are complex and our performance under them is subject to audit by the Defense Contract Audit Agency and other government regulators. If an audit or investigation reveals a failure to comply with regulations or other improper activities, we may be subject to civil or criminal penalties and administrative sanctions by either the government or the prime customer, including termination of the contract, payment of fines and suspension or debarment from doing further business with the U.S. government. Any of these actions would increase our expenses, reduce our revenue and damage our reputation as a reliable government supplier.
We can experience losses due to foreign exchange rate fluctuations, which would reduce our net income.
Because we manufacture and sell a substantial portion of our products abroad, our operating costs are subject to fluctuations in foreign currency exchange rates. If the U.S. dollar weakens against the foreign currencies in which we denominate certain of our trade accounts payable, fixed purchase obligations and other expenses, the U.S. dollar equivalent of such expenses would increase. We use financial instruments, primarily short-term foreign currency forward contracts, to hedge certain forecasted foreign currency commitments arising from trade accounts receivable, trade accounts payable and fixed purchase obligations. Our foreign currency hedging activities depend largely upon the accuracy of our forecasts of future sales, expenses, capital expenditures and monetary assets and liabilities. As such, our foreign currency forward contracts may exceed or not cover our full exposure to exchange rate fluctuations. If these hedging activities are not successful, we may experience significant unexpected expenses from fluctuations in exchange rates. Although we believe our foreign exchange hedging policies are reasonable and prudent under the circumstances, we can provide no assurances that we will not experience losses arising from currency fluctuations in the future, which could be significant.
Unanticipated changes in our tax rates or exposure to additional income tax liabilities could increase our taxes and decrease our net income.
We are subject to income, sales, value-added and other taxes in the United States and various foreign jurisdictions. Significant judgment is required in determining our worldwide provision for taxes and, in the ordinary course of business, there
are many transactions and calculations for which the ultimate tax determination is uncertain. Our effective tax rates could be adversely affected by changes in the mix of earnings in countries with differing statutory tax rates, changes in the valuation of deferred tax assets and liabilities, changes in tax laws and other factors. Our tax determinations are regularly subject to audit by tax authorities and developments in those audits could adversely affect our tax provisions, including through assessment of back taxes, interest and penalties. Although we believe that our tax estimates are reasonable, the final determination of tax audits or tax disputes may be different from what is reflected in our historical tax provisions which could lead to an increase in our taxes payable and a decrease in our net income.
Restructuring of our operations could require us to take an accounting charge which would reduce our net income.
We have incurred significant expenses related to restructuring of our operations in the past. For example, we have moved, and may continue to move, our operations from higher-cost to lower-cost locations to meet customer requirements. We have incurred costs related to workforce reductions, work stoppages and labor unrest resulting from the closure of our facilities in higher cost locations. In addition, we have incurred unanticipated costs related to the transfer of operations to lower-cost locations, including costs related to integrating new facilities, managing operations in dispersed locations and realigning our business processes. We also have incurred costs to restructure operations that have been acquired in order to integrate them into our Company. We expect to be required to record additional charges related to restructuring activities in the future, but cannot predict the timing or amount of such charges. Any such charges would reduce our net income.
Our credit arrangements contain covenants which may adversely impact our business and the failure to comply with such covenants could cause our outstanding debt to become immediately payable.
Our debt agreements do not contain financial covenants currently applicable to us, but do include a number of negative covenants, including restrictions on incurring additional debt, making investments and other restricted payments, acquiring new businesses, paying dividends and redeeming or repurchasing capital stock and debt, subject to certain exceptions. These covenants could constrain our ability to grow our business through acquisition or engage in other transactions which the covenants would otherwise restrict. In addition, such agreements include affirmative covenants requiring, among other things, that we file quarterly and annual financial statements with the SEC. If we are not able to comply with all of these covenants, for any reason, some or all of our outstanding debt could become immediately due and payable and the incurrence of additional debt under the new credit facility would not be allowed. If our cash is utilized to repay outstanding debt, we could experience an immediate and significant reduction in working capital available to operate our business.
Our failure to comply with applicable environmental laws could adversely affect our business by causing us to pay significant amounts for clean up of hazardous materials or for damages or fines.
We are subject to various federal, state, local and foreign environmental laws and regulations, including those governing the use, storage, discharge and disposal of hazardous substances and wastes in the ordinary course of our manufacturing operations. We also are subject to laws and regulations governing the recyclability of products, the materials that may be included in products, and the obligations of a manufacturer to dispose of these products after end users have finished using them. If we violate environmental laws, we may be held liable for damages and the costs of remedial actions and we may be subject to revocation of permits necessary to conduct our businesses. We cannot assure you that we will not violate environmental laws and regulations in the future as a result of human error, equipment failure or other causes. Although we estimate and regularly reassess our potential liability with respect to violations or alleged violations and accrue for such liability, we cannot assure you that our accruals will be sufficient to cover the actual costs we incur as a result of these violations or alleged violations or that no violations will not occur for which a reserve has not been established. Any increase in existing reserves or establishment of new reserves for environmental liability would reduce our net income. Our failure to comply with applicable environmental laws and regulations could also limit our ability to expand facilities or could require us to acquire costly equipment or to incur other significant expenses to comply with these laws and regulations.
Asbestos containing materials, or ACM are present at several of our manufacturing facilities. Although the ACM is being managed and controls have been put in place pursuant to ACM operations and maintenance plans, the presence of ACM could give rise to remediation obligations and other liabilities. No governmental or third-party claims relating to ACM have been brought at this time.
Our plants generally operate under environmental permits issued by governmental authorities. For the most part, these permits must be renewed periodically and are subject to revocation in the event of violations of environmental laws. Although we have not experienced any material revocations to date, any such revocation could require us to cease or limit production at one or more of our facilities, thereby having an adverse impact on our results of operations.
Primarily as a result of certain of our acquisitions, we have incurred liabilities associated with environmental contamination. These liabilities include ongoing investigation and remediation activities at a number of sites, including our facilities located in Irvine, California (a former facility acquired as part of our acquisition of Elexsys); Owego, New York (a current facility that we acquired with our acquisition of Hadco Corporation); Derry, New Hampshire (a non-operating facility of Hadco) Fort Lauderdale, Florida (a former facility of Hadco) and Phoenix, Arizona (a site we acquired with our acquisition of Hadco). We have been named in a lawsuit alleging operations at our former facility in Santa Ana, California arising from our Elexsys acquisition contributed to groundwater contamination. There can be no assurance that any other similar third-party claims will not arise and will not result in material liability to us. In addition, there are some sites, including our acquired facility in Gunzenhausen, Germany, that are known to have groundwater contamination caused by a third-party, and that third-party has provided indemnity to us for the liability.
We have also been named as a potentially responsible party at one contaminated disposal site, operated by another party at the Casmalia Resources site in Southern California, as a result of the past disposal of hazardous waste by companies we have acquired or by our corporate predecessors. Although liabilities for such historical disposal activities have not materially affected our financial condition to date, we cannot assure you that past disposal activities will not result in liability that will materially affect us in the future, nor can we provide assurance that we do not have environmental exposures of which we are unaware and which could adversely affect our operating results.
Over the years, environmental laws have become, and in the future may continue to become, more stringent, imposing greater compliance costs and increasing risks and penalties associated with violations. We operate in several environmentally sensitive locations and are subject to potentially conflicting and changing regulatory agendas of political, business and environmental groups. Changes in or restrictions on discharge limits, emissions levels, permitting requirements and material storage or handling could require a higher than anticipated level of operating expenses and capital investment or, depending on the severity of the impact of the foregoing factors, costly plant relocation.
In addition, the electronics industry became subject to the European Union's RoHS (Restriction of Hazardous Substances) and WEEE (Waste from Electrical and Electronic Equipment) directives which took effect beginning in 2005. Parallel initiatives have been adopted in other jurisdictions, including several states in the United States and the People's Republic of China. RoHS prohibits the use of lead, mercury and certain other specified substances in electronics products and WEEE requires industry OEMs to assume responsibility for the collection, recycling and management of waste electronic products and components. Although we believe we have implemented procedures to make our manufacturing process RoHS compliant, non-compliance could result in significant costs and/or penalties. In the case of WEEE, the compliance responsibility rests primarily with OEMs rather than with EMS companies. However, OEMs may turn to EMS companies for assistance in meeting their WEEE obligations, which could increase our costs.
If we manufacture or design defective products, or if our manufacturing processes do not comply with applicable statutory and regulatory requirements, we could be subject to damages and fines and lose customers.
We manufacture products to our customers' specifications, and in some cases our manufacturing processes and facilities may need to comply with applicable statutory and regulatory requirements. For example, many of the medical devices that we manufacture, as well as the facilities and manufacturing processes that we use to produce them, are regulated by the United States Food and Drug Administration. In addition, our customers' products and the manufacturing processes that we use to produce them often are highly complex. As a result, products that we design or manufacture may at times contain design or manufacturing defects, and our manufacturing processes may be subject to errors or may not be in compliance with applicable statutory and regulatory requirements. Defects in the products we design or manufacture may result in product recalls, warranty claims by customers, including liability for repair costs, delayed shipments to customers or reduced or cancelled customer orders. If these defects or deficiencies are significant, our business reputation may also be damaged. The failure of the products that we design or manufacture or of our manufacturing processes and facilities to comply with applicable statutory and regulatory requirements may subject us to legal fines or penalties and, in some cases, require us to shut down or incur considerable expense to correct a manufacturing program or facility. In addition, these defects may result in product liability claims against us. The magnitude of such claims may increase as we expand our medical, automotive, and aerospace and defense manufacturing services because defects in medical devices, automotive components and aerospace and defense systems could seriously harm users of these products. Even if our customers are responsible for defects in the design of a product, we could nonetheless be named in a product liability suit over such defects and could be required to expend significant resources defending ourselves.
We also design products on a contract basis or jointly with our customers. The design services that we provide can expose us to different or greater potential liabilities than those we face when providing our regular manufacturing services. For example, we have increased exposure to potential product liability claims resulting from injuries caused by defects in products
we design, as well as potential claims that products we design infringe third-party intellectual property rights. Such claims could subject us to significant liability for damages and, regardless of their merits, could be time-consuming and expensive to resolve. Any such costs and damages could be significant and would reduce our net income.
Failure to comply with employment and related laws could result in the payment of significant damages, which would reduce our net income; employee theft or fraud could result in loss.
We are subject to a variety of domestic and foreign employment laws, including those related to safety, discrimination, whistle-blowing, classification of employees, wages and severance payments. Such laws are subject to change as a result of judicial decisions or otherwise and there can be no assurance that we will not be found to have violated any such laws in the future. Such violations could lead to the assessment of significant fines against us by federal, state or foreign regulatory authorities or to the award of damages claims (including severance payments) against us in judicial proceedings by employees, any of which would reduce our net income. Certain of our employees have access to or signature authority with respect to bank accounts or other company assets, which could expose us to fraud or theft by such employees. In cases of fraud or theft by any such employee, we would incur losses, which may not be recoverable from the employee and which may not be fully covered by insurance.
We may not be successful in implementing and integrating strategic transactions or in divesting non-strategic assets, which could cause our financial results to fail to meet our forecasts.
From time to time, we may undertake strategic transactions that give us the opportunity to access new customers and new end-customer markets, to obtain new manufacturing and service capabilities and technologies, to enter new geographic manufacturing locations, to lower our manufacturing costs and improve the margins on our product mix, and to further develop existing customer relationships. Strategic transactions involve many difficulties and uncertainties, including the following:
| |
• | integrating acquired operations and businesses; |
| |
• | regulatory approvals or other conditions to closing that delay the completing of strategic transactions beyond the time anticipated; |
| |
• | allocating management resources; |
| |
• | scaling up production and coordinating management of operations at new sites; |
| |
• | separating operations or support infrastructure for entities divested; |
| |
• | managing and integrating operations in geographically dispersed locations; |
| |
• | maintaining customer, supplier or other favorable business relationships of acquired operations and terminating unfavorable relationships; |
| |
• | integrating the acquired company's systems into our management information systems; |
| |
• | satisfying unforeseen liabilities of acquired businesses, including environmental liabilities, which could require the expenditure of material amounts of cash; |
| |
• | operating in the geographic market or industry sector of the business acquired in which we may have little or no experience; |
| |
• | improving and expanding our management information systems to accommodate expanded operations; and |
| |
• | losing key employees of acquired operations. |
Any of these factors could prevent us from realizing the anticipated benefits of a strategic transaction, and our failure to realize these benefits could reduce our sales below and increase our costs above our forecasts. Acquisitions may also be dilutive to our earnings per share if our projections and assumptions about the acquired business' future operating results prove to be inaccurate. As a result, although our goal is to improve our business and maximize stockholder value, any transactions that we complete may ultimately fail to increase our sales and net income and stock price.
The impact of price fluctuations could reduce our net income
The cost of commodities, parts and components used in the manufacturing of our products has fluctuated significantly in the past. Should we not be successful in adjusting our pricing to account such fluctuations, our gross margins, and therefore net income, would decline.
Our key personnel are critical to the continued growth of our business and we cannot assure you that they will remain with us.
Our success depends upon the continued service of our executive officers and other key personnel. Generally, these employees are not bound by employment or non-competition agreements. We cannot assure you that we will retain our officers and key employees, particularly our highly skilled operations managers and engineers involved in the manufacture of existing products and development of new products and processes. The competition for these employees is intense. In addition, if one or more of our executive officers or key employees were to join a competitor or otherwise compete directly or indirectly with us or otherwise become unavailable to us, we could lose customers and our sales and gross margins could decrease.
If we are unable to protect our intellectual property or infringe, or are alleged to infringe, upon intellectual property of others, we could lose sales or be required to pay significant amounts in costs or damages.
We rely on a combination of copyright, patent, trademark and trade secret laws and restrictions on disclosure to protect our intellectual property rights. We cannot be certain that the steps we have taken will prevent unauthorized use of our technology. Any failure to protect our intellectual property rights would diminish or eliminate the competitive advantages that we derive from our proprietary technology. We rely in part upon patents to protect our intellectual property position. However, a number of our patents covering certain aspects of our manufacturing processes or products have expired or will expire in the near future. Such expirations reduce our ability to assert claims against competitors or others who use similar technology.
We may become involved in litigation in the future to protect our intellectual property or because others may allege that we infringe on their intellectual property. These claims and any resulting lawsuits could subject us to significant liability for damages and invalidate our proprietary rights. In addition, these lawsuits, regardless of their merits, likely would be time consuming and expensive to resolve and would divert management's time and attention. Any potential intellectual property litigation alleging our infringement of a third-party's intellectual property also could force us or our customers to:
| |
• | stop producing products that use the challenged intellectual property; |
| |
• | obtain from the owner of the infringed intellectual property, at our expense, a license to sell the relevant technology at an additional cost, which license may not be available on reasonable terms, or at all; or |
| |
• | redesign those products or services that use the infringed technology. |
Any costs we incur from having to take any of these actions could be substantial.
We may not have sufficient insurance coverage for certain of the risks and liabilities we assume in connection with the products and services we provide to our customers, which could leave us responsible for certain costs and damages incurred by our customers.
We carry various forms of business and liability insurance in amounts we believe are reasonable and customary for similarly situated companies in our industry. However, we do not have insurance coverage for all of the risks and liabilities we assume in connection with the products and services we provide to our customers, such as potential warranty, product liability, intellectual property infringement and product recall claims. As a result, such liability claims may not be covered under our insurance policies. Should we sustain a significant uncovered loss, our net income would be reduced.
Changes in financial accounting standards or policies have affected, and in the future may affect, our reported financial condition or results of operations. Additionally, changes in securities laws and regulations have increased, and are likely to continue to increase, our operating costs.
We prepare our consolidated financial statements in conformity with accounting principles generally accepted in the United States, or U.S. GAAP. Our preparation of financial statements in accordance with U.S. GAAP requires that we make estimates and assumptions that affect the recorded amounts of assets and liabilities, disclosure of those assets and liabilities at the date of the financial statements and the recorded amounts of expenses during the reporting period. A change in the facts and
circumstances surrounding those estimates could result in a change to our estimates and could impact our future operating results.
In addition, these principles are subject to interpretation by the Financial Accounting Standards Board (FASB), the SEC and various bodies formed to interpret and create appropriate accounting policies. A change in those policies can have a significant effect on our reported results and may affect our reporting of transactions which are completed before a change is announced. Accounting policies affecting many other aspects of our business, including rules relating to revenue recognition, off-balance sheet transactions, stock-based compensation, restructurings, acquisition accounting, asset disposals and asset retirement obligations, intangible assets, derivative and other financial instruments and in-process research and development charges, have recently been revised or are under review. Changes to those rules or the questioning of how we interpret or implement those rules may have a material adverse effect on our reported financial results or on the way we conduct business. For example, a preliminary timetable by which U.S. companies would adopt International Financial Reporting Standards has been promulgated by the SEC. Although at a very early stage of consideration by regulatory agencies, adoption of such standards could substantially change our reporting practices in a number of areas, including revenue recognition and recording of assets and liabilities.
Finally, corporate governance, public disclosure and compliance practices continue to evolve based upon continuing legislative action, SEC rulemaking and stockholder advisory group policies. As a result, the number of rules and regulations applicable to us may increase, which would also increase our legal and financial compliance costs and the amount of time management must devote to compliance activities. In turn, these developments could also make it more difficult for us to attract and retain qualified members of our board of directors, particularly to serve on our audit committee, and qualified executive officers in light of an increase in actual or perceived liability for serving in such positions.
Outages, computer viruses, break-ins and similar events could disrupt our operations.
We rely on information technology networks and systems, some of which are owned and operated by third parties, to process, transmit and store electronic information. In particular, we depend on our information technology infrastructure for a variety of functions, including worldwide financial reporting, inventory management, procurement, invoicing and email communications. Any of these systems may be susceptible to outages due to fire, floods, power loss, telecommunications failures, terrorist attacks and similar events. Despite the implementation of network security measures, our systems and those of third parties on which we rely may also be vulnerable to computer viruses, break-ins and similar disruptions. If we or our vendors are unable to prevent such outages and breaches, our operations could be disrupted.
We are subject to risks associated with natural disasters and global events.
We conduct a significant portion of our activities including manufacturing, administration and information technology management in areas that have experienced natural disasters, such as major earthquakes, hurricanes, and tsunamis. Our insurance coverage with respect to damages to our facilities or our customers' products caused by natural disasters is limited and is subject to deductibles and coverage limits. Such coverage may not be adequate or continue to be available at commercially reasonable rates and terms. In the event of a major earthquake or other disaster affecting one or more of our facilities, our operations and management information systems, which control our worldwide procurement, inventory management, shipping and billing activities, could be significantly disrupted. Such events could also delay or prevent product manufacturing and shipment for the time required to transfer production or repair, rebuild or replace the affected manufacturing facilities. This time frame could be lengthy and result in significant expenses for repair and related costs. While we have in place disaster recovery plans, there can be no assurance that such plans will be sufficient to allow our operations to continue in the event of every natural or man-made disaster, pandemic or other extraordinary event. Any extended inability to continue our operations at unaffected facilities following such an event would reduce our revenue and potentially damage our reputation as a reliable supplier.
Item 1B. Unresolved Staff Comments
None.
Item 2. Properties
Facilities. Our customers market numerous products throughout the world and therefore need to access manufacturing services on a global basis. To enhance our EMS offerings, we seek to locate our facilities either near our customers and our customers' end markets in major centers for the electronics industry or, when appropriate, in lower cost locations. Many of our plants located near customers and their end markets are focused primarily on final system assembly and test, while plants located in lower cost areas are engaged primarily in higher volume, less complex component and subsystem manufacturing and assembly.
We continue to evaluate our global manufacturing operations and restructure our facilities and operations to bring our manufacturing capacity in line with demand and our manufacturing strategy and to provide cost efficient services for our customers. Through this process, we have closed certain facilities not required to satisfy current demand levels. We provide extensive operations in lower cost locations including Latin America, Eastern Europe, China and Southeast Asia and we plan to expand our presence in these lower cost locations as appropriate to meet the needs of our customers.
As of October 2, 2010, the approximate square footage of our manufacturing facilities by country was as follows:
| | |
| Approximate Square Footage |
Brazil | 258,673 | |
Canada | 452,850 | |
China | 3,406,743 | |
Finland | 261,778 | |
Germany | 354,090 | |
Hong Kong | 29,682 | |
Hungary | 592,388 | |
India | 240,700 | |
Indonesia | 99,210 | |
Ireland | 110,000 | |
Israel | 301,275 | |
Malaysia | 531,826 | |
Mexico | 1,946,836 | |
Singapore | 607,413 | |
Sweden | 77,425 | |
Thailand | 326,293 | |
United Kingdom | 30,000 | |
United States | 2,917,951 | |
Total | 12,545,133 | |
In addition to the above, we have 201,881 square feet of logistics and other non-manufacturing space that we are currently using and also have 2,439,396 square feet of inactive facilities that are closed or in the process of being closed as of October 2, 2010, of which 1,441,648 square feet is for domestic locations and 997,748 square feet is for international locations. Moreover, 221,972 square feet of the inactive facilities is leased to third parties. We are currently undertaking an aggressive program to sublease or terminate leases for unused facilities and to sell owned properties that are no longer expected to serve our future needs.
As of October 2, 2010, our active manufacturing facilities consist of 8,283,583 square feet in facilities that we own, with the remaining 4,261,550 square feet in leased facilities under lease terms expiring between 2010 and 2036.
We regularly evaluate our expected future facilities requirements. Although we believe our existing facilities are adequate to meet our current requirements, we anticipate expanding several of our international facilities within the next 12 months in order to support projected business volumes in these locations.
Certifications and Registrations. Certifications and registrations under industry standards are important to our business because many customers rely on them to confirm our adherence to manufacturing process and quality standards.
Certain markets, such as telecommunications, medical, aviation, defense, aerospace and automotive, require adherence to industry-specific standards. Substantially all of our manufacturing facilities are registered under ISO 9001:2008, a standard published by the International Organization for Standardization. As part of the ISO 9001:2008 certification process, we have a highly developed quality management system and continually improve its effectiveness in accordance with its requirements. We use this registration to demonstrate our ability to consistently provide product that meets customer and applicable regulatory requirements and enhance customer satisfaction through its effective application. ISO 9001:2008 registration is of particular importance to our customers throughout the world.
In addition to ISO 9001:2008, most of our facilities are TL 9000 registered. The TL 9000 quality system requirements and quality system metrics are designed specifically for the telecommunications industry to promote consistency and efficiency, reduce redundancy and improve customer satisfaction. Included in the TL 9000 system are performance-based metrics that quantify reliability and quality performance of the product. The majority of our facilities are also Underwriters Laboratories (UL) compliant. These standards define requirements for quality, manufacturing process control and manufacturing documentation and are required by many OEMs in the communications sector of the electronics industry.
Our medical products division has identified certain manufacturing facilities to be centers of excellence for medical products manufacturing. These facilities are FDA and ISO 13485:2003 registered and fully compliant to the FDA's quality systems regulations.
Our defense and aerospace operations are headquartered in Huntsville, Alabama and are housed in a facility dedicated to meeting the specialized needs of our defense and aerospace customers. This Defense and Aerospace operation, as well as other selected operations around the world, are AS9100 registered. The Defense and Aerospace operation is also certified under various U.S. military specifications as well as under ANSI and other standards appropriate for defense and aerospace suppliers.
Our automotive facilities are strategically located worldwide. Substantially all of our automotive facilities are certified to ISO/TS 16949:2009, the automotive industry standard.
Item 3. Legal Proceedings
Non-US Proceedings
In November 2006 and December 2007, a non-US governmental entity made certain claims for penalties against us asserting that we did not comply with bookkeeping rules in accordance with applicable tax regulations. We have provided documents that we believe demonstrate our compliance with these tax regulations. We have appealed the penalties in administrative court, and have not paid the penalties pending review by the court. The administrative court has not indicated when it will issue a decision. We believe we have a meritorious position in this matter and are contesting this claim vigorously.
See also Note 8 of Notes to Consolidated Financial Statements.
Other Proceedings
From time to time, we may be involved in other routine legal proceedings, as well as demands, claims and threatened litigation, that arise in the normal course of our business. The ultimate outcome of any litigation is uncertain and unfavorable outcomes could have a negative impact on our results of operations and financial condition. Regardless of outcome, litigation can have an adverse impact on us as a result of incurrence of defense costs, diversion of management resources and other factors. We record liabilities for legal proceedings when a loss becomes probable and the amount of loss can be reasonably estimated.
Item 4. (Removed and Reserved)
PART II
Item 5. Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.
Market Information
Our common stock is traded on the Nasdaq Global Select Market under the symbol SANM. The following table lists the high and low intra-day prices for our common stock as reported on NASDAQ.
| | | | | | | | |
2010 | | High | | Low |
First quarter | | $ | 11.43 | | | $ | 6.12 | |
Second quarter | | $ | 18.15 | | | $ | 11.00 | |
Third quarter | | $ | 20.30 | | | $ | 12.53 | |
Fourth quarter | | $ | 16.38 | | | $ | 8.92 | |
| | | | | | | | |
2009 | | High | | Low |
First quarter | | $ | 9.06 | | | $ | 1.62 | |
Second quarter | | $ | 3.17 | | | $ | 1.08 | |
Third quarter | | $ | 4.32 | | | $ | 1.80 | |
Fourth quarter | | $ | 9.06 | | | $ | 2.16 | |
As of November 15, 2010, we had approximately 1,769 holders of record of our common stock. On November 15, 2010, the last reported sales price of our common stock on the Nasdaq Global Select Market was $11.23 per share.
The following graph compares the cumulative 5-year total return provided shareholders on our common stock relative to the cumulative total returns of the S&P 500 index and the Nasdaq Electronic Components index. An investment of $100 (with reinvestment of all dividends) is assumed to have been made in our common stock and in each of the indexes on September 30, 2005 and its relative performance is tracked through October 2, 2010.
| | | | | | | | | | | | | | | | | | |
| | 9/30/2005 | | 9/30/2006 | | 9/30/2007 | | 9/27/2008 | | 10/3/2009 | | 10/2/2010 |
Sanmina-SCI Corporation | | 100.00 | | | 87.18 | | | 49.42 | | | 38.23 | | | 31.78 | | | 46.66 | |
S&P 500 | | 100.00 | | | 110.79 | | | 129.01 | | | 100.66 | | | 93.70 | | | 103.22 | |
NASDAQ Electronic Components | | 100.00 | | | 95.01 | | | 114.47 | | | 80.09 | | | 86.57 | | | 91.20 | |
The stock price performance included in this graph is not necessarily indicative of future stock price performance.
Dividends
We have never declared or paid cash dividends on our common stock. We currently expect to retain future earnings for use in the operation and expansion of our business and do not anticipate paying cash dividends in the foreseeable future. Additionally, our ability to pay dividends is limited pursuant to covenants contained in our various debt agreements. See also
“Item 7-Management's Discussion and Analysis of Financial Condition and Results of Operations-Liquidity and Capital Resources.”
Item 6. Selected Financial Data
The following selected financial data should be read in conjunction with “Item 7-Management's Discussion and Analysis of Financial Condition and Results of Operations” and “Item 8-Financial Statements and Supplementary Data,” included elsewhere in this Form 10-K.
FIVE YEAR SELECTED FINANCIAL HIGHLIGHTS
Consolidated Statements of Operations Data:
| | | | | | | | | | | | | | | | | | | |
| Year Ended |
| 2010 | | 2009 | | 2008 | | 2007 | | 2006 |
| (In thousands, except per share data) |
Net sales | $ | 6,318,691 | | | $ | 5,177,481 | | | $ | 7,202,403 | | | $ | 7,137,793 | | | $ | 7,645,118 | |
Operating income (loss) | $ | 204,799 | | | $ | (4,656 | ) | | $ | (384,160 | ) | | $ | (1,023,061 | ) | | $ | 28,537 | |
| | | | | | | | | | | | | | |
Income (loss) from continuing operations before income taxes and cumulative effect of accounting changes | $ | 139,242 | | | $ | (112,570 | ) | | $ | (490,331 | ) | | $ | (1,142,027 | ) | | $ | (174,933 | ) |
Provision for (benefit from) income taxes | 16,807 | | | 25,252 | | | 22,605 | | | 1,066 | | | (9,038 | ) |
Cumulative effect of accounting changes, net of tax | — | | | — | | | — | | | — | | | 2,830 | |
Income (loss) from continuing operations | $ | 122,435 | | | $ | (137,822 | ) | | $ | (512,936 | ) | | $ | (1,143,093 | ) | | $ | (163,065 | ) |
Income from discontinued operations, net of tax | — | | | — | | | 24,987 | | | 6,836 | | | 19,908 | |
Net income (loss) | $ | 122,435 | | | $ | (137,822 | ) | | $ | (487,949 | ) | | $ | (1,136,257 | ) | | $ | (143,157 | ) |
Basic earnings (loss) per share: | | | | | | | | | | | | | | |
Continuing operations | $ | 1.55 | | | $ | (1.67 | ) | | $ | (5.80 | ) | | $ | (13.01 | ) | | $ | (1.86 | ) |
Discontinued operations | $ | — | | | $ | — | | | $ | 0.28 | | | $ | 0.08 | | | $ | 0.23 | |
Net income (loss) | $ | 1.55 | | | $ | (1.67 | ) | | $ | (5.52 | ) | | $ | (12.93 | ) | | $ | (1.63 | ) |
Diluted earnings (loss) per share | | | | | | | | | |
Continuing operations | $ | 1.48 | | | $ | (1.67 | ) | | $ | (5.80 | ) | | $ | (13.01 | ) | | $ | (1.86 | ) |
Discontinued operations | $ | — | | | $ | — | | | $ | 0.28 | | | $ | 0.08 | | | $ | 0.23 | |
Net income (loss) | $ | 1.48 | | | $ | (1.67 | ) | | $ | (5.52 | ) | | $ | (12.93 | ) | | $ | (1.63 | ) |
Shares used in computing per share amounts | | | | | | | | | |
Basic | 79,195 | | | 82,528 | | | 88,454 | | | 87,853 | | | 87,661 | |
Diluted | 82,477 | | | 82,528 | | | 88,454 | | | 87,853 | | | 87,661 | |
Consolidated Balance Sheet Data:
| | | | | | | | | | | | | | | | | | | |
| Year Ended |
| 2010 | | 2009 | | 2008 | | 2007 | | 2006 |
| (In thousands) |
Cash and cash equivalents | $ | 592,812 | | | $ | 899,151 | | | $ | 869,801 | | | $ | 933,424 | | | $ | 491,829 | |
Net working capital | $ | 1,338,666 | | | $ | 1,280,136 | | | $ | 1,574,339 | | | $ | 1,618,375 | | | $ | 1,516,754 | |
Total assets | $ | 3,301,796 | | | $ | 3,123,897 | | | $ | 3,530,727 | | | $ | 4,669,955 | | | $ | 5,862,430 | |
Long-term debt (excluding current portion) | $ | 1,240,666 | | | $ | 1,262,014 | | | $ | 1,481,985 | | | $ | 1,588,072 | | | $ | 1,507,112 | |
Stockholders' equity | $ | 661,601 | | | $ | 519,070 | | | $ | 673,488 | | | $ | 1,152,277 | | | $ | 2,251,293 | |
Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations
This report contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. These statements relate to our expectations for future events and time periods. All statements other than statements of historical fact are statements that could be deemed to be forward-looking statements, including any statements regarding the expected amounts of future restructuring charges, future expansion plans, trends in future sales or results of operations, gross margin or operating margin, expenses, earnings or losses from operations, cash flow, inventory turns, synergies or other financial items; any statements of the plans, strategies and objectives of management for future operations; any statements concerning developments, performance or industry ranking; any statements regarding future economic conditions or performance; any statements regarding pending investigations, claims or disputes; any statements of expectation or belief; and any statements of assumptions underlying any of the foregoing. Generally, the words “anticipate,” “believe,” “plan,” “expect,” “future,” “intend,” “may,” “will,” “should,” “estimate,” “predict,” “potential,” “continue” and similar expressions identify forward-looking statements. Our forward-looking statements are based on current expectations, forecasts and assumptions and are subject to risks, uncertainties and changes in condition, significance, value and effect. As a result of the factors described herein, and in the documents incorporated herein by reference, including, in particular, those factors described under “Item1A. Risk Factors Affecting Operating Results” we undertake no obligation to publicly disclose any revisions to these forward-looking statements to reflect events or circumstances occurring subsequent to filing this report with the Securities and Exchange Commission.
Overview
We are a leading independent global provider of customized, integrated electronics manufacturing services, or EMS. Our revenue is generated from sales of our services primarily to original equipment manufacturers, or OEMs, in the communications; industrial, defense and medical; enterprise computing and storage; and multimedia markets.
In late 2008, the business environment became challenging due to adverse global economic conditions. These conditions slowed global economic growth and resulted in recessions in many locations, including the U.S., Europe and certain countries in Asia. These conditions materially and adversely impacted our financial condition and results of operations for 2009. Global economic conditions improved throughout 2010, resulting in a substantial increase in our business volume. As a result of this increase in business volume and the realization of benefits from our previous restructuring actions, our net sales and gross profit increased significantly during 2010 and we had our first profitable year since 2001. We have experienced fluctuations in our results of operations in the past and may continue to experience such fluctuations in the future.
During 2008, we sold our personal computing and associated logistics business (“PC Business”) and have reflected the PC Business as discontinued operations in the consolidated financial statements. All references in this section to our operating results pertain only to our continuing operations and all references to years refer to our fiscal years ending on the last Saturday of each year closest to September 30th. Fiscal 2010 and 2008 are each 52 weeks and 2009 was 53 weeks, with the additional week included in the fourth quarter. The additional week in 2009 did not significantly affect our results of operations.
A relatively small number of customers have historically generated a significant portion of our net sales. Sales to our ten largest customers represented 49.9% , 48.0% and 48.2% of our net sales for 2010, 2009, and 2008, respectively. For 2010, one customer accounted for approximately 11% of our net sales. For 2009 and 2008, no customer represented 10% or more of our net sales.
We typically generate a significant portion of our net sales from international operations. Net sales generated from non-U.S. operations were 79.0%, 76.9%, and 73.1% of our net sales for 2010, 2009 and 2008, respectively. The concentration of international operations has resulted primarily from a desire on the part of many of our customers to move production to lower cost locations in regions such as Asia, Latin America and Eastern Europe. We expect this trend to continue.
Historically, we have had substantial recurring sales from existing customers. We typically enter into supply agreements with our major OEM customers. These agreements generally have terms ranging from three to five years and cover the manufacture of a range of products. Under these agreements, a customer typically agrees to purchase its requirements for specific products in particular geographic areas from us. These agreements generally do not obligate the customer to purchase minimum quantities of products. In some circumstances, our supply agreements with customers provide for cost reduction objectives during the term of the agreement.
Critical Accounting Policies and Estimates
Management's discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements which have been prepared in accordance with accounting principles generally accepted in the United States. We review the accounting policies used in reporting our financial results on a regular basis. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, net sales and expenses and related disclosure of contingent assets and liabilities. On an ongoing basis, we evaluate the process used to develop estimates for certain reserves and contingent liabilities, including those related to product returns, accounts receivable, inventories, intangible assets, income taxes, warranty obligations, environmental matters, restructuring, and contingencies and litigation. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Our actual results may differ materially from these estimates.
We believe the following critical accounting policies reflect the more significant judgments and estimates used by us in preparing our consolidated financial statements:
Accounts Receivable and Other Related Allowances— We estimate uncollectible accounts, product returns and other adjustments related to current period net sales to establish related allowances. In making these estimates, we analyze the creditworthiness of our customers, past experience, changes in customer demand, and the overall economic climate in the industries we serve. If actual uncollectible accounts, product returns or other adjustments differ significantly from our estimates, the amount of sales or operating expenses we report would be affected. One of our most significant credit risks is the ultimate realization of our accounts receivable. This risk is mitigated by (i) a significant portion of sales to well-established companies, (ii) ongoing credit evaluation of our customers, (iii) frequent contact with our customers, especially our most significant customers, which enables us to monitor changes in their business operations and to respond accordingly and (iv) obtaining in certain cases a guaranty of the amounts payable by the customer from its parent entity. To establish our allowance for doubtful accounts, we evaluate credit risk related to specific customers based on the current economic environment; however, we are not able to predict the inability of our customers to meet their financial obligations to us. We believe the allowances we have established are adequate under the circumstances; however, a change in the economic environment or a customer's financial condition could cause our estimates of allowances, and consequently the provision for doubtful accounts, to change, which could have a significant adverse impact on our financial position and/or results of operations. To establish the allowance for product returns and other adjustments, we primarily utilize data regarding historical adjustments.
Inventories— We state inventories at the lower of cost (first-in, first-out method) or market value. Cost includes raw materials, and labor and manufacturing overhead incurred for finished goods and work-in-process. We regularly evaluate the carrying value of our inventories. Provisions are made to reduce excess and obsolete inventories to their estimated net realizable values. The ultimate realization of inventory carrying amounts is affected by changes in customer demand for inventory that customers are not contractually obligated to purchase and inventory held for specific customers who are experiencing financial difficulties. Inventory writedowns are recorded based on forecasted demand, past experience with specific customers, the ability to redistribute inventory to other programs or back to our suppliers, and whether customers are contractually obligated and have the ability to pay for the related inventory. Prepayments received from customers for inventories that have not been shipped to customers or otherwise disposed of are netted against inventory.
We procure inventory based on specific customer orders and forecasts. Customers have limited rights of modification (for example, cancellations) with respect to these orders. Customer modifications to orders affecting inventory previously procured by us and our purchases of inventory beyond customer needs may result in excess and obsolete inventory for the related customers. Although we may be able to use some excess components and raw materials for other products we manufacture, a portion of the cost of this excess inventory may not be returned to the vendors or recovered from customers. Write-offs or write-downs of inventory could relate to:
| |
• | declines in the market value of inventory; |
| |
• | inventory held for specific customers who are experiencing financial difficulty; and |
| |
• | changes in customer demand for inventory, such as cancellation of orders, and our purchases of inventory beyond customer needs that result in excess quantities on hand that we are not able to return to the vendor, use to fulfill orders from other customers or charge back to the customer. |
Our practice is to dispose of excess and obsolete inventory as soon as practicable after such inventory has been identified as having no value to us.
Tangible and Other Definite-lived Intangible Assets—We review long-lived tangible and other definite-lived
intangible assets for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset or asset group may not be recoverable. An asset is considered impaired if its carrying amount exceeds the undiscounted future net cash flows the asset is expected to generate. If an asset or asset group is considered impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the asset exceeds its fair value. For asset groups for which a building is the primary asset, we estimate fair value primarily based on data provided by commercial real estate brokers. For other assets, we estimate fair value based on projected discounted future net cash flows using a credit adjusted discount rate. Management applies significant judgment in estimating future cash flows.
Income Taxes— We estimate our income tax provision or benefit in each of the jurisdictions in which we operate, including estimating exposures related to examinations by taxing authorities. We believe our accruals for tax liabilities are adequate for all open years, based on our assessment of many factors including past experience and interpretations of tax law applied to the facts of each matter. Although we believe our accruals for tax liabilities are adequate, tax regulations are subject to interpretation and the tax controversy process is inherently lengthy and uncertain; therefore, our assessments can involve a series of complex judgments about future events and rely heavily on estimates and assumptions. To the extent the probable tax outcome of these matters changes, such changes in estimates will impact our income tax provision in the period in which such determination is made.
We must also make judgments regarding the realizability of deferred tax assets. The carrying value of our net deferred tax assets is based on our belief that it is more likely than not that we will generate sufficient future taxable income in certain jurisdictions to realize these deferred tax assets. A valuation allowance is established for deferred tax assets when we believe realization of such assets is not more likely than not. Our judgments regarding future taxable income may change due to changes in market conditions, new or modified tax laws, tax planning strategies or other factors. If our assumptions, and consequently our estimates, change in the future, the valuation allowances we have established may be increased or decreased, resulting in a respective increase or decrease in income tax expense. Our effective tax rate is highly dependent upon the amount and geographic distribution of our worldwide earnings or losses, the tax regulations and tax holidays in each geographic region, the utilization of net operating losses, the availability of tax credits and carryforwards, and the effectiveness of our tax planning strategies.
We only recognize or continue to recognize tax positions that meet a “more likely than not” threshold of being upheld. We recognize interest and penalties related to unrecognized tax benefits as a component of income tax expense.
Results of Operations
Years Ended October 2, 2010, October 3, 2009 and September 27, 2008.
The following table presents our key operating results.
| | | | | | | | | | | |
| Year Ended |
| October 2, 2010 | | October 3, 2009 | | September 27, 2008 |
| (In thousands) |
Net sales | $ | 6,318,691 | | | $ | 5,177,481 | | | $ | 7,202,403 | |
Gross profit | $ | 482,990 | | | $ | 322,478 | | | $ | 524,106 | |
Operating income (loss) | $ | 204,799 | | | $ | (4,656 | ) | | $ | (384,160 | ) |
Income (loss) from continuing operations | $ | 122,435 | | | $ | (137,822 | ) | | $ | (512,936 | ) |
Income from discontinued operations, net of tax | $ | — | | | $ | — | | | $ | 24,987 | |
Net income (loss) | $ | 122,435 | | | $ | (137,822 | ) | | $ | (487,949 | ) |
The following table presents certain statements of operations data expressed as a percentage of net sales.
| | | | | | | | |
| Year Ended |
| October 2, 2010 | | October 3, 2009 | | September 27, 2008 |
Net sales | 100.0 | | | 100.0 | | | 100.0 | |
Cost of sales | 92.4 | | | 93.8 | | | 92.7 | |
Gross margin | 7.6 | | | 6.2 | | | 7.3 | |
Operating expenses: | | | | | | | | |
Selling, general and administrative | 4.0 | | | 4.6 | | | 4.4 | |
Research and development | 0.2 | | | 0.3 | | | 0.3 | |
Other | 0.2 | | | 1.4 | | | 7.9 | |
Total operating expenses | 4.4 | | | 6.3 | | | 12.6 | |
Net Sales
Net sales for 2010 increased $1.1 billion, or 22.0%, from $5.2 billion for 2009 to $6.3 billion for 2010. The increase was primarily the result of improved demand from customers under existing programs and new program wins. Sales increased $468.5 million in our communications end market, $280.2 million in our industrial, defense and medical end market, $224.4 million in our multimedia end market and $168.1 million in our enterprise computing and storage end market.
Net sales for 2009 decreased $2.0 billion, or 28.1%, from $7.2 billion for 2008 to $5.2 billion for 2009. The decrease was primarily the result of a weak global economy, which reduced demand across all of our end markets. Sales decreased $834.5 million in our communications end market, $466.7 million in our high-end computing end market, $390.9 million in our multimedia end market and $332.8 million in our industrial, defense and medical end market.
Gross Margin
Gross margin was 7.6%, 6.2% and 7.3% in 2010, 2009 and 2008, respectively. The increase from 2009 to 2010 was primarily a result of the profit contribution from increased business volume and the effect of cost reduction initiatives implemented in 2010 and in prior periods. The decrease from 2008 to 2009 was primarily a result of significantly lower business volume in 2009, partially offset by improvements resulting from various cost reduction initiatives that lowered our cost base.
We have experienced fluctuations in gross margin in the past and may continue to do so in the future. Fluctuations in our gross margins may be caused by a number of factors, including:
| |
• | Greater competition in the EMS industry and pricing pressures from OEMs due to greater focus on cost reduction; |
| |
• | Changes in the overall volume of our business; |
| |
• | Changes in the mix of high and low margin products demanded by our customers; |
| |
• | Changes in customer demand and sales volumes for our vertically integrated system components and subassemblies; |
| |
• | Provisions for excess and obsolete inventory; |
| |
• | Level of operational efficiency; |
| |
• | Pricing pressure on electronic components resulting from economic conditions in the electronics industry, with EMS companies competing more aggressively on cost to obtain new or maintain existing business; and |
| |
• | Our ability to transition manufacturing and assembly operations to lower cost regions in an efficient manner. |
Selling, General and Administrative
Selling, general and administrative expenses were $252.5 million, $238.2 million and $317.0 million in 2010, 2009 and 2008, respectively. As a percentage of net sales, selling, general and administrative expenses were 4.0% for 2010, 4.6% for 2009, and 4.4% for 2008. The increase in absolute dollars from 2009 to 2010 was primarily attributable to higher incentive compensation related to improvements in our financial performance and increased bad debt expense, partially offset by cost reductions across a number of departments and lower professional services fees. The decrease in 2010 as a percentage of net sales was primarily attributable to higher net sales for 2010.
The decrease in absolute dollars from 2008 to 2009 was primarily attributable to company-wide cost reduction initiatives, approximately 80% of which were related to reductions in staffing related costs. The slight increase in 2009 as a percentage of sales was primarily attributable to lower net sales for 2009.
Research and Development
Research and development expenses were $13.0 million, $16.7 million and $19.5 million in 2010, 2009 and 2008, respectively. As a percentage of net sales, research and development expenses were 0.2% for 2010 and 0.3% for 2009 and 2008. The decrease in absolute dollars from 2009 to 2010 was primarily the result of reduced spending due to the completion of certain projects in 2009. The decrease in absolute dollars from 2008 to 2009 was the result of reductions in staffing related costs as we focused on joint development activities.
Restructuring
Restructuring costs related to employee severance are recorded when probable and estimable based on our policy with respect to severance payments. For restructuring costs other than employee severance, a liability is recognized only when incurred.
2010 Restructuring Plan
We initiated a new restructuring plan in 2010 as a result of our acquisition of BreconRidge Corporation during the year (refer to Note 3 of the Notes to Consolidated Financial Statements). Pursuant to this plan, we expect to incur costs in the range of $13 million to $15 million to consolidate certain facilities and eliminate redundant employees. We anticipate implementing all actions under this plan within the next year. In connection with actions taken to date under this plan, we have recorded restructuring charges of $4.4 million for severance and related benefits for approximately 650 terminated employees, which represents substantially all employees to be terminated under this plan. During 2010, we initiated the closure or consolidation of six facilities under this plan.
Below is a summary of restructuring costs associated with this plan:
| | | | | | | | | | | | |
| Employee Termination / Severance and Related Benefits Cash | | Leases and Facility Shutdown and Consolidation Costs Cash | | | Total |
| (In thousands) |
Balance at October 3, 2009 | $ | — | | | $ | — | | | | $ | — | |
Charges to operations | 4,447 | | | 506 | | | | 4,953 | |
Charges utilized | (2,485 | ) | | (42 | ) | | | (2,527 | ) |
Balance at October 2, 2010 | $ | 1,962 | | | $ | 464 | | | | $ | 2,426 | |
Restructuring Plans - 2009 and Prior
Due to substantial completion of all actions under restructuring plans initiated prior to 2010 and the immateriality of the remaining accrual balance related to such plans, all such plans have been combined for disclosure purposes. Remaining actions under these plans relate to leases and facility shutdowns.
Below is a summary of restructuring costs associated with facility closures and other consolidation efforts that were implemented in or prior to 2009:
| | | | | | | | | | | | | | | |
| Employee Termination / Severance and Related Benefits Cash | | Leases and Facility Shutdown and Consolidation Costs Cash | | Impairment of Assets or Redundant Assets Non-Cash | | Total |
| (In thousands) |
Balance at September 29, 2007 | $ | 6,140 | | | $ | 8,426 | | | $ | — | | | $ | 14,566 | |
Charges to operations | 64,126 | | | 16,519 | | | 2,456 | | | 83,101 | |
Charges utilized | (45,248 | ) | | (19,765 | ) | | (2,456 | ) | | (67,469 | ) |
Reversal of accrual | (833 | ) | | (892 | ) | | — | | | (1,725 | ) |
Balance at September 27, 2008 | $ | 24,185 | | | $ | 4,288 | | | $ | — | | | $ | 28,473 | |
Charges to operations | $ | 37,693 | | | $ | 19,587 | | | $ | 4,892 | | | $ | 62,172 | |
Charges utilized | (46,398 | ) | | (20,043 | ) | | (4,892 | ) | | (71,333 | ) |
Reversal of accrual | (4,725 | ) | | (187 | ) | | — | | | (4,912 | ) |
Balance at October 3, 2009 | $ | 10,755 | | | $ | 3,645 | | | $ | — | | | $ | 14,400 | |
Charges to operations | $ | 3,426 | | | $ | 12,781 | | | $ | 3,033 | | | $ | 19,240 | |
Charges utilized | (8,619 | ) | | (15,511 | ) | | (3,033 | ) | | (27,163 | ) |
Reversal of accrual | (2,094 | ) | | (277 | ) | | — | | | (2,371 | ) |
Balance at October 2, 2010 | $ | 3,468 | | | $ | 638 | | | $ | — | | | $ | 4,106 | |
During 2010, we recorded restructuring charges for severance and related benefits for approximately 300 terminated employees. During 2009, we closed or consolidated six facilities and recorded restructuring charges for severance and related benefits for approximately 5,400 terminated employees. During 2008, we closed or consolidated four facilities and terminated approximately 2,900 employees.
Restructuring Plans - All Years
Accrued restructuring costs as of October 2, 2010 were $6.5 million. In connection with restructuring actions we have already implemented under our restructuring plan, we expect to pay remaining facilities related restructuring liabilities of $1.1 million through 2015 and the majority of accrued severance costs of $5.4 million through 2011.
The recognition of restructuring charges requires us to make judgments and estimates regarding the nature, timing and amount of costs associated with planned exit activities, including estimating sublease income and the fair values, less selling
costs, of property, plant and equipment to be disposed of. Our estimates of future liabilities may change, requiring us to record additional restructuring charges or reduce the amount of liabilities already recorded.
Amortization of Intangible Assets
During 2010, 2009 and 2008, we recorded amortization of intangible assets of $3.6 million, $4.8 million and $6.6 million, respectively. Intangible assets consist primarily of intellectual property, customer relationships and order backlog obtained through acquisitions. The decrease in amortization expense of $1.2 million from 2009 to 2010 is due to certain intangible assets from previous acquisitions being fully amortized, partially offset by $1.2 million of amortization expense from intangible assets recorded in conjunction with business acquisitions during 2010. The decrease of $1.8 million from 2008 to 2009 is due to certain intangible assets becoming fully amortized in 2008.
Impairment of Goodwill and Tangible Assets
During 2010 and 2009, we recorded asset impairment charges of $1.1 million and $10.2 million, respectively, related to a decline in the fair value of certain properties that were previously restructured and certain assets held for sale.
During 2008, we recorded a goodwill impairment charge of $478.7 million due to the expected effect of deteriorating general economic conditions on our future cash flows, the illiquidity of the credit markets and the decline in the stock market generally, and in our stock price in particular. We also recorded impairment charges of $5.0 million, primarily related to decreases in the fair value of certain assets held for sale.
Gains on Sales of Long-lived Assets
During 2010, we recognized $13.8 million of gains from sales of buildings that had been classified as assets held-for-sale on our consolidated balance sheet.
Interest Income and Expense
Interest income was $2.2 million, $6.5 million and $19.7 million in 2010, 2009 and 2008, respectively. The decrease from 2009 to 2010 was due to lower interest rates and lower average cash and cash equivalents balances in 2010. The decrease from 2008 to 2009 was primarily attributable to lower interest rates on invested cash in 2009, partially offset by a higher average cash balance in 2009.
Interest expense was $108.1 million, $117.0 million and $127.2 million in 2010, 2009 and 2008, respectively. The decrease from 2009 to 2010 was due primarily to a reduction of interest expense due to debt repayments of $219.9 million in 2010, partially offset by interest expense associated with short-term borrowings of $65.0 million in 2010. The decrease from 2008 to 2009 was primarily due to a significant reduction in interest rates during 2009, which reduced interest expense on our variable rate debt. In addition, our average debt balance was lower in 2009 due to repayment of $46.9 million of debt during the year.
Other Income (Expense), net
Other income (expense), net was $41.5 million, $(6.0) million and $3.6 million in 2010, 2009 and 2008, respectively. The following table summarizes the major components of other income (expense), net (in thousands):
| | | | | | | | | | | |
| Year ended |
| October 2, 2010 | | October 3, 2009 | | September 27, 2008 |
Foreign exchange gains (losses) | $ | (2,490 | ) | | $ | (8,498 | ) | | $ | 3,487 | |
Interest rate swaps not designated as hedging instruments | — | | | 5,694 | | | — | |
Gain (loss) from investments | 3,680 | | | 695 | | | (508 | ) |
Impairment of long-term investments | — | | | (4,531 | ) | | — | |
Litigation settlement | 35,556 | | | — | | | — | |
Other, net | 4,792 | | | 670 | | | 574 | |
Total | $ | 41,538 | | | $ | (5,970 | ) | | $ | 3,553 | |
We reduce our exposure to currency fluctuations through the use of foreign currency hedging instruments; however, hedges are established based on forecasts of foreign currency transactions. To the extent actual amounts differ from forecasted amounts, we will have exposure to currency fluctuations, resulting in foreign exchange gains or losses.
In 2009, we discontinued hedge accounting for certain of our interest rate swaps upon termination of one of the four outstanding swaps. The remaining three swaps were terminated in the following quarter. From the date hedge accounting was discontinued until the date the remaining three swaps were terminated, changes in the fair value of the swaps resulted in recognition of a $5.7 million gain.
Gain (Loss) on Extinguishment of Debt
During 2010, we repurchased or fully redeemed $195.7 million of the debt prior to maturity. In connection with these transactions, we recorded a loss of $1.2 million, consisting primarily of unamortized debt issuance costs. During 2009, we repurchased $46.9 million of debt at a discount to par value. In connection with these repurchases, we recorded a gain of $8.5 million, net of unamortized debt issuance costs of $0.8 million that were expensed upon repurchase of the debt and a $6.1 million charge associated with dedesignation of a related interest rate swap. During 2008, we redeemed $120 million debt at par. In connection with this redemption, $2.2 million of unamortized debt issuance costs were expensed.
Provision for Income Taxes
Our income tax expense was $16.8 million, $25.3 million and $22.6 million for 2010, 2009 and 2008, respectively. The effective tax rate for 2010 was 12.1%. The effective tax rates for 2009 and 2008 were not meaningful since we incurred a loss from continuing operations before income taxes in those years.
The reduction in income tax expense in 2010 from 2009 was due primarily to the favorable resolution of an uncertain foreign tax position in 2010 and the utilization of net operating loss carryforwards in the U.S. and certain foreign jurisdictions, partially offset by greater profits overall.
Liquidity and Capital Resources
| | | | | | | | | | | |
| Year Ended |
| October 2, 2010 | | October 3, 2009 | | September 27, 2008 |
| | | (In thousands) | | |
Net cash provided by (used in): | | | | | |
Operating activities | $ | (78,334 | ) | | $ | 197,230 | | | $ | 39,265 | |
Investing activities | (64,295 | ) | | (91,916 | ) | | 11,383 | |
Financing activities | (162,613 | ) | | (79,795 | ) | | (120,000 | ) |
Effect of exchange rate changes | (1,097 | ) | | 3,831 | | | 5,729 | |
Increase (decrease) in cash and cash equivalents | $ | (306,339 | ) | | $ | 29,350 | | | $ | (63,623 | ) |
Key working capital management measures
| | | |
| As of |
| October 2, 2010 | | October 3, 2009 |
Days sales outstanding(1) | 52 | | 48 |
Inventory turns(2) | 7.3 | | 6.1 |
Accounts payable days(3) | 55 | | 60 |
Cash cycle days(4) | 47 | | 46 |
| |
(1) | Days sales outstanding, or DSO, is calculated as the ratio of average accounts receivable, net, during the most recent quarter to average daily net sales for the quarter. |
| |
(2) | Inventory turns (annualized) are calculated as the ratio of four times our cost of sales for the most recent quarter to average inventory during the most recent quarter. |
| |
(3) | Accounts payable days is calculated as the ratio of 365 days divided by accounts payable turns, in which accounts payable turns is calculated as the ratio of four times our cost of sales for the most recent quarter to average accounts payable during the most recent quarter. |
| |
(4) | Cash cycle days is calculated as the ratio of 365 days to inventory turns, plus days sales outstanding minus accounts payable days. |
If necessary, calculations as of October 3, 2009 have been adjusted to reflect inclusion of an additional week in the period ended October 3, 2009.
Cash and cash equivalents were $592.8 million at October 2, 2010 and $899.2 million at October 3, 2009. Our cash levels vary during any given period depending on the timing of collections from customers and payments to suppliers, the extent and timing of sales of receivables and other factors. Working capital was $1.3 billion at October 2, 2010 and October 3, 2009.
Net cash provided by (used in) operating activities was $(78.3) million, $197.2 million and $39.3 million for 2010, 2009 and 2008, respectively. Cash flows from operating activities consists of: 1) net income (loss) adjusted to exclude non-cash items such as depreciation and amortization, stock-based compensation expense, etc., and 2) changes in net operating assets, which are comprised of accounts receivable, inventories, prepaid expenses and other assets, accounts payable, accrued liabilities and other long-term liabilities.
In 2010, we generated $220.9 million of cash from net income, excluding non-cash items, and we utilized $299.2 million of cash primarily due to an increase in our net operating assets to support growth in our business, as evidenced by a 22% increase in net sales. Although we utilized cash by increasing our net operating assets, we were able to improve our working capital metrics for inventory. In absolute dollars, inventory increased $83 million, but our inventory turns increased to 7.3 turns as of October 2, 2010 from 6.1 turns as of October 3, 2009 as we were better able to balance inventory levels with revenue levels. Partially offsetting the positive change in working capital metrics for inventory was our days sales outstanding (“DSO”) (a measure of how quickly we collect our accounts receivable). DSO increased to 52 days as of October 2, 2010 from 48 days as of October 3, 2009, due primarily to a change in the linearity of our net sales and no sales of accounts receivable at the end of 2010 compared to $30.4 million of sales of accounts receivable at the end of 2009. Additionally, our accounts payable days (a measure of how quickly we pay our suppliers), decreased to 55 days for 2010, from 60 days for 2009, due primarily to a change in the linearity of our material purchases.
In 2009, we generated $220.4 million of cash from net working capital changes, which consisted primarily of accounts receivable, inventories, accounts payable and accrued liabilities. This was reduced by a usage of $23.1 million of cash from our operating results, adjusted to exclude non-cash items. Cash generated from changes in net working capital reflects our focused efforts to reduce the level of net operating assets required to fund our operations and decreased business volumes. In 2008, we generated $119.8 million of cash from our operating results, adjusted to exclude non-cash items. This source of cash was reduced by net working capital changes of $80.5 million resulting primarily from the divestiture of our PC Business.
Net cash provided by (used in) investing activities was $(64.3) million, $(91.9) million and $11.4 million for 2010, 2009 and 2008, respectively. In 2010, we used $81.4 million of cash for capital expenditures, received proceeds of $30.8 million from asset sales and used $14.9 million in connection with business combinations (refer to Note 3 of the notes to our consolidated financial statements). In 2009, we used $65.9 million of cash for capital expenditures and $29.7 million to acquire a business operation from JDSU Uniphase. In 2008, we sold our PC business for $89.1 million, sold certain assets for $30.6 million and received $13.3 million from maturities of short-term investments. These items were partially offset by $121.5 million of capital expenditures.
Net cash used in financing activities was $162.6 million, $79.8 million and $120.0 million for 2010, 2009 and 2008, respectively. In 2010, we repaid $219.9 million of our debt, including $24.1 million acquired through an acquisition, posted an additional $10.8 million of collateral in the form of cash against certain of our collateralized obligations, and borrowed $65.0 million under two new short-term debt facilities. In 2009, we used $31.5 million of cash to repurchase certain debt at a discount prior to its maturity, we spent $29.2 million to repurchase shares of our common stock and we posted $19.1 million of collateral in the form of cash against certain of our collateralized obligations. In 2008, we redeemed $120 million of debt at par prior to its maturity.
As of October 2, 2010, we had $1.3 billion of total debt outstanding under various debt instruments.
Senior Floating Rate Notes. In 2007, we issued $300 million of Senior Floating Rate Notes due 2010 (the “2010 Notes”) and $300 million of Senior Floating Rate Notes due 2014 (the “2014 Notes”). The notes bear interest at a rate per annum, reset in full quarterly, equal to the three-month LIBOR plus 2.75%. In 2010, we redeemed all outstanding 2010 Notes in the amount of $175.7 million at par. The 2014 Notes will mature on June 15, 2014.
The 2014 Notes are senior unsecured obligations and rank equal in right of payment with all of our existing and future senior unsecured debt. We may redeem the 2014 Notes in whole or in part at redemption prices ranging from 100% to 102% of the principal amount of the 2014 Notes, plus accrued and unpaid interest.
In 2007, we entered into interest rate swap transactions with independent third parties to partially hedge these notes. The interest rate swaps had a total notional amount of $300.0 million and were designated as cash flow hedges. Under the swap agreements, we pay the counterparties a fixed rate of 5.594% in exchange for a three month LIBOR rate on the swaps. These swap agreements effectively fix the interest rate at 8.344% through 2014 on the hedged portion of debt. As a result of the debt redemption during 2010, our interest rate swap was reduced to $257 million.
During 2009, we repurchased $4.3 million and $42.6 million of our 2010 and 2014 Notes, respectively. In 2008, we redeemed $120.0 million of our 2010 Notes at par. Since the date of issuance of our 2010 and 2014 Notes for an aggregate principal amount of $600 million in 2007, we have redeemed or repurchased $342.6 million of these notes.
6.75% Senior Subordinated Notes. In 2005, we issued $400 million of 6.75% Senior Subordinated Notes due 2013 (the “6.75% Notes”) with a maturity date of March 1, 2013. During 2010, we repurchased $20.0 million of our 6.75% Notes at par plus a nominal premium and accrued interest. The 6.75% Notes are unsecured and subordinated in right of payment to all of our existing and future senior debt. We may redeem the 6.75% Notes, in whole or in part, at declining redemption prices ranging from 103.375% to 100% of the principal amount, plus accrued and unpaid interest, with the actual redemption price to be determined based on the date of redemption.
8.125% Senior Subordinated Notes. In 2006, we issued $600 million of 8.125% Senior Subordinated Notes due 2016 (the “8.125% Notes”) with a maturity date of March 1, 2016. The 8.125% Notes are unsecured and subordinated in right of payment to all of our existing and future senior debt.
We may redeem the 8.125% Notes, in whole or in part, at any time prior to March 1, 2011, at a redemption price equal to the sum of (1) the principal amount of the 8.125% Notes toc be redeemed, (2) accrued and unpaid interest on those 8.125% Notes and (3) a make-whole premium. We may redeem the 8.125% Notes, in whole or in part, beginning on March 1, 2011, at declining redemption prices ranging from 104.063% to 100% of the principal amount of the 8.125% Notes, plus accrued and unpaid interest with the actual redemption price to be determined based on the date of redemption.
Asset-backed Lending Facility. In 2009, we entered into a Loan, Guaranty and Security Agreement (the “Loan Agreement”), among us, the financial institutions party thereto from time to time as lenders, and Bank of America, N.A., as agent for such lenders.
The Loan Agreement provides for a $235 million secured asset-backed revolving credit facility, subject to a reduction of between $25 million to $50 million depending on the amount of our borrowing base, with an initial $50 million letter of credit sublimit. The facility may be increased by an additional $100 million upon obtaining additional commitments from the lenders then party to the Loan Agreement or new lenders. The Loan Agreement expires on the earlier of (i) the date that is 90 days prior to the maturity date of the 6.75% Notes if such notes are not repaid, redeemed, defeased, refinanced or reserved for under the borrowing base under the Loan Agreement prior to such date or (ii) November 19, 2013 (the “Maturity Date”).
Loans may be advanced under the Loan Agreement based on a borrowing base derived from specified percentages of the value of eligible accounts receivable and inventory. The borrowing base is subject to certain customary reserves and eligibility criteria. If, at any time, the aggregate principal amount of the loans outstanding plus the face amount of undrawn letters of credit under the Loan Agreement exceed the borrowing base then in effect, we must make a payment or post cash collateral (in the case of letters of credit) in an amount sufficient to eliminate such excess. There are currently no borrowings under this facility and $23.8 million in letters of credit outstanding under the Loan Agreement. As of October 2, 2010, we were eligible to borrow $115.9 million under this facility.
Loans under the Loan Agreement bear interest, at our option, at a rate equal to LIBOR or a base rate equal to Bank of America, N.A.'s announced prime rate, in each case plus a spread. A commitment fee accrues on any unused portion of the commitments under the Loan Agreement at a rate per annum based on usage. Principal, together with accrued and unpaid
interest, is due on the Maturity Date. Our obligations under the Loan Agreement are secured by certain accounts receivable and other assets.
Short-term Debt
During 2010, one of our wholly owned subsidiaries in China entered into a $50 million unsecured working capital loan facility. The facility bears interest at a rate equal to the three month Euro LIBOR plus a spread and expires in April 2011. The loan agreement contains certain negative covenants that, upon default, permit the bank to deny any further advances or extension of credit or to terminate the loan agreement. As of October 2, 2010, $30 million had been borrowed under this facility and was outstanding, and the Company was in compliance with all covenants. Each advance under the loan facility is due and payable one year from the date of the advance.
During 2010, one of our wholly owned subsidiaries in India entered into a $35 million working capital loan facility that contains no covenants and expires on December 31, 2010. Borrowings under the facility bear interest at a rate equal to Euro LIBOR plus a spread. As of October 2, 2010, $35 million had been borrowed under this facility and was outstanding. The facility requires dollar-for-dollar cash collateral for borrowings in excess of $25 million. Thus, we have pledged $10 million of cash collateral in connection with this loan facility.
Other Liquidity Matters.
In the ordinary course of business, we are or may become party to legal proceedings, claims and other contingencies, including environmental matters and examinations and investigations by government agencies. As of October 2, 2010, we had reserves of $22.3 million related to such matters. We cannot accurately predict the outcome of these matters or the amount or timing of cash flows that may be required to defend ourselves or to settle such matters. In 2010, we received a payment of $35 million in connection with a litigation settlement.
As of October 2, 2010, we had a long-term liability of $51.8 million for uncertain tax positions. Our estimate of our liability for uncertain tax positions is based on a number of subjective assessments, including the likelihood of a tax obligation being assessed, the amount of taxes (including interest and penalties), that would ultimately be payable, and our ability to settle any such obligations on favorable terms. Therefore, the amount of future cash flows associated with uncertain tax positions may be significantly higher or lower than our recorded liability.
In connection with our acquisition of BreconRidge Corporation (refer to Note 3 of the notes to our consolidated financial statements), $17.2 million of purchase consideration is payable between now and November 29, 2011. Additionally, contingent consideration of $4.2 million may become payable based on the outcome of future events.
We have entered into, and continue to enter into, various transactions that periodically require collateral. These obligations have historically arisen from customs, import/export, VAT, utility services, debt financing, foreign exchange contracts and interest rate swaps. We have collateralized, and may from time to time collateralize, such obligations as a result of counterparty requirements or for economic reasons. As of October 2, 2010, we had collateral of $29.3 million in the form of cash against certain of our collateralized obligations. Cash used for collateral reduces our cash available for other purposes.
Our debt agreements currently contain a number of restrictive covenants, including prohibitions on incurring additional debt, making investments and other restricted payments, paying dividends and redeeming or repurchasing capital stock and debt, subject to certain exceptions. We were in compliance with these covenants as of October 2, 2010. Our debt agreements do not contain any financial covenants that are currently applicable to us. We may be required to seek waivers or amendments to certain covenants for our debt instruments if we are unable to comply with the requirements of the covenants in the future. We may not be able to obtain such waivers or amendments on terms acceptable to us or at all, and, in such case, these covenants could materially and adversely impact our ability to conduct our business or carry out our restructuring plans.
Our next long-term debt maturity is in 2013. We may, however, consider early redemptions of our debt, possibly using proceeds from additional debt or equity financings. In addition to our existing covenant requirements, future debt financing may require us to comply with financial ratios and covenants. Any equity financing, may result in dilution to existing stockholders.
Our liquidity needs are largely dependent on changes in our working capital, including the extension of trade credit by our suppliers, investments in manufacturing inventory, facilities and equipment, repayments of obligations under outstanding indebtedness and repurchases of our outstanding debt. Our primary sources of liquidity include 1) cash of $592.8 million; 2) our $235 million credit facility, of which we were eligible to borrow $115.9 million as of October 2, 2010 based on the levels of eligible accounts receivable and inventories at that date; 3) short-term borrowing facilities of $85 million, of which $20 million was available as of October 2, 2010; and 4) cash generated from operations.
We believe our existing cash resources and other sources of liquidity, together with cash generated from operations, will be sufficient to meet our working capital requirements through at least the next 12 months. Should demand for our services decrease significantly over the next 12 months or we experience increases in delinquent or uncollectible accounts receivable, our cash provided by operations would be adversely impacted.
Contractual Obligations
The following is a summary of our long-term debt, including interest, and operating lease obligations as of October 2, 2010:
| | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | Fiscal Year Ending |
| Total | | 2011 | | 2012 | | 2013 | | 2014 | | 2015 | | Thereafter |
| (In thousands) |
Long-term debt, including interest | $ | 1,647,256 | | | $ | 95,877 | | | $ | 95,877 | | | $ | 80,915 | | | $ | 444,858 | | | $ | 306,160 | | | $ | 623,569 | |
Operating leases | 101,590 | | | 27,829 | | | 19,158 | | | 14,111 | | | 8,426 | | | 6,006 | | | 26,060 | |
Total contractual obligations | $ | 1,748,846 | | | $ | 123,706 | | | $ | 115,035 | | | $ | 95,026 | | | $ | 453,284 | | | $ | 312,166 | | | $ | 649,629 | |
We also have outstanding firm purchase orders with certain suppliers for the purchase of inventory. These purchase orders are generally short-term in nature. Orders for standard, or catalog, items can typically be canceled with little or no financial penalty. Our policy regarding non-standard or customized items dictates that such items are only ordered specifically for customers who have contractually assumed liability for the inventory. In addition, a substantial portion of catalog items covered by our purchase orders are procured for specific customers based on their purchase orders or a forecast under which the customer has contractually assumed liability for such material. Accordingly, the amount of liability from purchase obligations under these purchase orders is not expected to be significant or meaningful. As of October 2, 2010, we had an insignificant amount of capital lease obligations.
As of October 2, 2010, we were unable to reliably estimate when cash settlements with taxing authorities may occur with respect to our unrecognized tax benefits of $51.8 million; therefore, such amounts are not included in the table above.
We provided guarantees to various third parties in the form of letters of credit totaling $23.8 million as of October 2, 2010. The letters of credit cover various guarantees including workers' compensation claims and customs duties.
We have defined benefit pension plans with an underfunded amount of $10.7 million at October 2, 2010. We will be required to provide additional funding to these plans in the future.
Our future needs for financial resources include increases in working capital to support anticipated sales growth, investments in facilities and equipment and repayments of outstanding indebtedness.
Quarterly Results ( Unaudited )
The following tables contain selected unaudited quarterly financial data for the eight fiscal quarters in 2010 and 2009. In management's opinion, the unaudited data has been prepared on the same basis as the audited information and includes all adjustments (consisting only of normal recurring adjustments) necessary for a fair presentation of the data for the periods presented. Our results of operations have varied and may continue to fluctuate significantly from quarter to quarter. The results of operations in any period should not be considered indicative of the results to be expected from any future period.
| | | | | | | | | | | | | | | |
| Year ended October 2, 2010 |
| First Quarter | | Second Quarter | | Third Quarter | | Fourth Quarter (1) |
| (In thousands, except per share data) |
Net sales | $ | 1,478,302 | | | $ | 1,527,451 | | | $ | 1,625,170 | | | $ | 1,687,768 | |
Gross profit | $ | 109,687 | | | $ | 117,477 | | | $ | 124,115 | | | $ | 131,711 | |
Gross margin | 7.4 | % | | 7.7 | % | | 7.6 | % | | 7.8 | % |
Operating income | $ | 39,658 | | | $ | 45,238 | | | $ | 61,740 | | | $ | 58,163 | |
Operating margin | 2.7 | % | | 3.0 | % | | 3.8 | % | | 3.4 | % |
Net income | $ | 59,382 | | | $ | 10,091 | | | $ | 21,563 | | | $ | 31,399 | |
Basic net income per share | $ | 0.76 | | | $ | 0.13 | | | $ | 0.27 | | | $ | 0.39 | |
Diluted net income per share | $ | 0.74 | | | $ | 0.12 | | | $ | 0.26 | | | $ | 0.38 | |
(1) During the fourth quarter, we entered into a revised arrangement with a customer to transfer control of a portion of one of our logistics facilities to the customer. We deliver products manufactured by us to this logistics facility and provide certain logistics services to our customer at this facility. We receive a separate fee for these logistics services, which we recognize as revenue as those services are performed. Prior to transferring control of the facility to our customer, we recognized revenue related to our manufacturing services when the product was delivered to the customer upon completion of the logistics services. Upon transferring control of a portion of our logistics facility to our customer, we now recognize revenue related to our manufacturing services when the product is delivered to the customer-controlled space. The effect of the new arrangement was to increase fourth quarter revenue, gross profit, net income, and diluted earnings per share by $29.0 million, $2.8 million, $2.8 million, and $0.03 per share, respectively.
| | | | | | | | | | | | | | | |
| Year ended October 3, 2009 |
| First Quarter | | Second Quarter | | Third Quarter | | Fourth Quarter (1) |
| (In thousands, except per share data) |
Net sales | $ | 1,419,264 | | | $ | 1,195,107 | | | $ | 1,209,150 | | | $ | 1,353,960 | |
Gross profit | $ | 83,798 | | | $ | 68,590 | | | $ | 75,760 | | | $ | 94,330 | |
Gross margin(1) | 5.9 | % | | 5.7 | % | | 6.3 | % | | 7.0 | % |
Operating income (loss) | $ | 1,936 | | | $ | (13,166 | ) | | $ | (1,147 | ) | | $ | 7,721 | |
Operating margin (loss) | 0.1 | % | | (1.1 | )% | | (0.1 | )% | | 0.6 | % |
Net loss | $ | (25,673 | ) | | $ | (37,938 | ) | | $ | (41,526 | ) | | $ | (32,685 | ) |
Basic and diluted net loss per share | $ | (0.29 | ) | | $ | (0.45 | ) | | $ | (0.52 | ) | | $ | (0.42 | ) |
(1) Improvement in the fourth quarter, relative to the third quarter, is primarily attributable to increased volume and a more favorable product mix, whereby higher gross margin products represented a greater percentage of our net sales.
Item 7A. Quantitative and Qualitative Disclosures About Market Risk
Interest Rate Risk
Our primary exposure to market risk for changes in interest rates relates to certain of our outstanding debt obligations. Currently, we do not use derivative financial instruments in our investment portfolio. We invest in high quality credit issuers and, by policy, limit the amount of principal exposure with any one issuer. As stated in our policy, we seek to ensure the safety and preservation of our invested principal funds by limiting default and market risk.
We seek to mitigate default risk by investing in high quality credit securities and by positioning our investment portfolio to respond to a significant reduction in credit rating of any investment issuer, guarantor or depository. We seek to mitigate market risk by limiting the principal and investment term of funds held with any one issuer and by investing funds in marketable securities with active secondary or resale markets. As of October 2, 2010, we had no short-term investments.
As of October 2, 2010, we had $1.2 billion of long-term debt, of which $980.0 million bears interest at a fixed rate and $257.4 million of variable rate debt has been converted to fixed rate through the use of interest rate swaps. Accordingly, none of our long-term debt has exposure to changes in interest rates. We also had $65.0 million of variable rate short-term borrowings outstanding as of October 2, 2010. Due to the insignificance of the amount, the effect of an immediate 10% change in interest rates would not have a significant impact on our results of operations.
Foreign Currency Exchange Risk
We transact business in foreign countries. Our foreign exchange policy requires that we take certain steps to limit our foreign exchange exposures in certain assets and liabilities and forecasted cash flows. However, such policy does not require us to hedge all foreign exchange exposures. Further, foreign currency hedges are based on forecasted transactions, the amount of which may differ from that actually incurred. As a result, we can experience foreign exchange rate gains and losses in our results of operations.
Our primary foreign currency cash flows are in certain Asian and European countries, Brazil and Mexico. We enter into short-term foreign currency forward contracts to hedge currency exposures associated with certain monetary assets and liabilities denominated in foreign currencies. These contracts typically have maturities of up to two months and are not designated as part of a hedging relationship. All outstanding foreign currency forward contracts are marked-to-market at the end of the period with unrealized gains and losses included in other income (expense), net, in the consolidated statements of operations. As of October 2, 2010 and October 3, 2009, we had outstanding foreign currency forward contracts to exchange various foreign currencies for U.S. dollars in the aggregate notional amount of $290.7 million and $354.2 million, respectively.
We also utilize foreign currency forward contracts to hedge certain operational (“cash flow”) exposures resulting from changes in foreign currency exchange rates. Such exposures result from forecasted sales denominated in currencies different from those for cost of sales and other expenses. These contracts are typically up to two months in duration and are accounted for as cash flow hedges. The effective portion of changes in the fair value of the contracts is recorded in stockholders' equity as a separate component of accumulated other comprehensive income and is recognized in the consolidated statement of operations when the hedged item affects earnings. We had forward contracts related to cash flow hedges in various foreign currencies in the aggregate notional amount of $80.4 million and $32.1 million as of October 2, 2010 and October 3, 2009, respectively. The net impact of an immediate 10% change in exchange rates would not be material to our consolidated financial statements, provided we accurately forecast our foreign currency exposure. If such forecasts are materially inaccurate, we could incur significant gains or losses.
Item 8. Financial Statements and Supplementary Data
The information required by this item is included below and incorporated by reference from the financial statement schedule included in “Part IV-Item 15(a)(2)” and the selected quarterly financial data referred to in “Part II-Item 7-Management's Discussion and Analysis of Financial Condition and Results of Operations-Quarterly Results (Unaudited).”
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
The Board of Directors and Stockholders
Sanmina-SCI Corporation:
We have audited the accompanying consolidated balance sheets of Sanmina-SCI Corporation and subsidiaries (the Company) as of October 2, 2010 and October 3, 2009, and the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows for each of the fiscal years in the three-year period ended October 2, 2010. In connection with our audits of the consolidated financial statements, we also have audited financial statement schedule II as set forth under Item 15. We also have audited the Company’s internal control over financial reporting as of October 2, 2010, based on criteria established in Internal Control – Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for these consolidated financial statements and financial statement schedule, and for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule and an opinion on the Company’s internal control over financial reporting based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the consolidated financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Sanmina-SCI Corporation and subsidiaries as of October 2, 2010 and October 3, 2009, and the results of their operations and their cash flows for each of the fiscal years in the three-year period ended October 2, 2010, in conformity with U.S. generally accepted accounting principles. Also in our opinion, the related financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of October 2, 2010, based on criteria established in Internal Control – Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission.
As discussed in note 3 to the consolidated financial statements, the Company adopted the provisions of Financial Accounting Standards No. 141(R) (Revised 2007), Business Combinations (ASC Topic 805, Business Combinations), at the beginning of fiscal 2010.
/s/ KPMG LLP
Mountain View, California
November 24, 2010
SANMINA-SCI CORPORATION
CONSOLIDATED BALANCE SHEETS
| | | | | | | |
| Year Ended |
| October 2, 2010 | | October 3, 2009 |
| (In thousands, except par value) |
ASSETS | | | |
Current assets: | | | |
Cash and cash equivalents | $ | 592,812 | | | $ | 899,151 | |
Accounts receivable, net of allowances of $16,752 and $13,422, respectively | 1,018,612 | | | 668,474 | |
Inventories | 844,347 | | | 761,391 | |
Prepaid expenses and other current assets | 81,191 | | | 78,128 | |
Assets held for sale | 53,047 | | | 68,902 | |
Total current assets | 2,590,009 | | | 2,476,046 | |
Property, plant and equipment, net | 570,258 | | | 543,497 | |
Other | 141,529 | | | 104,354 | |
Total assets | $ | 3,301,796 | | | $ | 3,123,897 | |
LIABILITIES AND STOCKHOLDERS' EQUITY | | | | | |
Current liabilities: | | | | | |
Accounts payable | $ | 923,038 | | | $ | 780,876 | |
Accrued liabilities | 140,371 | | | 140,926 | |
Accrued payroll and related benefits | 122,934 | | | 98,408 | |
Short-term debt | 65,000 | | | — | |
Current portion of long-term debt | — | | | 175,700 | |
Total current liabilities | 1,251,343 | | | 1,195,910 | |
Long-term liabilities: | | | | |
Long-term debt | 1,240,666 | | | 1,262,014 | |
Other | 148,186 | | | 146,903 | |
Total long-term liabilities | 1,388,852 | | | 1,408,917 | |
Commitments and contingencies (Note 8) | | | | | |
Stockholders' equity: | | | | | |
Preferred stock, $.01 par value, authorized 5,000 shares, none issued and outstanding | — | | | — | |
Common stock, $.01 par value, authorized 166,667 shares, 93,074 and 91,914 shares issued, respectively, and 79,722 and 78,566 shares outstanding, respectively | 797 | | | 786 | |
Treasury stock, 13,352 and 13,348 shares, respectively, at cost | (214,530 | ) | | (213,720 | ) |
Additional paid-in capital | 6,031,174 | | | 6,012,146 | |
Accumulated other comprehensive income | 54,217 | | | 52,350 | |
Accumulated deficit | (5,210,057 | ) | | (5,332,492 | ) |
Total stockholders' equity | 661,601 | | | 519,070 | |
Total liabilities and stockholders' equity | $ | 3,301,796 | | | $ | 3,123,897 | |
See accompanying notes to the consolidated financial statements.
SANMINA-SCI CORPORATION
CONSOLIDATED STATEMENTS OF OPERATIONS
| | | | | | | | | | | |
| Year Ended |
| October 2, 2010 | | October 3, 2009 | | September 27, 2008 |
| (In thousands, except per share amounts) |
| |
Net sales | $ | 6,318,691 | | | $ | 5,177,481 | | | $ | 7,202,403 | |
Cost of sales | 5,835,701 | | | 4,855,003 | | | 6,678,297 | |
Gross profit | 482,990 | | | 322,478 | | | 524,106 | |
Operating expenses: | | | | | |
Selling, general and administrative | 252,534 | | | 238,194 | | | 317,045 | |
Research and development | 13,004 | | | 16,685 | | | 19,546 | |
Restructuring and integration costs | 21,822 | | | 57,260 | | | 81,376 | |
Amortization of intangible assets | 3,555 | | | 4,817 | | | 6,600 | |
Impairment of goodwill and tangible assets | 1,100 | | | 10,178 | | | 483,699 | |
Gain on sales of long-lived assets | (13,824 | ) | | — | | | — | |
Total operating expenses | 278,191 | | | 327,134 | | | 908,266 | |
| | | | | |
Operating income (loss) | 204,799 | | | (4,656 | ) | | (384,160 | ) |
| | | | | |
Interest income | 2,246 | | | 6,499 | | | 19,744 | |
Interest expense | (108,144 | ) | | (116,988 | ) | | (127,231 | ) |
Other income (expense), net | 41,538 | | | (5,970 | ) | | 3,553 | |
Gain (loss) on extinguishment of debt | (1,197 | ) | | 8,545 | | | (2,237 | ) |
Interest and other income (expense), net | (65,557 | ) | | (107,914 | ) | | (106,171 | ) |
Income (loss) from continuing operations before income taxes | 139,242 | | | (112,570 | ) | | (490,331 | ) |
Provision for income taxes | 16,807 | | | 25,252 | | | 22,605 | |
Income (loss) from continuing operations | 122,435 | | | (137,822 | ) | | (512,936 | ) |
Income from discontinued operations, net of tax | — | | | — | | | 24,987 | |
Net income (loss) | $ | 122,435 | | | $ | (137,822 | ) | | $ | (487,949 | ) |
Basic earnings (loss) per share: | | | | | | | | |
Continuing operations | $ | 1.55 | | | $ | (1.67 | ) | | $ | (5.80 | ) |
Discontinued operations | $ | — | | | $ | — | | | $ | 0.28 | |
Net income (loss) | $ | 1.55 | | | $ | (1.67 | ) | | $ | (5.52 | ) |
Diluted earnings (loss) per share: | | | | | |
Continuing operations | $ | 1.48 | | | $ | (1.67 | ) | | $ | (5.80 | ) |
Discontinued operations | $ | — | | | $ | — | | | $ | 0.28 | |
Net income (loss) | $ | 1.48 | | | $ | (1.67 | ) | | $ | (5.52 | ) |
Weighted-average shares used in computing per share amounts: | | | | | |
Basic | 79,195 | | | 82,528 | | | 88,454 | |
Diluted | 82,477 | | | 82,528 | | | 88,454 | |
See accompanying notes to the consolidated financial statements.
SANMINA-SCI CORPORATION
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)
| | | | | | | | | | | |
| Year Ended |
| October 2, 2010 | | October 3, 2009 | | September 27, 2008 |
| (In thousands, except per share amounts) |
| |
Net income (loss) | $ | 122,435 | | | $ | (137,822 | ) | | $ | (487,949 | ) |
Other comprehensive income (loss): | | | | | |
Net unrealized loss on derivative financial instruments, net of tax | (5,373 | ) | | (10,322 | ) | | (11,891 | ) |
Foreign currency translation adjustments | 10,996 | | | 11,545 | | | 8,340 | |
Changes in unrecognized net actuarial loss and unrecognized transition costs, net of tax | (3,756 | ) | | (4,650 | ) | | (1,732 | ) |
Comprehensive income (loss) | $ | 124,302 | | | $ | (141,249 | ) | | $ | (493,232 | ) |
See accompanying notes to the consolidated financial statements.
SANMINA-SCI CORPORATION
CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY
| | | | | | | | | | | | | | | | | | | | | | | | | |
| Common Stock and Additional Paid-in Capital | | Treasury Stock | | | | | | |
| Number of Shares | | Amount | | Number of Shares | | Amount | | Accumulated Other Comprehensive Income | | Accumulated Deficit | | Total |
| (In thousands) |
BALANCE AT SEPTEMBER 29, 2007 | 91,460 | | | $ | 5,983,479 | | | (3,133 | ) | | $ | (185,541 | ) | | $ | 61,060 | | | $ | (4,706,721 | ) | | $ | 1,152,277 | |
Issuances of restricted stock and stock options, net of cancellations | 220 | | | (1 | ) | | — | | | — | | | — | | | — | | | (1 | ) |
Cumulative translation adjustment | — | | | — | | | — | | | — | | | 8,340 | | | — | | | 8,340 | |
Unrealized loss on derivative financial instruments, net of tax | — | | | — | | | — | | | — | | | (11,891 | ) | | — | | | (11,891 | ) |
Changes in unrecognized net actuarial loss and unrecognized transition costs, net of tax | — | | | — | | | — | | | — | | | (1,732 | ) | | — | | | (1,732 | ) |
Stock-based compensation | — | | | 14,337 | | | — | | | — | | | — | | | — | | | 14,337 | |
Repurchases of treasury stock | — | | | (709 | ) | | (46 | ) | | 816 | | | — | | | — | | | 107 | |
Net loss | — | | | — | | | — | | | — | | | — | | | (487,949 | ) | | (487,949 | ) |
BALANCE AT SEPTEMBER 27, 2008 | 91,680 | | | $ | 5,997,106 | | | (3,179 | ) | | $ | (184,725 | ) | | $ | 55,777 | | | $ | (5,194,670 | ) | | $ | 673,488 | |
Issuances of restricted stock and stock options, net of cancellations | 234 | | | — | | | — | | | — | | | — | | | — | | | — | |
Cumulative translation adjustment | — | | | — | | | — | | | — | | | 11,545 | | | — | | | 11,545 | |
Unrealized loss on derivative financial instruments, net of tax | — | | | — | | | — | | | — | | | (10,322 | ) | | — | | | (10,322 | ) |
Changes in unrecognized net actuarial loss and unrecognized transition costs, net of tax | — | | | — | | | — | | | — | | | (4,650 | ) | | — | | | (4,650 | ) |
Stock-based compensation | — | | | 15,994 | | | — | | | — | | | — | | | — | | | 15,994 | |
Repurchases of treasury stock | — | | | (168 | ) | | (10,169 | ) | | (28,995 | ) | | — | | | — | | | (29,163 | ) |
Net loss | — | | | — | | | — | | | — | | | — | | | (137,822 | ) | | (137,822 | ) |
BALANCE AT OCTOBER 3, 2009 | 91,914 | | | $ | 6,012,932 | | | (13,348 | ) | | $ | (213,720 | ) | | $ | 52,350 | | | $ | (5,332,492 | ) | | $ | 519,070 | |
Issuances of restricted stock and stock options, net of cancellations | 1,160 | | | 3,821 | | | — | | | — | | | — | | | — | | | 3,821 | |
Cumulative translation adjustment | | | — | | | — | | | — | | | 10,996 | | | — | | | 10,996 | |
Unrealized loss on derivative financial instruments, net of tax | | | — | | | — | | |