Sanmina 10-K_Sept 29, 2012
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
Form 10-K
(Mark One)
[x] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended September 29, 2012
or
[ ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from to .
Commission File Number 0-21272
Sanmina Corporation
(Exact name of registrant as specified in its charter)
|
| | |
Delaware | | 77-0228183 |
(State or other jurisdiction of incorporation or organization) | | (I.R.S. Employer Identification Number) |
| | |
2700 N. First St., San Jose, CA | | 95134 |
(Address of principal executive offices) | | (Zip Code) |
Registrant's telephone number, including area code:
(408) 964-3500
Securities registered pursuant to Section 12(b) of the Act:
Common Stock, $0.01 Par Value
Securities registered pursuant to Section 12(g) of the Act:
None
(Title of Class)
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes [ ] No [ x ]
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Securities Act. Yes [ ] No [ x ]
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes [ x ] No [ ]
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes [ x ] No [ ]
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§232.405 of this chapter) is not contained herein, and will not be contained, to the best of the registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [ ]
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
|
| | |
Large accelerated filer [ ] | | Accelerated filer [ x ] |
Non-accelerated filer [ ] | | Smaller reporting company [ ] |
(Do not check if a smaller reporting company) | | |
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes [ ] No [ x ]
The aggregate market value of the voting and non-voting common stock held by non-affiliates of the registrant was approximately $581,683,037 as of March 30, 2012, based upon the last reported sale price of the common stock on the NASDAQ Global Select Market on March 30, 2012.
As of November 9, 2012, the number of shares outstanding of the registrant's common stock was 81,765,109.
DOCUMENTS INCORPORATED BY REFERENCE
Certain information is incorporated into Part III of this report by reference to the Proxy Statement for the registrant's annual meeting of stockholders to be held on March 11, 2013 to be filed with the Securities and Exchange Commission pursuant to Regulation 14A not later than 120 days after the end of the fiscal year covered by this Form 10-K.
SANMINA CORPORATION
INDEX
|
| | |
PART I |
Item 1. | Business | |
Item 1A. | Risk Factors | |
Item 1B. | Unresolved Staff Comments | |
Item 2. | Properties | |
Item 3. | Legal Proceedings | |
Item 4. | Mine Safety Disclosures | |
PART II |
Item 5. | Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities | |
Item 6. | Selected Financial Data | |
Item 7. | Management's Discussion and Analysis of Financial Condition and Results of Operations | |
Item 7A. | Quantitative and Qualitative Disclosures About Market Risk | |
Item 8. | Financial Statements and Supplementary Data | |
Item 9. | Changes In and Disagreements With Accountants on Accounting and Financial Disclosure | |
Item 9A. | Controls and Procedures | |
Item 9B. | Other Information | |
PART III |
Item 10. | Directors and Executive Officers of the Registrant | |
Item 11. | Executive Compensation | |
Item 12. | Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters | |
Item 13. | Certain Relationships and Related Transactions | |
Item 14. | Principal Accountant Fees and Services | |
PART IV |
Item 15. | Exhibits and Financial Statement Schedules | |
Signatures | |
Item 1. Business
Overview
Sanmina Corporation (“we” or “Sanmina”) is a leading global provider of integrated manufacturing solutions, components, products and repair, logistics and after-market services. We provide these comprehensive offerings primarily to original equipment manufacturers, or OEMs, in the communications networks, computing and storage, multimedia, industrial and semiconductor capital equipment, defense and aerospace, medical, clean technology (or "CleanTech") and automotive industries. The combination of our advanced technologies, extensive manufacturing expertise and economies of scale enables us to meet the specialized needs of our customers in these markets in a cost-effective manner. We were originally incorporated in Delaware in May 1989. On November 15, 2012, we changed our name from Sanmina-SCI Corporation to Sanmina Corporation.
Our end-to-end solutions, combined with our global expertise in supply chain management, enable us to manage our customers' products throughout their life cycles. These services include:
| |
• | product design and engineering, including initial development, detailed design, prototyping, validation, preproduction services and manufacturing design release; |
| |
• | manufacturing of components, subassemblies and complete systems; |
| |
• | final system assembly and test; |
| |
• | direct order fulfillment and logistics services; and |
| |
• | after-market product service and support. |
We participate in the Electronics Manufacturing Services (EMS) industry and manage our operations as two businesses:
1) Integrated Manufacturing Solutions (IMS), which is a reportable segment consisting of printed circuit board assembly and test, optical and RF (Radio Frequency) modules, final system assembly and test, and direct order fulfillment. This segment generated 81% of our total revenue in 2012.
2) Components, Products and Services (CPS), consisting of Components, which includes interconnect systems (printed circuit board fabrication and backplane and cable assemblies) and mechanical systems (enclosures, precision machining and plastic injection molding); Products, which includes memory and SSD products from Viking Technology; products from SCI Technology for use in the defense and aerospace industry; and storage products from Newisys; and Services, which includes design, engineering, logistics and repair services.
We have facilities in 25 countries on six continents. We seek to locate our facilities near our customers and our customers' end markets in major centers for the electronics industry or in lower cost locations. Many of our plants located near our customers and their end markets are focused primarily on final system assembly and test, while our plants located in lower cost areas engage primarily in higher volume, less complex component and subsystem manufacturing and assembly.
We have become one of the largest global manufacturing solutions providers by capitalizing on our competitive strengths including our:
| |
• | product design and engineering resources; |
| |
• | vertically integrated manufacturing solutions; |
| |
• | customer-focused organization; and |
| |
• | expertise in serving diverse end markets. |
Industry Overview
EMS companies are the principal beneficiaries of the increased use of outsourced manufacturing services by the electronics and other industries. Outsourced manufacturing refers to an OEM's use of EMS companies, rather than internal manufacturing capabilities, to manufacture their products. Historically, EMS companies generally manufactured only components or partial assemblies. As the EMS industry has evolved, OEMs have increased their reliance on EMS companies for additional, more complex manufacturing services including design services. Today, EMS companies manufacture and test complete systems and manage the entire supply chains of their customers. Industry leading EMS companies offer end-to-end services including product design and engineering, manufacturing, final system assembly and test, direct order fulfillment and logistics, after-market product service and support, and global supply chain management.
We believe increased outsourced manufacturing by OEMs will continue because it allows OEMs to:
| |
• | reduce operating costs and capital investment; |
| |
• | focus on core competencies; |
| |
• | access leading design and engineering capabilities; |
| |
• | improve supply chain management and purchasing power; |
| |
• | access global manufacturing services; and |
| |
• | accelerate time to market. |
Our Business Strategy
Our objective is to maintain and enhance our leadership position in the technology industry. Key elements of our strategy include:
Capitalizing on Our Comprehensive Solutions. We intend to capitalize on our end-to-end solutions which we believe will allow us to both sell additional solutions to our existing customers and attract new customers. Our end-to-end solutions include product design and engineering, manufacturing, final system assembly and test, direct order fulfillment and logistics services, after-market product service and support and supply chain management. Our vertically integrated manufacturing solutions enable us to manufacture additional system components and subassemblies for our customers. When we provide a customer with a number of services, such as component manufacturing or higher value-added solutions, we are often able to improve our margins and profitability. Consequently, our goal is to increase the number of manufacturing programs for which we provide multiple solutions. To achieve this goal, our sales and marketing organization seeks to cross-sell our solutions to customers.
Extending Our Technology Capabilities. We rely on advanced processes and technologies to provide our products, components and vertically integrated manufacturing solutions. We continually strive to improve our manufacturing processes and have adopted a number of quality improvement and measurement techniques to monitor our performance. We work with our customers to anticipate their future product and manufacturing requirements and align our technology investment activities with their needs. We use our design expertise to develop product technology platforms that we can customize by incorporating other components and subassemblies to meet the needs of particular OEMs. These technologies enhance our ability to manufacture complex, high-value added products, allowing us to continue to win business from existing and new customers.
Attract and Retain Long-Term Customer Partnerships. A core component of our strategy is to attract, build and retain long-term partnerships with companies in growth industries that will benefit from our global footprint and unique value proposition in advanced electronics manufacturing. As a result of this customer-centric approach, we have experienced business
growth from both existing and new customers and will continue to cultivate these partnerships with additional products and value-added solutions.
Joint Design Manufacturing Solutions. As a result of customer feedback, and our customers' desire to manage research and development expenses, we have expanded our product design services to develop systems and components jointly with our customers. In a JDM model, our customers bring market knowledge and product requirements. We offer complete design engineering and new product introduction (NPI) services. Our offerings in design engineering include product architecture, development, integration, regulatory and qualification services; while NPI services include quick-turn prototyping, supply chain readiness, functional test development and release to volume production.
Continuing to Penetrate Diverse End Markets. We focus our marketing and sales efforts on major end markets within the technology industry. We have targeted markets that we believe offer significant growth opportunities and for which OEMs sell complex products that are subject to rapid technological change because the manufacturing of these products requires higher value-added services. Our approach to our target markets is two-fold: we intend to strengthen our significant presence in the communications, computing and multimedia markets, and also focus on under-penetrated target markets, including the medical, industrial and semiconductor capital equipment, CleanTechnology, automotive, and defense and aerospace industries, many of which have not extensively relied upon outsource manufacturing companies in the past. We intend to continue our diversification across market segments and customers to reduce our dependence on any particular market.
Pursuing Strategic Transactions. We seek to undertake strategic transactions that give us the opportunity to access new customers' products, manufacturing solutions, repair service capabilities, technologies and geographic markets. In addition, we plan to continue to pursue OEM divestiture transactions that will augment existing strategic customer relationships with favorable supply agreement terms or build new relationships with customers in attractive end markets. Potential future transactions may include a variety of different business arrangements, including acquisitions, spin-offs, strategic partnerships, restructurings and divestitures. We intend to continue to evaluate and pursue strategic opportunities on a highly selective basis.
Continuing to Seek Cost Savings and Efficiency Improvements. We seek to optimize our facilities to provide cost-efficient services for our customers. We maintain extensive operations in lower cost locations, including Latin America, Eastern Europe, China, Southeast Asia and India, and we plan to expand our presence in these lower cost locations as appropriate to meet the needs of our customers. We believe we are well positioned to take advantage of future opportunities on a global basis as a result of our existing footprint in 25 countries.
Our Competitive Strengths
We believe our competitive strengths differentiate us from our competitors and enable us to better serve the needs of OEMs. Our competitive strengths include:
End-to-End Solutions. We provide solutions throughout the world to support our customers' products during their entire life cycle, from product design and engineering, through manufacturing, to direct order fulfillment, logistics and after-market product service and support. We believe our end-to-end solutions are more comprehensive than the services offered by our competitors because of our focus on adding value before and after the actual manufacturing of our customers' products. Our end-to-end solutions enable us to provide our customers with a single source of supply for their manufacturing needs, reduce the time required to bring products to market, lower product costs and allow our customers to focus on those activities in which they expect to add the highest value. We believe that our end-to-end solutions allow us to develop closer relationships with our customers and more effectively compete for their future business.
Product Design and Engineering Resources. We provide product design and engineering services for new product designs, cost reductions and design for manufacturability (DFx) reviews. Our engineers work with our customers during the complete product life cycle. Our design and NPI centers provide turnkey system design services including: electrical, mechanical, thermal, software, layout, simulation, test development, design verification, validation, regulatory compliance and testing services. We design high speed digital, analog, radio frequency, mixed-signal, wired, wireless, optical and electro-mechanical products.
Our engineering engagement models include Joint Design Manufacturing (JDM), Contract Design Manufacturing (CDM) and consulting engineering for DFx, Value Engineering (cost reduction re-design), and design for environmental compliance with the European Union's Restrictions of Hazardous Substances, or RoHS, and Waste Electrical and Electronic Equipment or WEEE. We focus on industry segments that include Communications Networks, Computing and Storage, Medical, Multimedia, Defense & Aerospace, Industrial & Semiconductor Capital Equipment, CleanTech and Automotive.
System solutions for these industry segments are supported by our vertically integrated component technologies, namely, printed circuit boards, backplanes, enclosures, cable assemblies, precision machining, plastics and die castings, memory modules, and optical, RF and microelectronics modules.
In these engagement models, our customers bring market knowledge and product requirements. We provide complete design engineering and new product introductions (NPI) services. For JDM products, typically the intellectual property is jointly owned by us and the customer and we realize manufacturing revenue associated with building and shipping the product. For CDM projects, customers pay for all services and own the intellectual property.
Vertically Integrated Manufacturing Solutions. We provide a range of vertically integrated manufacturing solutions. Key system components that we manufacture include complete printed circuit boards and printed circuit board assemblies, backplanes and backplane assemblies, enclosures, cable assemblies, precision machine components, optical modules and memory modules. By manufacturing these system components and subassemblies ourselves, we enhance continuity of supply and reduce costs for our customers. In addition, we are able to have greater control over the production of our customers' products and retain incremental profit opportunities for us. Examples of products that we manufacture using our full range of services include wireless base stations, network switches, routers and gateways, optical switches, enterprise-class servers and storage appliances, set-top boxes, magnetic resonance imaging (MRI) and computer tomography (CT) scanners, and equipment used in the semiconductor chip manufacturing process, including equipment for photolithography, chemical mechanical polishing, physical vapor deposition, automated handling tools and robotics for wafer transfer.
Advanced Technologies. We provide services utilizing advanced technologies which we believe allow us to differentiate ourselves from our competitors. These advanced technologies include the fabrication of complex printed circuit boards and backplanes having up to 60 layers and process capabilities for a range of low signal loss, high performance materials, buried capacitors and resistors and high density interconnects using micro via holes that are formed using laser drills. We have added capabilities to manufacture high density flex and rigid-flex printed circuit boards (PCB) with up to 30 layers and 8 transition layers in support of Defense and Aerospace markets along with high end medical electronics.
Our printed circuit board assembly technologies include micro ball grid arrays, fine pitch discretes and small form factor radio frequency and optical components, as well as advanced packaging technologies used in high pin count application specific integrated circuits and network processors. We use innovative design solutions and advanced metal forming techniques to develop and fabricate high-performance indoor and outdoor chassis, enclosures and frames. Our assembly services use advanced technologies including precision optical alignment, multi-axis precision stages and machine vision technologies. We use sophisticated procurement and production management tools to effectively manage inventories for our customers and ourselves. We have also developed build-to-order (BTO) and configure-to-order (CTO) systems that enable us to manufacture and ship finished systems within 48 to 72 hours after receipt of an order. We have established a centralized EMS technology council to coordinate the development and introduction of new technologies to meet our customers' needs in various locations and to increase collaboration among our facilities.
Global Manufacturing Capabilities. Most of our customers compete and sell their products on a global basis. As such, they require global solutions that include regional manufacturing for selected end markets, especially when time to market, local manufacturing or content and low cost solutions are critical objectives. Our global network of facilities in 25 countries provides our customers a combination of sites to maximize both the benefits of regional and low cost manufacturing solutions and repair services. To manage and coordinate our global operations, we employ an enterprise-wide ERP system at substantially all of our manufacturing locations that operates on a single IT platform and provides us with company-wide information regarding component inventories and orders. This system enables us to standardize planning and purchasing at the facility level and to optimize inventory management and utilization. Our systems also enable our customers to receive key information regarding the status of their programs.
Global Supplier Base. We purchase large quantities of electronic components and other materials from a wide range of suppliers. Our primary task involves consolidating our global spend to create the synergy and leverage to drive our supply base for better cost competitiveness and more favorable terms and leading edge supply chain solutions. As a result, we often receive more favorable terms and supply chain solutions from suppliers which can enable us to provide our customers with greater total cost reductions than they can obtain themselves. Our strong supplier relationships also often enable us to obtain electronic components and other materials that are in short supply as well as provide us the necessary support to optimize the utilization of our inventories.
Supply chain management also involves the planning, purchasing and warehousing of product components. The other objective of our supply chain management services is to reduce excess component inventory in the supply chain by scheduling deliveries of components at a competitive price and on a just-in-time basis. We use sophisticated production management
systems to manage our procurement and manufacturing processes in an efficient and cost effective manner. We collaborate with our customers to enable us to respond to their changing component requirements for their products and to reflect any changes in these requirements in our production management systems. These systems often enable us to forecast future supply and demand imbalances and develop strategies to help our customers manage their component requirements. Our enterprise-wide ERP systems provide us with company-wide information regarding component inventories and orders to optimize inventories, planning and purchasing at the plant level.
Customer-Focused Organization. We believe customer relationships are critical to our success and our organization is focused on providing our customers with a high level of customer service. Our key customer accounts are managed by dedicated account teams including a global business manager directly responsible for account management. Global business managers coordinate activities across divisions to effectively satisfy our customers' requirements and have direct access to our senior management to quickly address customer opportunities/concerns. Local customer account teams further support the global teams and are linked by a comprehensive communications and information management infrastructure.
Expertise in Serving Diverse End Markets. We have experience in serving our customers in the communications, computing and storage, multimedia, industrial and semiconductor capital equipment, defense and aerospace, medical, CleanTech and automotive markets. Our diversification across end markets reduces our dependence upon any one customer or segment. In order to cater to the specialized needs of customers in particular market segments, we have dedicated personnel, and in some cases facilities, with industry-specific capabilities and expertise. We also maintain compliance with industry standards and regulatory requirements applicable to certain markets including, among others, the medical and defense and aerospace sectors.
Our Products and Solutions
We offer our OEM customers a diverse set of products and solutions with a focus on wireless, wireline and optical communications and network infrastructure equipment like switches, routers and base stations, enterprise computing servers and storage systems, defense and commercial avionics and communications, medical imaging, diagnostic and patient monitoring systems, digital satellite set-top boxes, point of sale, and gaming systems, semiconductor tools for metrology, lithography, dry and wet processing, industrial products like large format printers and cash transactions, and clean technology products such as solar and wind products, fuel cells, LED lighting, smart meters and battery systems. These products may require us to use some or all of our end-to-end solutions including design, component technologies and logistics and repair services.
Integrated Manufacturing Solutions includes:
Printed Circuit Board Assembly and Test. Printed circuit board assembly involves attaching electronic components, such as integrated circuits, capacitors, microprocessors, resistors and memory modules to printed circuit boards. The most common technologies used to attach components to printed circuit boards employ surface mount technology (SMT) and pin-through-hole assembly (PTH). SMT involves the use of an automated assembly system to place and solder components to the printed circuit board. In PTH, components are placed on the printed circuit board by insertion into holes punched in the circuit board. Components also may be attached using press-fit technology in which components are pressed into connectors affixed to the printed circuit board. We use SMT, PTH, press-fit as well as new attachment technologies that are focused on miniaturization and increasing the density of component placement on printed circuit boards. These technologies, which support the needs of our OEM customers to provide greater functionality in smaller products, include chip-scale packaging, ball grid array, direct chip attach and high density interconnect. We perform in-circuit and functional testing of printed circuit board assemblies. In-circuit testing verifies that all components have been properly inserted and attached and that the electrical circuits are complete. We perform functional tests to confirm that the board or assembly operates in accordance with its final design and manufacturing specifications. We either design and procure test fixtures and develop our own test software, or we use our customers' test fixtures and test software. In addition, we provide environmental stress tests of the board or assembly that are designed to confirm that the board or assembly will meet the environmental stresses, such as heat, to which it will be subject.
Optical and RF and Components and Modules. Optical and Radio frequency (RF) components are the key building blocks of many systems and we produce both passive and active components as well as modules. RF and Optical modules are integrated subsystems that use a combination of industry standard and/or custom components, typically interconnected using microelectronic technologies, to achieve unique function. Based on our microelectronic design and manufacturing technologies, we provide RF and optical components, modules and systems for customers in the telecommunications, networking, medical, industrial, military and aerospace markets. Our experience in RF and optical communications and networking products spans long haul/ultra long haul and metro regions for transport/transmission, as well as access and
switching applications, including last mile solutions. In the Medical market, we have developed and manufacture optically based products such as blood analyzers and food contamination analyses. We are currently supplying product to the 10G, 40G and 100G optical marketplace based on our optical and RF technologies. Our service offerings for optical customers are designed to deliver end-to-end solutions with special focus on product design and industrialization, optical and RF component, module and blade manufacturing, as well as system integration and test.
Final System Assembly and Test. We provide final system assembly and test in which assemblies and modules are combined to form complete, finished products. We often integrate printed circuit board assemblies manufactured by us with enclosures, cables and memory modules that we also produce. Our final assembly activities also may involve integrating components and modules that others manufacture. The complex, finished products that we produce typically require extensive test protocols. Our test services include both functional and environmental tests. We also test products for conformity to applicable industry, product integrity and regulatory standards. Our test engineering expertise enables us to design functional test processes that assess critical performance elements including hardware, software and reliability. By incorporating rigorous test processes into the manufacturing process, we can help assure our customers that their products will function as designed. Products for which we currently provide final system assembly and test include wireless base stations, wireline communications switches, optical networking products, high-end servers, industrial and automotive, LED lighting fixtures, multimedia devices, diagnostic medical equipment, internet-protocol communication systems, video on demand and computing servers.
Direct Order Fulfillment. We provide direct order fulfillment for our OEM customers. Direct order fulfillment involves receiving customer orders, configuring products to quickly fill the orders and delivering the products either to the OEM, a distribution channel, such as a retail outlet, or directly to the end customer. We manage our direct order fulfillment processes using a core set of common systems and processes that receive order information from the customer and provide comprehensive supply chain management including procurement and production planning. These systems and processes enable us to process orders for multiple system configurations and varying production quantities including single units. Our direct order fulfillment services include BTO and CTO capabilities. BTO involves building a system having the particular configuration ordered by the OEM customer. CTO involves configuring systems to an end customer's order. The end customer typically places this order by choosing from a variety of possible system configurations and options. We are capable of meeting a 48 to 72 hour turn-around-time for BTO and CTO by using advanced manufacturing processes and a real-time warehouse management and data control system on the manufacturing floor. We support our direct order fulfillment services with logistics that include delivery of parts and assemblies to the final assembly site, distribution and shipment of finished systems and processing of customer returns. Our systems are sufficiently flexible to support direct order fulfillment for a variety of different products, such as servers, workstations, set-top boxes and medical devices.
Components, Products and Services includes:
Product Design and Engineering. Our design and engineering groups provide customers with design and engineering services from initial product design and detailed product development to production launch and end of life support for a wide range of products covering all our market segments. These groups complement our vertically integrated manufacturing capabilities by providing manufacturing design services for printed circuit boards, backplanes and a variety of electro-mechanical systems. Our offerings in design engineering include product architecture, development, integration and regulatory and qualification services, while our NPI services include quick-turn prototype, functional test development and release to volume production. We specialize in creating custom high performance, manufacturable, cost-optimized products. We can also complement our customer's design team with our unique skills and services. Both solutions will accelerate our customer's market penetration - all while respecting the customer's intellectual property (IP).
Printed Circuit Boards. We have the ability to produce multilayer printed circuit boards on a global basis with high layer counts and fine line circuitry. Our ability to support NPI and quick turn fabrication followed by manufacturing in both North America and Asia allows our customers to accelerate their time to market as well as their time to volume. Standardized processes and procedures make transitioning of products easier for our customers. Our technology roadmaps provide leading-edge capabilities and higher yielding processes. Engineering teams are available on a world-wide basis to support designers in DFM analysis and assemblers with field application support.
Printed circuit boards are made of fiberglass/resin laminated material layers and contain copper circuits which interconnect and transmit electrical signals among the components that make up electronic devices. Increasing the density of the circuitry in each layer is accomplished by reducing the width of the circuit tracks and placing them closer together in the printed circuit board along with adding layers and via hole structures. We are currently capable of efficiently producing printed circuit boards with up to 60 layers and circuit track widths as narrow as two mils (50 micron) in
production volumes. Specialized production equipment along with an in-depth understanding of high performance laminate materials allow for fabrication of some of the largest form factor and highest speed (in excess of 20 gigabits per second, or Gbps) backplanes available in the industry. We have also developed several proprietary technologies and processes which improve electrical performance, connection densities and reliability of printed circuit boards. Some of these technologies, such as Buried Capacitance™, have become industry standards and are licensed to other board fabricators.
Backplanes and Backplane Assemblies. Backplanes are very large printed circuit boards that serve as the backbones of sophisticated electronics products and provide interconnections for printed circuit boards, integrated circuits and other electronic components. We fabricate backplanes in our printed circuit board plants. Backplane fabrication is significantly more complex than printed circuit board fabrication due to the large size and thickness of the backplanes. We manufacture backplane assemblies by press fitting high density connectors into plated through holes in the bare backplane. In addition, many of the newer higher technology backplanes require SMT attachment of passive discrete components as well as high pin count ball grid array packages. These advanced assembly processes require specialized equipment and a strong focus on quality and process control. We also perform in-circuit and functional tests on backplane assemblies. We have developed proprietary technology and “know-how” which enables backplanes to run at data rates in excess of 10 Gbps. We currently have capabilities to manufacture backplanes with up to 60 layers in sizes of 26x40 or 22x52 inches and up to 0.500 inches in thickness, utilizing a wide variety of high performance laminate materials. These are among the largest and most complex commercially manufactured backplanes and we are one of a limited number of manufacturers with these capabilities.
Cable Assemblies. Cable assemblies are used to connect modules, assemblies and subassemblies in electronic devices. We provide a broad range of cable assembly products and services. We design and manufacture a broad range of high-speed data, radio frequency and fiber optic cabling products. Cable assemblies that we manufacture are often used in large rack systems to interconnect subsystems and modules.
Mechanical Systems. Mechanical systems are used across all major markets to house and protect complex and fragile electronic components, modules and sub-systems, so that the system's functional performance is not compromised due to mechanical, environmental or any other usage conditions. Our mechanical systems manufacturing services are capable of fabricating mechanical components, such as cabinets, chassis (soft tool, hard progressive tools), frames, racks, and data centers integrated with various electronic components and sub-systems for power management, thermal management, sensing functions, and control systems.
We manufacture a broad range of enclosures from basic enclosures for low end accessories, setup boxes, storages & servers, to large and highly complex mechanical systems, such as those used in indoor and outdoor wireless base station products, and high precision chambers for semiconductor industry.
We serve a variety of market segments, such as telecommunications, computing, semiconductor, industrial, alternative energy, and medical, while partnering with customers from initial concept development, prototyping, builds verification and validation, through integration and system assembly, final test and service.
Our mechanical systems expertise is readily accessible at any of our state-of-the-art facilities worldwide that provide metal fabrication by soft tools, high-volume metal stamping & forging by hard tools with stage & progressive tools, plastic injection molding, aluminum die-casting, robotic welding capabilities, powder painting, wet painting, plating, cleaning processes, and leading precision machining capabilities.
As part of our mission to provide complete manufacturing solutions to customers, we offer a suite of world-class precision machining services in the U.S. and China. We utilize advanced numerically controlled machines enabling the manufacture of components to very tight tolerances and the assembly of these components in clean environments. Capabilities include expertise in complex medium- and large-format mill and lathe machining of aluminum, stainless steel, plastics, ferrous and nonferrous alloys, and exotic alloys. We also have helium and hydrostatic leak-test capabilities. By leveraging our established supply chain, we do lapping, plating, anodizing, electrical discharge machining (EDM), heat-treating, cleaning, laser inspection, painting and packaging. We have dedicated facilities supporting machining and complex integration with access to a suite of state-of-the-art, computer-controlled machining equipment that can satisfy the most rigorous demands for production and quality. This equipment includes fully automated “lights-out” machinery that continues production in the absence of human operators. With some of the largest horizontal milling machines in the United States, we are a supplier of vacuum chamber systems for the semiconductor, flat panel display, and LED equipment markets; and for Industrial and Aerospace (AS0100 certified) markets.
Viking Technology. Viking Technology is a leading designer in Non-Volatile memory, DRAM and SSD technologies and takes a different approach to the integration of SSDs and memory into data centers. With a breadth of solutions that bridge both SSD and DRAM, Viking Technology has the ability to deliver any storage solution from high-performance computing SSDs down to embedded kiosk flash devices. Viking Technology has over two decades of focused DRAM and storage development, delivering high technology solutions that optimize the value and performance of customers' applications in the Enterprise, Network Infrastructure, Embedded, and Defense & Aerospace markets.
In recent years, Viking Technology has pioneered several disruptive technologies that are paving the way for faster and more effective enterprise server and storage system solutions. Such innovations include a new storage-class memory module, ArxCis-NV™. The ArxCis-NV™, an NV-DIMM, enables significant performance improvements to a host of end applications, while delivering increased endurance to any SSD. With ArxCis-NV's latest DDR3 generation, enterprise systems are able to save and restore critical data that resides in main memory during a disastrous power-fail. This ability is critical for the evolving Cloud and Virtualization market to ensure reliability and disaster recovery. Another disruptive technology is the innovative SATADIMM™, an SSD in the form of a DIMM. Utilizing Viking Technology's state-of-the-art design and packaging technology, the SATADIMM™ is able to deliver all the performance, capacity, and features of an Enterprise SSD within 75% the footprint of a traditional 2.5-inch SSD. With its innovative form factor, the SATADIMM™ is capable of enabling a single server to deliver the performance of a full Rack within a single Rack Unit (1U).
SCI Technology - Defense & Aerospace (DAS). SCI Technology has been providing engineering services, products and manufacturing solutions to the global defense and aerospace industry for more than five decades. SCI Technology provides mission-critical products for aircraft systems, tactical communications, and radiation detection and monitoring, as well as fiber optics capabilities for use in a variety of military applications.
Our customers include U.S. government agencies, U.S. allies and major defense and aerospace prime contractors, and we have the infrastructure to support the stringent certifications, regulations, processes and procedures required by these customers.
Newisys. Our Newisys group designs and manufactures both standard and custom storage and server products including mass storage for high performance Cloud and Streaming Video applications, as well as Bulk and Backup Storage products. Newisys designs and produces storage and server products, including complete rack scale solutions.
Logistics and Repair Services. Our logistics and repair services provide significant value to our customers while helping protect their brand name and improving their customer experience through the deployment of enhanced tools and the provision of real-time access to critical business information. Our solutions are designed to reduce the total cost of ownership and enable our customers to shift their services operations to a variable cost model that frees up cash to allow them to focus on their core business initiatives.
Focusing on highly complex and mission-critical products and processes, we support the logistics and repair needs of customers in the Medical, Communications, Enterprise Computing, Aerospace & Defense and Multimedia markets worldwide. Through our operational infrastructure of more than 20 sites, we provide a wide range of services including direct order fulfillment, configure to order, supplier, inventory and warranty management, reverse logistics, repair, asset recovery, sustaining engineering, test development and end of life management to embrace the most unique needs of our customers today.
Drawing on a robust set of information systems, we offer configurable environments tailored to meet specific customer needs including customized web portals, order and serial number tracking, special routings and promotions. Local, regional and global solutions are supported by a robust set of business processes that focus on inventory reduction and risk mitigation that can improve cycle times by leveraging infrastructure, people and technology to enable reliable shipments of product to end users worldwide generally within 4 to 72 hours, depending on the services offered.
Logistics and repair services complement our end-to-end manufacturing strategy by integrating engineering, supply chain, manufacturing, logistics and repairs into a seamless solution for mission-critical customers around the world.
Our End Markets
We have targeted markets that we believe offer significant growth opportunities and for which OEMs sell complex products that are subject to rapid technological change. We believe that markets involving complex, rapidly changing products offer us opportunities to produce products with higher margins because these products require higher value-added
manufacturing services and may also include our advanced vertically integrated components. Our approach to our target markets is two-fold; we intend to strengthen our significant presence in the communications networks and computing and storage markets, while also focusing on other under-penetrated target markets, including the medical, automotive, industrial and semiconductor capital equipment, defense and aerospace, and CleanTech industries, many of which have not extensively relied upon EMS companies in the past. Our diversification across market segments and customers helps mitigate our dependence on any particular market.
Communications Networks: Wireless and Wireline Access, Optical and Wireline Routing, Switching, and Transmission and Enterprise Networking. In the communications sector, we focus on infrastructure equipment. This includes wireless and wireline access, filters, switching, routing and transmission systems, optical networking and transmission and enterprise networking systems. Our product design and engineering staff has extensive experience designing and industrializing advanced communications products and components for these markets. Products we manufacture include point-to-point microwave systems, wireless base stations, remote radio heads, satellite receivers and various radio frequency appliances, optical switches and transmission hardware and wireline access equipment as well as switches and routers among others. We also design and manufacture optical, RF and microelectronic components which are enabling devices in many of these products.
Computing and Storage. We provide CTO and BTO services to the computing and storage market. We tightly couple our vertically integrated supply chain with manufacturing and logistics allowing for assembly and distribution of products to be completed more quickly with high quality standards and at low cost. Our vertical integration capabilities include racks, enclosures, cables, complex multi-layer printed circuit boards, printed circuit assemblies and backplanes. In addition, we have designed and developed some of the most compact and powerful storage modules available on the market today which we have coupled with our global, vertically integrated supply chain and manufacturing capabilities to deliver true end-to-end, no touch, cost-effective EMS solutions to the data storage industry.
Multimedia. We manufacture digital set-top boxes, point of sale equipment, digital home gateways, professional audio-video equipment and internet protocol entertainment devices. For our multimedia OEM customers, we manage the production process for multimedia products including product design and engineering, test development, supply chain management, manufacturing of printed circuit boards and assemblies, final system assembly and test, direct order fulfillment including our BTO and CTO capabilities, and repair services.
Industrial and Semiconductor Systems. Our expertise in manufacturing highly complex systems includes production of industrial and semiconductor capital equipment, front-end environmental chambers, computer controllers and test, inspection, and public safety equipment. We also have significant experience in manufacturing highly complex systems such as process chambers, photolithography tools, etch tools, wafer handling interfaces, flat panel display test and repair equipment, chem-mech planarization tools, optical inspection and x-ray equipment, explosive detection equipment, and large format printing plate machines as well as full design and manufacturing capabilities on precision frames for all capital equipments.
Defense and Aerospace. We offer our end-to-end services to the defense and aerospace industry. Although the overall defense market may decline over the next few years, we believe this industry currently represents a growth opportunity for us due in part to the growing desire of defense and aerospace OEMs to outsource certain manufacturing activities in order to reduce costs. We believe our experience in serving the defense and aerospace industry, as well as our product design and engineering capabilities, represent key competitive strengths for us. Defense and aerospace products that we design and manufacture include avionics systems and processors, cockpit and wireless communications systems, tactical and secure network communications systems, radar subsystems, radiation detection systems for homeland defense and fiber-optic systems.
Medical. We provide comprehensive manufacturing and related services to the medical industry including design, logistics and regulatory approval support. The manufacturing of products for the medical industry often requires compliance with domestic and foreign regulations including the Food and Drug Administration's (FDA's) quality system regulations and the European Union's medical device directive. In addition to complying with these standards, our medical manufacturing facilities comply with ISO 13485-2003 (formerly EN 46002) and ISO 9001:2000. We manufacture a broad range of medical systems including blood glucose meters, computed tomography scanner assemblies, respiration systems, blood analyzers, cosmetic surgery systems, ultrasound imaging systems and a variety of patient monitoring equipment.
Clean Technology. We are committed to serving companies leading the clean technology, or CleanTech, revolution in the solar, wind, fuel cell, battery systems, LED lighting and smart infrastructure industries. We leverage traditional electronics manufacturing services (EMS) for clean technology customers in areas related to power electronics, control and distribution, smart meters and full-system integration. Beyond traditional EMS, our extensive range of electro-mechanical design and
complex system manufacturing capabilities are an excellent fit across all CleanTech segments. Our manufacturing operations are strategically located in close proximity to CleanTech “hot spots”.
Automotive. In the automotive industry, we manufacture different types of sensors, body controllers, engine control units, radios, heating ventilation and air-conditioning (HVAC) control heads and blower modules as well as cables for entertainment solutions. We also provide design support, product and process qualification, manufacturing, supply chain management, supplier quality assurance and end-of-life services. All our automotive dedicated factories are TS 16949 certified and provide printed circuit boards, printed circuit board assemblies and cables as well as final systems.
Customers
A relatively small number of customers have historically generated a significant portion of our net sales. Sales to our ten largest customers represented approximately 50% of our net sales for 2012, 2011 and 2010, respectively. For 2012, one customer, Alcatel-Lucent, represented 10% or more of our net sales. For 2011 and 2010, a single customer represented more than 10% of our net sales in each year.
We seek to establish and maintain long-term relationships with our customers and have served many of our principal customers for several years. Historically, we have had substantial recurring sales from existing customers. We have also expanded our customer base through our marketing and sales efforts as well as acquisitions. We have been successful in broadening relationships with customers by providing vertically integrated products and services as well as multiple products and services in multiple locations.
We typically enter into supply agreements with our major OEM customers with terms ranging from three to five years. Our supply agreements with our OEM customers generally do not obligate the customer to purchase minimum quantities of products. However, the customer typically remains liable for the cost of the materials and components that we have ordered to meet the customer's production forecast but which are not used, provided that the material was ordered in accordance with an agreed-upon procurement plan. In some cases, the procurement plan contains provisions regarding the types of materials for which our customers will assume responsibility. Our supply agreements typically contain provisions permitting cancellation and rescheduling of orders upon notice and subject, in some cases, to cancellation and rescheduling charges. Order cancellation charges typically vary by product type and depend upon how far in advance of shipment a customer notifies us of the cancellation of an order. In some circumstances, our supply agreements with customers provide for cost reduction objectives during the term of the agreement.
We generally do not obtain firm, long-term commitments from our customers under supply agreements. As a result, customers can cancel their orders, change production quantities or delay orders. Uncertain economic conditions and our general lack of long-term purchase contracts with our customers make it difficult for us to accurately predict revenue over the long-term. Even in those cases in which customers are contractually obligated to purchase products from us or repurchase unused inventory from us that we have ordered for them, we may elect not to immediately enforce our contractual rights because of the long-term nature of our customer relationships or for other business reasons and may instead negotiate accommodations with customers regarding particular situations.
Seasonality
Seasonality in our business has historically been driven by customer and product mix, particularly the end markets which our customers serve. Although we have in the past experienced higher levels of sales during our first fiscal quarter, this pattern has not repeated itself every year. The extent to which our business will become more seasonal in the future depends upon our future customer base and the end markets that they serve, which we are unable to predict.
Backlog
We generally do not obtain firm, long-term commitments from our customers. Instead, our procurement of inventory and our manufacturing activities are based primarily on forecasts provided by our customers. This enables us to minimize the time lapse between receipt of a customer's order and delivery of product to the customer. Customers typically do not make firm orders for the delivery of products more than thirty to ninety days in advance. Additionally, customers may cancel or postpone scheduled deliveries, generally without significant penalty. Therefore, we do not believe that the backlog of expected product sales covered by firm orders is a meaningful measure of future sales.
Marketing and Sales
Our sales efforts are organized and managed on a regional basis with regional sales managers in geographic regions in the United States and internationally.
We develop relationships with our customers and market our vertically integrated manufacturing solutions through our direct sales force, customer support specialists and representative firms. Our sales resources are directed at multiple management and staff levels within target accounts. Our direct sales personnel and representative firms work closely with the customers' engineering and technical personnel to better understand their requirements. Our marketing and sales staff supports our business strategy of providing end-to-end solutions by encouraging cross-selling of vertically integrated manufacturing solutions and component manufacturing across a broad range of major OEM products. To achieve this objective, our marketing and sales staff works closely with our various manufacturing and design and engineering groups and engages in marketing and sales activities targeted towards key customer opportunities.
Each of our key customer accounts is managed by a dedicated account team including a global business manager directly responsible for account management. Global business managers coordinate activities across divisions to effectively satisfy customer requirements and have direct access to our senior management to quickly address customer concerns. Local customer account teams further support the global teams and are linked by a comprehensive communications and information management infrastructure.
Business Segment Data and our Foreign Operations
We have one reportable segment in 2012 - Integrated Manufacturing Solutions (IMS). Financial information for segments can be found in note 16 to our consolidated financial statements. Information concerning revenues, results of operations and revenues by geographic area is set forth in Item 7, “Management's Discussion and Analysis of Financial Condition and Results of Operations” and in Note 16, “Business Segment, Geographic and Customer Information”, to our consolidated financial statements. Risks attendant to our foreign operations can be found in Item 1A. “Risk Factors.”.
Competition
For our integrated manufacturing solutions business, we face competition from other major global EMS companies such as Benchmark Electronics, Inc., Celestica, Inc., Flextronics International Ltd., Jabil Circuits, Inc. and Plexus Corp. Our components, products and services business faces competition from EMS and non-EMS companies that often have a regional product, service or industry specific focus. In addition, our potential customers may also compare the benefits of outsourcing their manufacturing to us with the merits of manufacturing products themselves.
We compete with different companies depending on the type of solution or geographic area. We believe the primary competitive factors in our industry include manufacturing technology, quality, delivery, responsiveness, provision of value-added solutions and price. We believe our primary competitive strengths include our ability to provide global end-to-end solutions, our product design and engineering resources, our advanced technologies, our vertically integrated manufacturing solutions, our high quality manufacturing assembly and test solutions, our customer focus and responsiveness, our expertise in serving diverse end markets, our robust IT solution and our experienced management team.
Intellectual Property
We hold various United States and foreign patents primarily related to printed circuit board technologies, methods of manufacturing printed circuit boards, enclosures, memory modules and enterprise computing (servers and storage). For other proprietary processes, we rely primarily on trade secret protection. We also have registered trademarks in the United States and certain other countries. A number of our patents covering certain aspects of our manufacturing processes or products have expired or will expire in the near future. Such expirations reduce our ability to assert claims against competitors or others who use similar technology.
Environmental Matters
We are subject to a variety of local, state and federal environmental laws and regulations in the United States, as well as foreign laws and regulations relating to the treatment, storage, use, discharge, emission and disposal of chemicals, solid waste and other hazardous materials used during our manufacturing processes. We are also subject to occupational safety and health laws, product labeling and product content requirements, either directly or as required by our customers. Proper waste disposal is a major consideration in particular for printed circuit board manufacturers because of the metals and chemicals used in the manufacturing process. Water used in the printed circuit board manufacturing process must be treated to remove metal particles and other contaminants before it can be discharged into municipal sanitary sewer systems. We operate on-site
wastewater treatment systems at our printed circuit board manufacturing plants in order to treat wastewater generated in the fabrication process.
In addition, although the electronics assembly process generates significantly less wastewater than printed circuit board fabrication, maintenance of environmental controls is also important in the electronics assembly process because such operations can generate lead dust. Upon vacating a facility, we are responsible for remediating the lead dust from the interior of the manufacturing facility. Although there are no applicable standards for lead dust remediation in manufacturing facilities, we endeavor to make efforts to remove the residues. To date, lead dust remediation costs have not been material to our operations. We also monitor for airborne concentrations of lead in our buildings and are not aware of any significant lead concentrations in excess of the applicable OSHA or other local standards.
We have a range of corporate programs in place with regard to environmental compliance and reduction of the use of hazardous materials in manufacturing. In the environmental compliance area, we have developed corporate-wide standardized environmental management systems, auditing programs and policies to enable us to better manage environmental compliance activities. Our facilities are also certified under ISO 14001, a set of standards and procedures relating to environmental compliance management. In addition, the electronics industry is subject to the European Union's Restrictions of Hazardous Substances, or RoHS, and Waste Electrical and Electronic Equipment, or WEEE, directives which took effect beginning in July 2006. Parallel initiatives have been adopted in other jurisdictions, including several states in the United States and the Peoples' Republic of China. RoHS limits the use of lead, mercury and certain other specified substances in electronics products and WEEE requires producers to assume responsibility for the collection, recycling and management of waste electronic products and components. We have implemented procedures intended to make our manufacturing process compliant with RoHS and the European Union's Registration, Evaluation and Authorization of Chemicals (REACH) legislation, when required. In the case of WEEE, the compliance responsibility rests primarily with OEMs rather than with EMS companies.
Asbestos containing materials, or ACM, are present at several of our manufacturing facilities. Although the ACM is being managed and controls have been put in place pursuant to ACM operations and maintenance plans, the presence of ACM could give rise to remediation obligations and other liabilities.
Our plants generally operate under environmental permits issued by governmental authorities. For the most part, these permits must be renewed periodically and are subject to revocation in the event of violations of environmental laws. Any such revocation could require us to cease or limit production at one or more of our facilities, thereby having an adverse impact on our results of operations.
Primarily as a result of certain of our acquisitions, we have incurred liabilities associated with environmental contamination. These liabilities include ongoing investigation and remediation activities at a number of current and former sites, including Irvine, California; Owego, New York; Derry, New Hampshire; Fort Lauderdale, Florida; and Brockville, Ontario. In addition, we have been named in a lawsuit alleging operations at our current and former facilities in Orange County, California contributed to groundwater contamination. There are some sites, including our acquired facility in Gunzenhausen, Germany, that are known to have groundwater contamination caused by a third-party, and that third-party has provided indemnity to us for the liability. Third party indemnities may not be effective to reduce our liability for environmental contamination. For example, Nortel Networks, which had provided us an indemnity with respect to environmental investigation activities being undertaken at our former Brockville site, is party to bankruptcy proceedings that may cause it not to fully honor its indemnification obligations to us. The time required to perform environmental remediation can be lengthy and there can be no assurance that the scope of these activities will not increase as a result of the discovery of new contamination or contamination on adjoining landowner's properties or the adoption of more stringent regulatory standards covering sites at which we are currently performing remediation activities. As a result there can be no assurance that these or any other similar third-party or governmental claims that may be filed in the future will not result in material liability to us.
We have also been named as a potentially responsible party at a contaminated disposal site operated by another party at the Casmalia Resources disposal site in Southern California as a result of the past disposal of hazardous waste by companies we have acquired or by our corporate predecessors. In addition, we have been named as a potentially responsible party by the California Department of Toxic Substance Control at a waste treatment site operated by another party in San Jose, California, allegedly as a result of waste we sent to be treated at that facility being discharged into the environment. Although liabilities for such historic disposal activities have not materially affected our financial condition to date, we cannot assure you that past disposal activities will not result in liability that will materially affect us in the future, nor can we provide assurance that we do not have environmental exposures of which we are unaware and which could adversely affect our operating results.
We use environmental consultants primarily for risk assessments and remediation, including remedial investigation and feasibility studies, remedial action planning and design, and site remediation. These consultants provide information to us
regarding the nature and extent of site contamination, acceptable remediation alternatives, and estimated costs associated with each remediation alternative. This information is considered by us, together with other information, when determining the appropriate amount to accrue for environmental liabilities.
Employees
As of September 29, 2012, we had 44,879 employees, including 8,733 temporary employees. None of our U.S. employees are represented by a labor union. In some international locations, our employees are represented by labor unions on either a national or plant level or are subject to collective bargaining agreements. Some foreign countries also have mandatory legal provisions regarding terms of employment, severance compensation and other conditions of employment that are more restrictive than U.S. laws. We believe our relationship with our employees is good.
Available Information
Our Internet address is http://www.sanmina-sci.com. We make available through our website, free of charge, our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission, or SEC. All reports we file with the SEC are also available free of charge via EDGAR through the SEC's website at http://www.sec.gov .
EXECUTIVE OFFICERS OF THE REGISTRANT
The following table sets forth the name, position and age of our current executive officers and their ages as of September 29, 2012.
|
| | |
Name | Age | Position |
Jure Sola | 61 | Chairman of the Board and Chief Executive Officer |
Robert Eulau | 50 | Executive Vice President and Chief Financial Officer |
Michael Tyler | 56 | Executive Vice President, General Counsel and Corporate Secretary |
Dennis Young | 61 | Executive Vice President of Worldwide Sales and Marketing |
Jure Sola has served as our Chief Executive Officer since April 1991, as Chairman of our Board of Directors from April 1991 to December 2001 and from December 2002 to present, and as Co-Chairman of our Board of Directors from December 2001 to December 2002. In 1980, Mr. Sola co-founded Sanmina and initially held the position of Vice President of Sales. In October 1987, he became our Vice President and General Manager, responsible for manufacturing operations and sales and marketing and was President from October 1989 to March 1996.
Robert Eulau has served as our Executive Vice President and Chief Financial Officer since September 2009. Prior to joining us, he served as Executive Vice President, Chief Operating Officer and Chief Financial Officer of privately-owned Alien Technology Corporation, a developer of radio frequency identification products, from March 2006 through June 2008. Previously, he was Senior Vice President and Chief Financial Officer of publicly-traded Rambus Inc., a technology licensing company, from May 2001 through March 2006. Prior to Rambus, Mr. Eulau served over 15 years with Hewlett Packard Company in various leadership roles, including Vice President and Chief Financial Officer of HP's Business Customer Organization, and Vice President and Chief Financial Officer of HP's Computing Products business.
Michael Tyler has served as our Executive Vice President and General Counsel since April 2007. Mr. Tyler became our Corporate Secretary in June 2007. Prior to joining us, he was Senior Vice President, Chief Legal and Administrative Officer of Gateway, Inc., a major personal computer manufacturer, where he was employed from 2000 to 2007. Prior to that, he served as Senior Corporate Counsel International at Northrop Grumman Corporation from 1995 to 2000, as an associate at the law firm Heller, Ehrman, White & McAuliffe from 1991 to 1995, and as a law clerk for the United States Court of Appeals for the Ninth Circuit from 1987 to 1988.
Dennis Young has served as Executive Vice President of Worldwide Sales and Marketing since March 2003. Prior to joining us, Mr. Young was Senior Vice President of Sales from May 2002 to March 2003 and Vice President of Sales from March 1998 to May 2002 of Pioneer-Standard Electronics, a provider of industrial and consumer electronic products.
Item 1A. Risk Factors
Adverse market conditions in the electronics industry could reduce our future sales and earnings per share.
We cannot accurately predict future levels of demand for our customers' electronics products. Consequently, our past operating results, earnings and cash flows may not be indicative of our future operating results, earnings and cash flows. Beginning in the fourth quarter of calendar 2011 and continuing through 2012, adverse worldwide economic conditions led to challenging conditions in the electronics industry. A number of factors, including price instability, the availability and cost of credit, high global unemployment and concerns about the stability and solvency of financial institutions, financial markets, businesses, and sovereign nations have slowed global economic growth in many countries. These conditions resulted in our customers delaying purchases or placing purchase orders for lower volumes of products than previously experienced or anticipated. Such conditions could also cause a reduction in orders from our customers or potential customers due to a reduced availability of credit and the insolvency of one or more customers or suppliers. Any of these factors could reduce our revenues, increase our costs and decrease our liquidity.
We may experience component shortages or price increases, which could cause us to delay shipments to customers and reduce our sales and net income.
We are dependent on certain suppliers, including limited and sole source suppliers, to provide key components we incorporate into our products. We have experienced, and may experience in the future, delays in delivery and shortages of components, which in turn could cause delays in product shipments to customers, result in reduced revenue from and have an adverse effect on our relationship with affected customers, and our reputation generally as a reliable service provider. Component shortages can result in increased component prices which would result in decreased gross profit. Component delays and shortages can also result from natural disasters occurring in the regions in which our suppliers operate, such as the March 2011 earthquake in Japan and the widespread flooding in Thailand during late 2011. We may purchase components in advance of our requirements for such components as a result of a threatened or anticipated shortage. In this event, we may incur additional inventory carrying costs and have a heightened risk of exposure to inventory obsolescence, the cost of either of which may not be recoverable from our customers. Such costs would reduce our margins and net income. Finally, if key components become scarce, we may be required to look to second tier vendors or to procure components through brokers. Such components may be of lesser quality than those otherwise available and could cause us to incur costs to qualify such components or to replace them if they prove to be defective.
Our customers could experience credit problems, which would reduce our future revenues and net income.
Many of the industries for which we provide products have previously experienced significant financial difficulty, with some of the participants filing for bankruptcy. Such financial difficulty, if experienced by one or more of our customers, may negatively affect our business due to the decreased demand from these financially distressed customers, the lengthening of customer payment terms, the potential inability of these companies to make full payment on amounts owed to us or to purchase inventory we acquired to support their businesses, or any of these factors. Customer bankruptcies also entail the risk of potential recovery by the bankruptcy estate of amounts previously paid to us that are deemed a preference under bankruptcy laws. We do not carry insurance against the risk of customer default on their payment obligations to us.
We seek to mitigate the impact of collection problems with our customers on our financial results by evaluating their creditworthiness on an ongoing basis and by maintaining an allowance for doubtful accounts that is assessed for adequacy quarterly. However, should customer defaults increase substantially or exceed the level of our allowance, our revenue, net income and cash position would be reduced, perhaps significantly.
Our cash generated from operations is variable, which can adversely affect our ability to plan and invest in the business.
Our ability to make capital expenditures and pay down debt and the extent to which we need to utilize our borrowing facilities depends in large part on our ability to generate cash from operations. Cash generated from operations is highly variable. For example, during 2010, we used $78 million of cash in operating activities, in 2011 we generated $235 million in cash from operating activities and in 2012, we generated $215 million of cash from operating activities. Our cash generated by or used in operations is impacted by a number of variables, including our growth and profitability, customer and supplier payment terms, timeliness of customer payments to us and the extent to which we need to increase inventories in response to customer forecasts. To the extent our cash from operations fluctuates significantly in the future, our ability to make investments in our business and reduce our debt could be adversely impacted.
Our strategy to pursue higher margin business depends in part on the success of our Components, Products and Services (CPS) business, which, if not successful, could cause our future gross margins and operating results to be lower.
A key part of our strategy is to grow our CPS business, which includes printed circuit boards; backplane and cable assemblies; mechanical systems; memory, defense and aerospace and enterprise computing products; and design, engineering, logistics and repair services. A decrease in orders for these products and services can have a disproportionate adverse impact on our profitability since these products and services generally carry higher than average contribution margins. In order to grow this portion of our business profitability, we must continue to make substantial investments in the development of our product development capabilities, research and development activities, test and tooling equipment and skilled personnel. The success of our CPS business also depends on both our ability to increase sales of our propriety products, cause our customers to agree to purchase our components for use in the manufacture of their products and expand the number of our customers who contract for our design, engineering, logistics and repair services. We may face challenges in achieving commercially viable yields and difficulties in manufacturing components in the quantities and to the specifications and quality standards demanded by our customers, as well as in qualifying our components for use in our customers' designs. Our proprietary products and design, engineering, logistics and repair services must compete with products and services offered by established vendors which focus solely on development of similar technologies or the provision of similar services. Any of these factors could cause our CPS revenue and margins to be less than expected, which would have an overall adverse and potentially disproportionate effect on our revenues and profitability.
Adverse changes in the key end markets we target could harm our business by reducing our sales.
We provide products and services to companies that serve the communications, industrial, defense, medical, enterprise computing and storage, multimedia, clean technology and automotive industries. Adverse changes in any of these markets could reduce demand for our customers' products or make these customers more sensitive to the cost of our products and services, either of which could reduce our sales, gross margins and net income. A number of factors could affect any of these industries in general, or our customers in particular, and lead to reductions in net sales, thus harming our business. These factors include:
| |
• | short product life cycles of our customers' products leading to continuing new requirements and specifications and product obsolescence, either of which could cause us to lose business; |
| |
• | failure of our customers' products to gain widespread commercial acceptance which could decrease the volume of orders customers place with us; and |
| |
• | recessionary periods in our customers' markets which decrease orders from affected customers. |
We realize a substantial portion of our revenues from communications equipment customers. This market is highly competitive, particularly in the area of price. Should any of our larger customers in this market fail to effectively compete with their competitors, they could reduce their orders to us or experience liquidity difficulties, either of which would have the effect of reducing our revenue and net income, perhaps substantially. In addition, in the case of our defense business, future U.S. government budget conditions and the scheduled withdrawal of armed forces from Afghanistan could result in a decrease in defense spending, which in turn could cause a reduction in orders placed by the government or defense contractors for products manufactured by our defense and aerospace (DAS) division. Since such products carry higher margins than many of our other products and services, such a decrease would contribute disproportionately to a reduction in our gross margin and profitability. For example, an unexpected decline in DAS orders during the second quarter of 2011 contributed to our financial results not meeting analyst expectations in that quarter. There can be no assurance that we will not experience declines in demand for such products in the future.
We may be unable to generate sufficient liquidity to reduce our debt levels or maintain or expand our operations, which may cause our stock price to fall and reduce the business our customers and vendors do with us.
Our liquidity is dependent on profitability and business volume which affects working capital, including inventory requirements, the extension of trade credit by our suppliers, the degree of alignment of payment terms from our suppliers to payment terms granted to our customers, investments in facilities and equipment, acquisitions, repayments of obligations under outstanding indebtedness and repurchases of our outstanding debt. In order to improve our liquidity, during the second quarter of 2012, we renewed and increased our asset-backed credit facility increasing the facility to $300 million, under which we could borrow $232 million based on the levels of eligible receivables and inventories as of September 29, 2012, and in the fourth quarter of 2012, we borrowed $40 million secured by our corporate headquarters. We also have $128 million in short-term financing facilities of which $68 million remained available to be borrowed as of September 29, 2012. Our asset-backed credit facility expires as early as the second quarter of 2014 should the Senior Floating Rate Notes due 2014 not be repaid, redeemed, defeased, refinanced or reserved under the borrowing base, and as late as March 2017. Our next long-term debt
maturity is in 2014. Additionally, $70 million of our foreign short-term credit facilities expires in the third quarter of 2013 and $58 million expires in the fourth quarter of 2013. On July 23, 2012, we redeemed $150 million of notes due in 2016 using cash, borrowings under our credit facilities and the net proceeds from our $40 million loan..
In the event we need additional capital, whether for working capital, debt repayment or otherwise, there can be no assurance that such additional debt or equity capital will be available on acceptable terms or at all. New financing could result in us issuing additional equity securities, which could cause dilution to existing stockholders. If additional or continued financing, including the continued extension of trade credit by our suppliers, is not available when required, our liquidity would be reduced. The risks of reduced liquidity include an inability to maintain or increase our rates of production, to make necessary capital expenditures in order to maintain and expand our manufacturing capacity as needed, and to repay, reduce or refinance our debt. Any of these issues could cause our stock price to fall and reduce our customers' and vendors' willingness to do business with us.
Our credit arrangements contain covenants which may adversely impact our business and the failure to comply with such covenants could cause our outstanding debt to become immediately payable.
Other than our $40 million loan which used certain of our real property as collateral, our debt agreements do not contain financial covenants currently applicable to us, but do include a number of restrictive covenants, including restrictions on incurring additional debt, making investments and other restricted payments, selling assets, paying dividends and redeeming or repurchasing capital stock and debt, subject to certain exceptions. Our $40 million loan requires us to maintain a minimum fixed charge coverage ratio during its term. These covenants could constrain our ability to grow our business through acquisition or engage in other transactions which the covenants would otherwise restrict, including refinancing our existing debt. In addition, such agreements include covenants requiring, among other things, that we file quarterly and annual financial statements with the SEC, comply with all laws, pay all taxes and maintain casualty insurance. If we are not able to comply with all of these covenants, for any reason, some or all of our outstanding debt as well as all amounts payable under our interest rate swaps on such debt, if any, could become immediately due and payable and the incurrence of additional debt under our asset-backed credit facility would not be allowed, any of which could have a material adverse effect on our liquidity and ability to conduct our business.
Early redemptions and repurchases of debt reduce our working capital and liquidity; debt refinancing can entail higher interest expense, which would lower our net income; interest payments on variable rate debt can increase, which would lower our net income.
During 2010, 2011 and 2012, we redeemed $195.7 million, net $80 million and net $360 million of our long-term debt, respectively. Although redemptions and repurchases of debt improve our operating results by reducing our interest expense, these actions also reduce our liquidity. If we should repurchase or redeem additional debt or equity, our working capital and liquidity would be further reduced. In addition, should we undertake to refinance any of our outstanding long-term debt, the next maturity of which is 2014, there can be no assurance that the terms of such refinancing, particularly the interest rate, would be favorable to us. Should we be forced to replace lower interest rate debt with higher interest rate debt, our net income would be reduced. As of September 29, 2012, an aggregate of $540 million of our long-term debt and all of our short-term borrowings bear interest at a variable rate based upon LIBOR. Interest rates, including LIBOR, can change due to a variety of factors, including governmental debt levels, ratings downgrade of U.S. or other sovereign debt, the pace of economic growth and central bank actions. In addition, volatility of LIBOR could increase following recent governmental investigations concerning the manner in which LIBOR rates are determined. Should LIBOR increase substantially in the future for any reason, interest payments on our variable interest rate debt would also increase, lowering our net income.
We are subject to intense competition in the EMS industry which could cause us to lose sales and therefore hurt our financial performance.
The EMS industry is highly competitive and the industry has been experiencing a surplus of manufacturing capacity, particularly in light of the slowdowns in the U.S. and certain international economies. Our competitors include major global electronics manufacturing services (EMS) providers such as Benchmark Electronics, Inc., Celestica, Inc., Flextronics International Ltd., Jabil Circuit, Inc. and Plexus Corp., as well as other EMS companies that have a regional, product, service or industry specific focus. Some of those companies have greater manufacturing and financial resources than we do. We also face competition from current and potential OEM customers who may elect to manufacture their own products internally rather than outsourcing to EMS providers.
We may not be able to offer prices as low as some of our competitors because those competitors may have lower operating costs as a result of their geographic location, greater economies of scale or the services they provide or because these
competitors are willing to provide EMS services at prices we are unable or unwilling to offer. There can be no assurance that we will not lose business in the future in response to such competitive pricing or other inducements which may be offered by our competitors, which would decrease our sales and net income.
If demand for our higher-end, higher margin manufacturing services does not increase, our future gross margins and operating results may be lower than expected.
We typically earn lower gross margins when we provide less complex IMS services. We experience continued pressure from OEMs to reduce prices, and competition remains intense. Pricing pressure is typically more intense for less complex, lower margin IMS services. This price competition has affected, and could continue to adversely affect, our gross margins. If demand for our higher-end, higher margin manufacturing services and products does not increase in the future, our gross margins and operating results in future periods may be lower than expected.
Our operating results are subject to significant uncertainties, which make predictability of our future sales and net income difficult.
Our operating results are subject to significant uncertainties, including:
| |
• | conditions in the economy as a whole and in the electronics industry; |
| |
• | fluctuations in components prices and component shortages caused by high demand, natural disaster or otherwise; |
| |
• | timing of new product development by our customers which creates demand for our services; |
| |
• | levels of demand in the end markets served by our customers; |
| |
• | our ability to replace declining sales from end-of-life programs with new business wins; |
| |
• | timing of orders from customers and the accuracy of their forecasts; |
| |
• | inventory levels of customers, which if high relative to their normal sales volume, could cause them to reduce their orders to us; |
| |
• | timing of expenditures in anticipation of increased sales, customer product delivery requirements and shortages of components or labor; |
| |
• | increased labor costs in the regions in which we operate; |
| |
• | mix of products ordered by and shipped to major customers, as high volume and low complexity manufacturing services typically have lower gross margins than more complex and lower volume services; |
| |
• | degree to which we are able to utilize our available manufacturing capacity; |
| |
• | our ability to maintain desired plant operating efficiencies, including achieving acceptable yields, effectively planning production and managing our inventory and fixed assets to avoid high carrying costs and excess working capital; |
| |
• | customer insolvencies resulting in bad debt or inventory exposures that are in excess of our reserves; |
| |
• | our ability to efficiently move manufacturing activities to lower cost regions without adversely affecting customer relationships while controlling costs related to the closure of facilities and employee severance; |
| |
• | pricing and other competitive pressures; |
| |
• | fluctuations in the values of our assets, including real property and assets held for sale, which could result in charges to income; |
| |
• | volatility of foreign currency exchange rates; |
| |
• | changes in our tax provision due to changes in our estimates of pre-tax income in the jurisdictions in which we operate, including our ability to utilize our deferred tax assets; and |
| |
• | political and economic developments in countries in which we have operations which could restrict our operations or increase our costs. |
If any of these uncertainties should be realized, our financial results could be adversely impacted.
A portion of our operating expenses is relatively fixed in nature and planned expenditures are based in part on anticipated orders, which are difficult to predict. If we do not receive anticipated orders as expected, our profitability will decline. Moreover, our ability to reduce our costs as a result of current or future restructuring efforts may be limited because consolidation of operations can be a costly and lengthy process to complete.
We generally do not obtain long-term volume purchase commitments from customers and, therefore, cancellations, reductions in production quantities, delays in production by our customers and changes in customer requirements could reduce our sales and net income.
We generally do not obtain firm, long-term purchase commitments from our customers and our bookings may generally be canceled prior to the scheduled shipment date. Customers may cancel their orders, reduce production quantities or delay production for a number of reasons, including significant decreases in demand for their products and services. Although the customer is generally liable for finished goods and work-in-process at the time of cancellation, we may be unable or, for other business reasons, choose not to enforce our contractual rights. Cancellations, reductions or delays of orders by customers would:
| |
• | reduce our sales and net income by decreasing the volumes of products that we manufacture for our customers; |
| |
• | delay or eliminate recovery of our expenditures for inventory purchased in preparation for customer orders; and |
| |
• | lower our asset utilization, which would result in lower gross margins and lower net income. |
In addition, customers sometimes require that we transfer the manufacturing of their products from one facility to another to achieve cost reductions and other objectives. These transfers have resulted in increased costs to us due to facility downtime or less than optimal utilization of our manufacturing capacity. These transfers also have required us to close or reduce operations at certain facilities, particularly those in high cost locations such as the United States, Canada and Western Europe, and as a result we have incurred significant costs for the closure of facilities, employee severance and related matters. We also have encountered occasional delays and complications related to the transition of manufacturing programs to new locations. We may be required to relocate our manufacturing operations in the future and, accordingly, we may incur additional costs that decrease our net income.
Commodity price fluctuations may negatively impact our results of operations.
Our components are manufactured using a number of commodities, including petroleum, gold, copper and other metals that are subject to frequent and unpredictable changes in price due to worldwide demand, investor interest and economic conditions. We do not hedge against the risk of these fluctuations, but rather attempt to adjust our product pricing to reflect such changes. Portions of the Dodd-Frank Act, which will require due diligence and disclosure by publicly-traded OEM's and manufacturers of information concerning the source of certain minerals contained in their products, may reduce the acceptable sources of supply of such minerals, which could have the effect of increasing prices for such minerals and the components containing them. Should significant increases in commodities prices occur and should we not be able to increase our product prices enough to offset these increased costs, our gross margins and profitability would decrease, perhaps significantly.
Energy price increases may negatively impact our results of operations.
We, along with our suppliers and customers, rely on various energy sources (including oil) in our manufacturing and transportation activities. There has been significant volatility in the prices of energy during the recent past and such volatility is likely to continue in the future. A sustained increase in energy prices could cause an increase to our raw material, components and transportation costs. We may not be able to increase our product prices enough to offset these increased costs. In addition, any increase in our product prices may reduce our future customer orders and profitability.
We rely on a relatively small number of customers for a substantial portion of our sales, and declines in sales to these customers would reduce our net sales and net income.
One customer represented 10% or more of our net sales and sales to our ten largest customers represented 49.7% of our net sales during 2012. We expect to continue to depend upon a relatively small number of customers for a significant percentage of our sales. A significant reduction in sales to any of our large customers or significant pricing and margin pressures exerted by our large customers would adversely affect our operating results. In the past, some of our large customers have significantly reduced or delayed the volume of manufacturing services ordered from us as a result of changes in demand for their product, consolidations or divestitures or for other reasons. In particular, certain of our customers have from time to time entered into manufacturing divestiture transactions with other EMS companies, and such transactions could reduce our revenues with these customers. We cannot assure you that present or future large customers will not terminate their manufacturing arrangements with us or significantly change, reduce or delay the amount of manufacturing services ordered from us, any of which would reduce our net sales and net income.
We are subject to risks arising from our international operations.
We conduct our international operations primarily in Asia, Latin America, Canada and Europe, and we continue to consider additional opportunities to make foreign acquisitions and construct new foreign facilities. We generated 81.8% of our net sales from non-U.S. operations in 2012 and a significant portion of our manufacturing material was provided by
international suppliers during this period. As a result of our international operations, we are affected by economic, political and other conditions in foreign countries, including:
| |
• | the imposition of government controls; |
| |
• | compliance with U.S. and foreign laws concerning trade and employment practices; |
| |
• | difficulties in obtaining or complying with export license requirements; |
| |
• | labor unrest, including strikes, and difficulties in staffing; |
| |
• | inflexible employee contracts in the event of business downturns; |
| |
• | coordinating communications among and managing international operations; |
| |
• | fluctuations in currency exchange rates; |
| |
• | increases in duty and/or income tax rates; |
| |
• | adverse rulings in regards to tax audits; |
| |
• | excess costs associated with reducing employment or shutting down facilities; |
| |
• | misappropriation of intellectual property; and |
| |
• | constraints on our ability to maintain or increase prices. |
Our operations in certain foreign locations receive favorable income tax treatment in the form of tax holidays or other incentives. In the event that such tax holidays or other incentives are not extended, are repealed, or we no longer qualify for such programs, our taxes may increase, which would reduce our net income.
Additionally, a significant portion of our worldwide cash reserves are generated by, and therefore held in, foreign jurisdictions. Some jurisdictions restrict the amount of cash that can be transferred to the U.S. or impose taxes and penalties on such transfers of cash. To the extent we have excess cash in foreign locations that could be used in, or is needed by, our U.S. operations, we may incur significant taxes to repatriate these funds.
We operate in countries that have experienced labor unrest and political instability, including China, India, Malaysia, Thailand and other countries in Southeast Asia and we have experienced work stoppages and similar disruptions in certain foreign jurisdictions, including India. To the extent such developments prevent us from adequately staffing our plants and manufacturing and shipping products in those jurisdictions, our margins and net income could be reduced and our reputation as a reliable supplier could be negatively impacted.
Failure to comply with domestic or international employment and related laws could result in the payment of significant damages, which would reduce our net income.
We are subject to a variety of domestic and foreign employment laws, including those related to safety, wages and overtime, discrimination, whistle-blowing, classification of employees and severance payments. Enforcement activity relating to these laws, particularly outside of the United States, can increase as a result of increased media attention due to violations by other companies, changes in law, political and other factors. Although we believe that our employment practices comport with local customs, there can be no assurance that, due to a more aggressive enforcement posture by governmental authorities, we won't be found to have violated elements of such laws, which can be complex, in the future. Any such violations could lead to the assessment of fines against us by federal, state or foreign regulatory authorities or damages payable to employees, which could be substantial and would reduce our net income.
Unanticipated changes in our tax rates or exposure to additional income tax liabilities could increase our taxes and decrease our net income.
We are subject to income, sales, value-added and other taxes in the United States and various foreign jurisdictions. Significant judgment is required in determining our worldwide provision for taxes and, in the ordinary course of business, there are many transactions and calculations for which the ultimate tax determination is uncertain. Our effective tax rates could be adversely affected by changes in the mix of earnings in countries with differing statutory tax rates, changes in the valuation of deferred tax assets and liabilities, changes in tax laws and other factors. Our tax determinations are regularly subject to audit by tax authorities and developments in those audits could adversely affect our tax provisions, including through assessment of back taxes, interest and penalties. For example, we are currently undergoing audits of our tax returns for certain recent tax years in a number of jurisdictions, including the U.S. and Mexico. Although we believe that our tax estimates are reasonable and our
existing tax reserves are adequate, the final determination of tax audits or tax disputes may be different from what is reflected in our historical tax provisions which could lead to an increase in our taxes payable and a decrease in our net income.
We have taken substantial restructuring charges in the past and we may need to take material restructuring charges in the future.
We have incurred significant expenses related to restructuring of our operations in the past and may continue to do so in the future. For example, we have moved, and may continue to move, our operations from higher-cost to lower-cost locations to meet customer requirements. We have incurred costs related to workforce reductions, facilities closure and subsequent environmental remediations, work stoppages and labor unrest resulting from the closure of our facilities in higher cost locations. In addition, we have incurred unanticipated costs related to the transfer of operations to lower-cost locations, including costs related to integrating new facilities, managing operations in dispersed locations and realigning our business processes. We also have incurred costs to restructure operations that have been acquired in order to integrate them into our Company. We expect to be required to record additional charges related to restructuring activities in the future, but cannot predict the timing or amount of such charges. Any such charges would reduce our net income.
Our results can be adversely affected by rising labor costs.
There is substantial uncertainty about future labor costs, in particular within the lower-cost regions in which we operate. In the past, labor disputes and strikes based partly on wages have slowed or stopped production at certain manufacturers in China and India. In some cases, employers have responded by significantly increasing the wages of workers at such plants. In addition, the cost structure in certain countries that are now considered to be favorable may increase as economies develop, causing local wages to rise. In addition, demographic and other changes may cause a sustained and permanent increase in wages in the lower-cost geographies in which we operate, particularly in China. If we are required to make any substantial increase in wages that we are unable to recover from our customers, our profitability would be reduced.
As a result of our components ordering policies and customer-requested ship dates, we may incur, and not be able to recover from our customers, the purchase price or carrying costs of components, work-in-process or finished goods kept in our inventory, which would decrease our margins and net income.
In order to satisfy customer orders, we are frequently required to order components and other parts in advance of customer payment, particularly for long lead-time items. Furthermore, we may be required to keep additional components, work-in-process and finished goods in inventory in order to meet customer delivery dates. While our supply agreements with our customers generally allocate most of the liability for payment for such items to the customers, we may nonetheless incur additional carrying costs or not ultimately be compensated for these items should the customer default upon its obligations. To the extent we incur any such costs, our gross margins and net income would be reduced.
If we manufacture or design defective products, or if our manufacturing processes do not comply with applicable statutory and regulatory requirements, we could be subject to claims, damages and fines and lose customers.
We manufacture products to our customers' specifications, and in some cases our manufacturing processes and facilities may need to comply with various statutory and regulatory requirements. For example, many of the medical devices that we manufacture, as well as the facilities and manufacturing processes that we use to produce them must comply with standards established by the United States Food and Drug Administration. In addition, our customers' products and the manufacturing processes that we use to produce them often are highly complex. As a result, products that we design or manufacture may at times contain design or manufacturing defects, and our manufacturing processes may be subject to errors or may not be in compliance with applicable statutory and regulatory requirements. Defects in the products we design or manufacture may result in product recalls, warranty claims by customers, including liability for repair costs, delayed shipments to customers or reduced or canceled customer orders. If these defects or deficiencies are significant, our results of operations and business reputation could be harmed. The failure of the products that we design or manufacture or of our manufacturing processes and facilities to comply with applicable statutory and regulatory requirements may subject us to legal fines or penalties and, in some cases, require us to shut down or incur considerable expense to correct a manufacturing program or facility. In addition, these defects may result in product liability claims against us. The magnitude of such claims may increase as we expand our medical, automotive, and aerospace and defense manufacturing services because defects could result in death or significant injury to end users of these products. Even if our customers are contractually responsible for defects in the design of a product, we could nonetheless be named in a product liability suit over such defects and could be required to expend significant resources defending ourselves.
We design products on a contract basis or jointly with our customers. The design services that we provide can expose us to different or greater potential liabilities than those we face when providing our regular manufacturing services. For example, we have increased exposure to potential product liability claims resulting from injuries caused by defects in products we design, as well as potential claims that products we design infringe third-party intellectual property rights. Such claims could subject us to significant liability for damages and, regardless of their merits, could be time-consuming and expensive to resolve. Any such costs and damages could be significant and would reduce our net income.
Our business could be adversely affected by any delays, or increased costs, resulting from the use of common carriers to transport our materials and, products.
We rely on a variety of common carriers to transport our raw materials and components from our suppliers to us, and to transport our products to our customers. The use of common carriers is subject to a number of risks, including increased costs due to rising energy prices and labor, vehicle and insurance costs, criminal activity, such as hijackings, resulting in losses of shipments, delivery delays resulting from labor disturbances and strikes and other factors beyond our control. While we attempt to mitigate our liability for any losses resulting from these risks through contracts with our customers, suppliers and insurance carriers, any costs or losses that cannot be mitigated could reduce our profitability, require us to manufacture replacement product or damage our relationships with our customers.
Our key personnel are critical to the continued growth of our business and we cannot assure you that they will remain with us.
Our success depends upon the continued service of our key personnel. Generally, these employees are not bound by employment or non-competition agreements. We cannot assure you that we will retain our key employees, particularly our highly skilled operations managers and engineers involved in the manufacture of existing products and development of new products and processes. The competition for these employees is intense. In addition, if one or more of our key employees were to join a competitor or otherwise compete directly or indirectly with us or otherwise become unavailable to us, we could lose customers and our sales and gross margins could decrease.
If we are unable to maintain our technological and manufacturing process expertise, our business could be adversely affected.
Improvements to and refinements of our manufacturing processes are necessary to manufacture next generation products for our customers in a cost-efficient manner. As a result, we are continually evaluating the cost-effectiveness and feasibility of new manufacturing processes. In some cases, we will be required to make capital expenditures and incur engineering expense in order to qualify and validate any such new process. Such expenses would reduce our net income. In addition, any delay in the deployment of such new process, or problems commencing volume production using a new process could also reduce our margins and net income and harm our reputation with our customers.
Our international sales are subject to laws relating to trade, export controls and foreign corrupt practices, the violation of which could adversely affect our operations.
We are required to comply with all applicable domestic and foreign export control laws, including the International Traffic in Arms Regulations (“ITAR”) and the Export Administration Regulations (“EAR”). Some items manufactured by us are controlled for export by the United States Department of Commerce's Bureau of Industry and Security under the EAR. In addition, we are subject to the Foreign Corrupt Practices Act and international counterparts relating to bribery of foreign governments and officials. Violation of any of these laws or regulations could result in significant sanctions, including large monetary penalties and suspension or debarment from participation in future business opportunities, which could reduce our future revenue and net income and damage our reputation as a reputable supplier.
We are subject to a number of U.S. governmental procurement rules and regulations, the failure to comply with which could result in damages or reduction of future revenue.
We are subject to a number of laws and regulations relating to the award, administration and performance of U.S. government contracts and subcontracts. Such laws and regulations govern, among other things, price negotiations, cost accounting standards and other aspects of performance under government contracts. These rules are complex and our performance under them is subject to audit by the Defense Contract Audit Agency and other government regulators. If an audit or investigation reveals a failure to comply with regulations or other improper activities, we may be subject to civil or criminal penalties and administrative sanctions by either the government or the prime customer, including termination of the contract,
payment of fines and suspension or debarment from doing further business with the U.S. government. Any of these actions would increase our expenses, reduce our revenue and damage our reputation as a reliable government supplier.
We can experience losses due to foreign exchange rate fluctuations, which would reduce our net income.
Because we manufacture and sell a substantial portion of our products abroad, our operating costs are subject to fluctuations in foreign currency exchange rates. If the U.S. dollar weakens against the foreign currencies in which we denominate certain of our trade accounts payable, fixed purchase obligations and other expenses, the U.S. dollar equivalent of such expenses would increase. We use financial instruments, primarily short-term foreign currency forward contracts, to hedge certain forecasted foreign currency commitments arising from trade accounts receivable, trade accounts payable and fixed purchase obligations. Our foreign currency hedging activities depend largely upon the accuracy of our forecasts of future sales, expenses, capital expenditures and monetary assets and liabilities. As such, our foreign currency forward contracts may exceed or not cover our full exposure to exchange rate fluctuations. If these hedging activities are not successful, we may experience significant unexpected expenses from fluctuations in exchange rates. Although we believe our foreign exchange hedging policies are reasonable and prudent under the circumstances, we can provide no assurances that we will not experience losses arising from currency fluctuations in the future, which could be significant.
Any failure to comply with applicable environmental laws could adversely affect our business by causing us to pay significant amounts for cleanup of hazardous materials or for damages or fines.
We are subject to various federal, state, local and foreign environmental laws and regulations, including those governing the use, storage, discharge and disposal of hazardous substances and wastes in the ordinary course of our manufacturing operations. We also are subject to laws and regulations governing the recyclability of products, the materials that may be included in products, and the obligations of a manufacturer to dispose of these products after end users have finished using them. If we violate environmental laws or if we occupy or occupied in the past a site at which a predecessor company caused contamination, we may be held liable for damages and the costs of remedial actions. We cannot assure you that we will not violate environmental laws and regulations in the future as a result of human error, equipment failure or other causes. Although we estimate and regularly reassess our potential liability with respect to violations or alleged violations and accrue for such liability, we cannot assure you that our accruals will be sufficient to cover the actual costs we incur as a result of these violations or alleged violations or that no violations will not occur for which a reserve has not been established. Any increase in existing reserves or establishment of new reserves for environmental liability would reduce our net income. Our failure to comply with applicable environmental laws and regulations could also limit our ability to expand facilities or could require us to acquire costly equipment or to incur other significant expenses to comply with these laws and regulations.
Asbestos containing materials, or ACM, are present at several of our manufacturing facilities. Although the ACM is being managed and controls have been put in place pursuant to ACM operations and maintenance plans, the presence of ACM could give rise to remediation obligations and other liabilities.
Our plants generally operate under environmental permits issued by governmental authorities. For the most part, these permits must be renewed periodically and are subject to revocation in the event of violations of environmental laws. Any such revocation could require us to cease or limit production at one or more of our facilities, thereby having an adverse impact on our results of operations.
Primarily as a result of certain of our acquisitions, we have incurred liabilities associated with environmental contamination. These liabilities include ongoing investigation and remediation activities at a number of current and former sites, including ones located in Irvine, California; Owego, New York; Derry, New Hampshire; Fort Lauderdale, Florida; and Brockville, Ontario. In addition, we have been named in a lawsuit alleging operations at our current and former facilities in Orange County, California contributed to groundwater contamination. There are some sites, including our acquired facility in Gunzenhausen, Germany, that are known to have groundwater contamination caused by a third-party, and that third-party has provided indemnity to us for the liability. Third party indemnities may not be effective to reduce our liability for environmental contamination. For example, Nortel Networks, which had provided us an indemnity with respect to environmental investigation activities being undertaken at our former Brockville site, is party to bankruptcy proceedings that may cause it not to fully honor its indemnification obligations to us. The time required to perform environmental remediations can be lengthy and there can be no assurance that the scope of these activities will not increase as a result of the discovery of new contamination or contamination on adjoining landowner's properties or the adoption of more stringent regulatory standards covering sites at which we are currently performing remediation activities. As a result, there can be no assurance that these or any other similar third-party or governmental claims that may be filed in the future will not result in material liability to us.
We have also been named as a potentially responsible party at a contaminated disposal site operated by another party at the Casmalia Resources site in Southern California, as a result of the past disposal of hazardous waste by companies we have acquired or by our corporate predecessors. In addition, we have been named as a potentially responsible party by the California Department of Toxic Substance Control at a waste treatment site operated by another party in San Jose, California, allegedly as a result of waste we sent to be treated at that facility being discharged into the environment. Although liabilities for such historical treatment and disposal activities have not materially affected our financial condition to date, we cannot assure you that past disposal activities will not result in liability that will materially affect us in the future, nor can we provide assurance that we do not have environmental exposures of which we are unaware and which could adversely affect our operating results.
Over the years, environmental laws have become, and in the future may continue to become, more stringent, imposing greater compliance costs and increasing risks and penalties associated with violations. We operate in several environmentally sensitive locations and are subject to potentially conflicting and changing regulatory agendas of political, business and environmental groups. Changes in or restrictions on discharge limits, emissions levels, permitting requirements and material storage or handling could require a higher than anticipated level of remediation activities, operating expenses and capital investment or, depending on the severity of the impact of the foregoing factors, costly plant relocation.
In addition, the electronics industry became subject to the European Union's RoHS (Restriction of Hazardous Substances) and WEEE (Waste from Electrical and Electronic Equipment) directives which took effect beginning in 2005. Parallel initiatives have been adopted in other jurisdictions, including several states in the United States and the People's Republic of China. RoHS prohibits the use of lead, mercury and certain other specified substances in electronics products and WEEE requires industry OEMs to assume responsibility for the collection, recycling and management of waste electronic products and components. Although we believe we have implemented procedures to make our manufacturing process RoHS compliant, a successful assertion by a governmental entity of non-compliance could result in significant costs and/or penalties. In the case of WEEE, the compliance responsibility rests primarily with OEMs rather than with EMS companies. However, OEMs may turn to EMS companies for assistance in meeting their WEEE obligations, which could increase our costs.
Consolidation in the electronics industry may adversely affect our business by increasing customer buying power and increasing prices we pay for components.
Consolidation in the electronics industry among our customers, our suppliers and/or our competitors may increase as companies combine to achieve further economies of scale and other synergies. Consolidation in the electronics industry could result in an increasing number of very large electronics companies offering products in multiple sectors of the electronics industry. The significant purchasing and market power of these large companies could decrease the prices paid to us by these customers. In addition, if one of our customers is acquired by another company that does not rely on us to provide EMS services either because it has its own production facilities or relies on another provider of similar services, we may lose that customer's business. Similarly, consolidation among our suppliers could result in a sole or limited source for certain components used in our customers' products. Any such consolidation could cause us to be required to pay increased prices for such components, which would reduce our gross margin and profitability.
Employee theft or fraud could result in loss.
Certain of our employees have access to, or signature authority with respect to, bank accounts or other company assets, which exposes us to the risk of fraud or theft. In addition, certain employees have access to key IT infrastructure and to customer and other information that is commercially valuable. Should any employee, for any reason, compromise our IT systems, or misappropriate customer or other information, we could incur losses, including losses relating to claims by our customers against us, the willingness of customers to do business with us may be damaged and, in the case of our defense business, we could be debarred from future participation in government programs. Any losses due to employee fraud or malfeasance may not be fully covered by insurance.
We may not be successful in implementing and integrating strategic transactions or in divesting non-strategic assets, which could cause our financial results to fail to meet our forecasts.
From time to time, we may undertake strategic transactions that give us the opportunity to access new customers and new end-customer markets, to obtain new manufacturing and service capabilities and technologies, to enter new geographic manufacturing locations, to lower our manufacturing costs and improve our profits, and to further develop existing customer relationships. Strategic transactions involve a number of risks, uncertainties and costs, including the following:
| |
• | integrating acquired operations and businesses including in regions or countries in which we have not previously operated; |
| |
• | incurring severance and other restructuring costs to rationalize any purchased operation, which would reduce our net income; |
| |
• | obtaining regulatory approvals or other conditions to closing, which could delay the closing of strategic transactions; |
| |
• | diverting management attention from day-to-day duties in order to implement and integrate strategic transactions; |
| |
• | scaling up production and coordinating management of operations at new sites; |
| |
• | incurring transaction expenses, including fees of investment bankers, attorneys and accountants, which could be significant; |
| |
• | separating operations or support infrastructure for entities divested; |
| |
• | managing and integrating operations in geographically dispersed locations; |
| |
• | maintaining customer, supplier or other favorable business relationships of acquired operations and terminating unfavorable relationships; |
| |
• | integrating the acquired company's systems into our management information systems; |
| |
• | satisfying unforeseen liabilities of acquired businesses, including liability for past violations of law and environmental liabilities, which could require the expenditure of material amounts of cash or subject us to ongoing regulatory scrutiny or requirements; |
| |
• | operating in the geographic market or industry sector of the business acquired in which we may have little or no experience; |
| |
• | complying with laws of new jurisdictions in which we have not previously operated; |
| |
• | improving and expanding our management information systems to accommodate expanded operations; and |
| |
• | losing key employees of acquired operations. |
Any of these factors could prevent us from realizing the anticipated benefits of a strategic transaction, and our failure to realize these benefits could reduce our sales below and increase our costs above our forecasts and could cause write-downs of the value of the business acquired which would decrease our net income. Acquisitions may also be dilutive to our earnings per share, particularly if our projections and assumptions about the acquired business' future operating results prove to be inaccurate. As a result, although the goal of our acquisitions is to improve our business and increase stockholder value, any transactions that we complete may ultimately fail to increase our sales and net income and stock price.
If we are unable to protect our intellectual property or infringe, or are alleged to infringe, upon intellectual property of others, we could lose sales or be required to pay significant amounts in costs or damages.
We rely on a combination of copyright, patent, trademark and trade secret laws and restrictions on disclosure to protect our intellectual property rights. We cannot be certain that the steps we have taken will prevent unauthorized use of our intellectual property. For example, we rely in part upon patents to protect our intellectual property position. However, a number of our patents covering certain aspects of our manufacturing processes or products have expired or will expire in the near future. Such expirations reduce our ability to assert claims against competitors or others who use or sell similar technology. Any failure to protect our intellectual property rights would diminish or eliminate the competitive advantages that we derive from our proprietary technology.
We are also subject to the risk that former employees violate the terms of their proprietary information agreements with us which require them to keep confidential and not to use for their benefit information obtained in the course of their employment with us. Should a key former employee use or disclose such information, including information concerning our customers, pricing, capabilities or strategy, our ability to obtain new customers and to compete could be adversely impacted.
Finally, we may occasionally become involved in administrative proceedings, lawsuits or other proceedings if others allege that we infringe on their intellectual property rights. Some of these claims could subject us to significant liability for damages and invalidate our property rights. If successful, such claims could impair our ability to collect royalties or license fees or could force us or our customers to:
| |
• | stop producing products that use the challenged intellectual property; |
| |
• | obtain from the owner of the infringed intellectual property, at our expense, a license to sell the relevant technology at an additional cost, which license may not be available on reasonable terms, or at all; or |
| |
• | redesign those products or services that use the infringed technology. |
We sometimes design products on a contract basis or jointly with our customers. In these situations, we may indemnify our customer against liability caused by claims that the design infringes the intellectual property rights of a third party. Such indemnification claims could require us to assume the defense of such a claim, the cost of which could be significant.
Any of these results could reduce our revenue, increase our costs and reduce our net income and could damage our reputation with our customers. In addition, any type of intellectual property lawsuit, whether initiated by us or a third party, would likely be time consuming and expensive to resolve and would divert management's time and attention.
We may not have sufficient insurance coverage for potential claims and losses, which could leave us responsible for certain costs and damages.
We carry various forms of business and liability insurance in types and amounts we believe are reasonable and customary for similarly situated companies in our industry. However, we do not have insurance coverage for all of the risks and liabilities we assume in connection with the products and services we provide to our customers, including failure to comply with typical customer warranties for workmanship, product liability, intellectual property infringement and product recall claims and losses due to hacking or intrusion into our IT infrastructure. In addition, our policies generally have deductibles that would reduce the amount of our potential recoveries from insurance. As a result, not all of our potential business losses are covered under our insurance policies. Should we sustain a significant uncovered loss, our net income would be reduced.
Provisions of the Dodd-Frank Act relating to “Conflict Minerals” may increase our costs and lead to reputational challenges.
The Dodd-Frank Wall Street Reform and Consumer Protection Act contains provisions to improve transparency and accountability concerning the supply of certain minerals originating from the Democratic Republic of Congo (DRC) and adjoining countries that are believed to be benefitting armed groups. As a result, the SEC has recently adopted new due diligence, disclosure and reporting requirements for companies which manufacture products that include components containing such minerals, regardless of whether the minerals are mined in the DRC or adjoining countries. Since we manufacture such products for our customers, we will be required to comply with the new SEC rules, with our first required report due in May 2014. Such regulations could decrease the availability and increase the prices of components used in our customers' products, particularly if we choose (or are required by our customers) to source such components from different suppliers than we use now. In addition, as our supply chain is complex and the method of complying with the new SEC rules is unclear, we expect that the compliance process will be both time-consuming and costly. We may face reputational challenges with our customers and other stakeholders if we are unable to sufficiently verify the origins of minerals contained in the components included in our customers' products through the due diligence procedures that we implement.
Changes in financial accounting standards or policies have affected, and in the future may affect, our reported financial condition or results of operations; additionally, changes in securities laws and regulations have increased, and are likely to continue to increase, our operating costs.
We prepare our consolidated financial statements in conformity with accounting principles generally accepted in the United States, or U.S. GAAP. Our preparation of financial statements in accordance with U.S. GAAP requires that we make estimates and assumptions that affect the recorded amounts of assets and liabilities, disclosure of those assets and liabilities as of the date of the financial statements and the recorded amounts of expenses during the reporting period. A change in the facts and circumstances surrounding those estimates could result in a change to our estimates and could impact our future operating results.
In addition, these principles are subject to interpretation by the Financial Accounting Standards Board (FASB), the SEC and various bodies formed to interpret and create accounting policies. A change in those policies can have a significant effect on our reported results and may affect our reporting of transactions which are completed before a change is announced. Accounting policies affecting many other aspects of our business, including rules relating to revenue recognition, off-balance sheet transactions, stock-based compensation, restructuring, acquisition accounting, asset disposals and asset retirement obligations, leases, intangible assets, derivative and other financial instruments and in-process research and development charges, have recently been revised or are under review. Changes to those rules or the questioning of how we interpret or implement those rules may have a material adverse effect on our reported financial results or on the way we conduct business. In addition, the anticipated convergence of U.S. GAAP and international financial accounting standards creates uncertainty as to the financial accounting policies and practices we will need to adopt in the future.
Finally, corporate governance, public disclosure and compliance practices continue to evolve based upon continuing legislative action, SEC rulemaking and stockholder advisory group policies. As a result, the number of rules and regulations applicable to us may increase, which would also increase our legal and financial compliance costs and the amount of time management must devote to compliance activities. For example, the SEC has adopted rules requiring disclosure of the extent to which we use certain minerals in the production of our products and California has enacted regulations requiring disclosure of our business practices intended to reduce the risk of human trafficking and slavery in our supply chain. Increasing regulatory
burdens could also make it more difficult for us to attract and retain qualified members of our board of directors, particularly to serve on our audit committee, and qualified executive officers in light of an increase in actual or perceived workload and liability for serving in such positions.
Outages, computer viruses, break-ins, malware and similar events could disrupt our operations.
We rely on information technology networks and systems, some of which are owned and operated by third parties, to process, transmit and store electronic information. In particular, we depend on our information technology infrastructure for a variety of functions, including worldwide financial reporting, inventory management, procurement, invoicing and email communications. Any of these systems may be susceptible to outages due to fire, floods, power loss, telecommunications failures, terrorist attacks and similar events. Despite the implementation of network security measures, our systems and those of third parties on which we rely may also be vulnerable to computer viruses, break-ins, malware and similar disruptions. Malware, if surreptitiously installed on our systems and not timely detected and removed, could collect and disclose sensitive information relating to our customers, employees or others, exposing us to legal liability and causing us to suffer reputational damage. If we or our vendors are unable to prevent such outages and breaches, our operations could be disrupted.
The market price of our common stock is volatile.
The stock market in recent years has experienced significant price and volume fluctuations that have affected the market prices of companies, including companies in the EMS business. These fluctuations have often been unrelated to the operating performance of these companies. The market for our common stock has been and may in the future be subject to similar volatility. Factors such as fluctuations in our operating results, announcements by our competitors or other events affecting companies in the electronics industry, currency fluctuations, general market fluctuations and macro economic conditions may cause the market price of our common stock to decline.
We are subject to risks associated with natural disasters and global events.
We conduct a significant portion of our activities including manufacturing, administration and information technology management in areas that have experienced natural disasters, such as major earthquakes, hurricanes, floods and tsunamis. For example, in March 2011, Japan experienced a major earthquake and tsunami and in October 2011, flooding occurred in large parts of Thailand. Our insurance coverage with respect to damages to our facilities or our customers' products caused by natural disasters is limited and is subject to deductibles and coverage limits and, as a result, may not be sufficient to cover all of our losses. For example, our policies do not cover damage due to earthquake. In addition, coverage may not continue to be available at commercially reasonable rates and terms. In the event of a major earthquake or other disaster affecting one or more of our facilities, our operations and management information systems, which control our worldwide procurement, inventory management, shipping and billing activities, could be significantly disrupted. Such events could delay or prevent product manufacturing and shipment for the time required to transfer production or repair, rebuild or replace the affected manufacturing facilities. While we have disaster recovery plans in place, there can be no assurance that such plans will be sufficient to allow our operations to continue in the event of every natural or man-made disaster, pandemic or other extraordinary event. Any extended inability to continue our operations at unaffected facilities following such an event would reduce our revenue and potentially damage our reputation as a reliable supplier.
Our profitability could be adversely impacted by climate change initiatives.
Concern over climate change has led to state, federal and international legislative and regulatory initiatives aimed at reducing carbon dioxide and other greenhouse gas emissions. While we don't expect existing or currently proposed initiatives to directly impact our business operations in the near future, these measures could over the long term lead to an increase in the cost of energy used in the manufacture of our products as a result of restrictions placed upon power generators and distributors. We can't currently estimate the impact of any such indirect costs. However, should our operating costs in fact rise as a result of any current, proposed or future greenhouse gas initiatives, and we are not able to pass such costs to our customers, our profitability would be reduced.
Item 1B. Unresolved Staff Comments
None.
Item 2. Properties
Facilities. Our customers market numerous products throughout the world and therefore need to access manufacturing services on a global basis. To enhance our integrated manufacturing solutions offerings, we seek to locate our facilities either near our customers and our customers' end markets in major centers for the electronics industry or, when appropriate, in lower cost locations. Many of our plants located near customers and their end markets are focused primarily on final system assembly and test, while plants located in lower cost areas are engaged primarily in higher volume, less complex component and subsystem manufacturing and assembly.
We continue to evaluate our global manufacturing operations and restructure our facilities and operations to bring our manufacturing capacity in line with demand and our manufacturing strategy and to provide cost efficient services for our customers. Through this process, we have closed certain facilities not required to satisfy current demand levels. We provide extensive operations in lower cost locations including Latin America, Eastern Europe, China and Southeast Asia and we plan to expand our presence in these lower cost locations as appropriate to meet the needs of our customers.
As of September 29, 2012, the approximate square footage of our manufacturing facilities by country was as follows:
|
| | |
| Approximate Square Footage |
Argentina | 1,335 |
|
Australia | 7,105 |
|
Brazil | 265,933 |
|
Canada | 183,698 |
|
China | 2,813,996 |
|
Columbia | 1,390 |
|
Czech Republic | 70,870 |
|
Finland | 223,060 |
|
Germany | 363,778 |
|
Hong Kong | 31,457 |
|
Hungary | 592,388 |
|
India | 240,700 |
|
Indonesia | 99,210 |
|
Ireland | 110,000 |
|
Israel | 295,893 |
|
Malaysia | 516,556 |
|
Mexico | 2,021,984 |
|
Singapore | 463,019 |
|
South Africa | 3,670 |
|
Sweden | 77,425 |
|
Thailand | 326,293 |
|
United Kingdom | 38,203 |
|
United States | 2,918,982 |
|
Total | 11,666,945 |
|
As of September 29, 2012, our active manufacturing facilities consist of 8,309,194 square feet in facilities that we own, with the remaining 3,357,751 square feet in leased facilities under lease terms expiring between 2013 and 2042.
In addition to the above, we have 176,067 square feet of logistics and other non-manufacturing space that we are currently using and 1,593,808 square feet of space in inactive facilities, of which 580,893 square feet is in domestic locations and 1,012,915 square feet is in international locations. Additionally, 205,370 square feet of space in our inactive facilities is leased to third parties. We are currently undertaking an aggressive program to sublease or terminate leases for unused facilities and to sell owned properties that are no longer expected to serve our future needs.
We regularly evaluate our expected future facilities requirements. Although we believe our existing facilities are
adequate to meet our current requirements, we anticipate expanding two of our international facilities within the next 12 months in order to support projected business volumes in these locations.
Certifications and Registrations. Certifications and registrations under industry standards are important to our business because many customers rely on them to confirm our adherence to manufacturing process and quality standards. Certain markets, such as telecommunications, medical, aviation, defense, aerospace and automotive, require adherence to industry-specific standards. Substantially all of our manufacturing facilities are registered under ISO 9001:2008, a standard published by the International Organization for Standardization. As part of the ISO 9001:2008 certification process, we have a highly developed quality management system and continually improve its effectiveness in accordance with its requirements. We use this registration to demonstrate our ability to consistently provide product that meets customer and applicable regulatory requirements and enhance customer satisfaction through its effective application. ISO 9001:2008 registration is of particular importance to our customers throughout the world.
In addition to ISO 9001:2008, most of our facilities are TL 9000 registered. The TL 9000 quality system requirements and quality system metrics are designed specifically for the telecommunications industry to promote consistency and efficiency, reduce redundancy and improve customer satisfaction. Included in the TL 9000 system are performance-based metrics that quantify reliability and quality performance of the product. The majority of our facilities are also compliant with the standards set by Underwriters Laboratories (UL). These standards define requirements for quality, manufacturing process control and manufacturing documentation and are required by many OEMs in the communications sector of the electronics industry.
Our medical systems division has identified certain manufacturing facilities to be centers of excellence for medical products manufacturing. These facilities are FDA and ISO 13485:2003 certified and, where appropriate, FDA registered. All facilities are fully compliant to the FDA's quality systems regulations.
Our defense and aerospace operations are headquartered in Huntsville, Alabama and are housed in a facility dedicated to meeting the specialized needs of our defense and aerospace customers. This defense and aerospace operation is AS9100 registered and is also certified under various U.S. military specifications as well as under ANSI and other standards appropriate for defense and aerospace suppliers. Other selected operations around the world are also AS9100 registered.
Our automotive facilities are strategically located worldwide. Substantially all of our automotive facilities are certified to ISO/TS 16949:2009, the automotive industry standard.
Item 3. Legal Proceedings
Non-US Proceedings
In November 2006 and December 2007, a non-US governmental entity made certain claims for penalties against us asserting that we did not comply with bookkeeping rules in accordance with applicable tax regulations. We have provided documents that we believe demonstrate our compliance with these tax regulations. We have appealed the penalties in administrative court, and have not paid the penalties pending review by the court. The administrative court has not indicated when it will issue a decision. We believe we have a meritorious position in this matter and are contesting these claims vigorously, although there can be no assurance that these claims will not have a material adverse effect on our results of operations in the future.
See also Note 8 of Notes to Consolidated Financial Statements.
Other Proceedings
We are subject to various federal, state, local and foreign laws and regulations concerning environmental protection, including those addressing the discharge of pollutants into the air and water, the management and disposal of hazardous substances and wastes, the cleanup of contaminated sites, the materials used in products, and the recycling, treatment and disposal of materials. We have been named in a lawsuit alleging operations at our current and former sites in Orange County, California contributed to groundwater contamination and our Canadian subsidiary is party to an order of the Ontario, Canada Ministry of Environment with respect to our former Brockville site requiring us to perform investigative and remediation activities. There can be no assurance that these or any other similar third party or governmental claims will not result in material liability to us in the future.
From time to time, we may be involved in other routine legal proceedings, as well as demands, claims and threatened litigation, that arise in the normal course of our business. The ultimate outcome of any litigation is uncertain and unfavorable
outcomes could have a negative impact on our results of operations and financial condition. Regardless of outcome, litigation can have an adverse impact on us as a result of incurrence of defense costs, diversion of management resources and other factors. We record liabilities for legal proceedings when a loss becomes probable and the amount of loss can be reasonably estimated.
Item 4. Mine Safety Disclosures.
Not applicable.
PART II
Item 5. Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.
Market Information
Our common stock is traded on the Nasdaq Global Select Market under the symbol SANM. The following table lists the high and low intra-day prices for our common stock as reported on NASDAQ.
|
| | | | | | | | |
2012 | | High | | Low |
First quarter | | $ | 9.64 |
| | $ | 6.01 |
|
Second quarter | | $ | 12.55 |
| | $ | 9.28 |
|
Third quarter | | $ | 11.70 |
| | $ | 6.62 |
|
Fourth quarter | | $ | 9.59 |
| | $ | 7.02 |
|
|
| | | | | | | | |
2011 | | High | | Low |
First quarter | | $ | 13.42 |
| | $ | 10.41 |
|
Second quarter | | $ | 17.32 |
| | $ | 9.95 |
|
Third quarter | | $ | 12.50 |
| | $ | 9.19 |
|
Fourth quarter | | $ | 11.79 |
| | $ | 6.53 |
|
As of November 9, 2012, we had approximately 1,601 holders of record of our common stock. On November 9, 2012, the last reported sales price of our common stock on the Nasdaq Global Select Market was $8.94 per share.
The following graph compares the cumulative 5-year total return provided shareholders on our common stock relative to the cumulative total returns of the S&P 500 index and the NASDAQ Electronic Components index. An investment of $100 (with reinvestment of all dividends) is assumed to have been made in our common stock and in each of the indexes on September 30, 2007 and its relative performance is tracked through September 29, 2012.
|
| | | | | | | | | | | | | | | | | | |
| | 9/30/2007 | | 9/27/2008 | | 10/3/2009 | | 10/2/2010 | | 10/1/2011 | | 9/29/2012 |
Sanmina Corporation | | 100.00 |
| | 77.36 |
| | 64.31 |
| | 94.42 |
| | 52.52 |
| | 66.90 |
|
S&P 500 | | 100.00 |
| | 78.02 |
| | 72.63 |
| | 80.01 |
| | 80.93 |
| | 105.37 |
|
NASDAQ Electronic Components | | 100.00 |
| | 67.79 |
| | 73.93 |
| | 79.00 |
| | 75.80 |
| | 80.88 |
|
The stock price performance included in this graph is not necessarily indicative of future stock price performance.
Dividends
We have never declared or paid cash dividends on our common stock. We currently expect to retain future earnings for use in the operation and expansion of our business and do not anticipate paying cash dividends in the foreseeable future. Additionally, our ability to pay dividends is limited pursuant to covenants contained in our various debt agreements. See also “Item 7-Management's Discussion and Analysis of Financial Condition and Results of Operations-Liquidity and Capital Resources.”
Item 6. Selected Financial Data
The following selected financial data should be read in conjunction with “Item 7-Management's Discussion and Analysis of Financial Condition and Results of Operations” and “Item 8-Financial Statements and Supplementary Data,” included elsewhere in this Form 10-K.
FIVE YEAR SELECTED FINANCIAL HIGHLIGHTS
Consolidated Statements of Operations Data:
|
| | | | | | | | | | | | | | | | | | | |
| Year Ended |
| September 29, 2012 | | October 1, 2011 | | October 2, 2010 | | October 3, 2009 | | September 27, 2008 |
| (In thousands, except per share data) |
Net sales | $ | 6,093,334 |
| | $ | 6,602,411 |
| | $ | 6,318,691 |
| | $ | 5,177,481 |
| | $ | 7,202,403 |
|
Operating income (loss) | $ | 137,490 |
| | $ | 211,997 |
| | $ | 204,799 |
| | $ | (4,656 | ) | | $ | (384,160 | ) |
Income (loss) from continuing operations before income taxes | $ | 49,943 |
| | $ | 99,538 |
| | $ | 139,242 |
| | $ | (112,570 | ) | | $ | (490,331 | ) |
Provision for (benefit from) income taxes | (130,291 | ) | | 30,621 |
| | 16,807 |
| | 25,252 |
| | 22,605 |
|
Income (loss) from continuing operations | $ | 180,234 |
| | $ | 68,917 |
| | $ | 122,435 |
| | $ | (137,822 | ) | | $ | (512,936 | ) |
Income from discontinued operations, net of tax | — |
| | — |
| | — |
| | — |
| | 24,987 |
|
Net income (loss) | $ | 180,234 |
| | $ | 68,917 |
| | $ | 122,435 |
| | $ | (137,822 | ) | | $ | (487,949 | ) |
Basic earnings (loss) per share: | |
| | |
| | |
| | |
| | |
|
Continuing operations | $ | 2.22 |
| | $ | 0.86 |
| | $ | 1.55 |
| | $ | (1.67 | ) | | $ | (5.80 | ) |
Discontinued operations | $ | — |
| | $ | — |
| | $ | — |
| | $ | — |
| | $ | 0.28 |
|
Net income (loss) | $ | 2.22 |
| | $ | 0.86 |
| | $ | 1.55 |
| | $ | (1.67 | ) | | $ | (5.52 | ) |
Diluted earnings (loss) per share | | | | | | | | | |
Continuing operations | $ | 2.16 |
| | $ | 0.83 |
| | $ | 1.48 |
| | $ | (1.67 | ) | | $ | (5.80 | ) |
Discontinued operations | $ | — |
| | $ | — |
| | $ | — |
| | $ | — |
| | $ | 0.28 |
|
Net income (loss) | $ | 2.16 |
| | $ | 0.83 |
| | $ | 1.48 |
| | $ | (1.67 | ) | | $ | (5.52 | ) |
Shares used in computing per share amounts | | | | | | | | | |
Basic | 81,284 |
| | 80,345 |
| | 79,195 |
| | 82,528 |
| | 88,454 |
|
Diluted | 83,495 |
| | 83,158 |
| | 82,477 |
| | 82,528 |
| | 88,454 |
|
Consolidated Balance Sheet Data:
|
| | | | | | | | | | | | | | | | | | | |
| Year Ended |
| September 29, 2012 | | October 1, 2011 | | October 2, 2010 | | October 3, 2009 | | September 27, 2008 |
| (In thousands) |
Cash and cash equivalents | $ | 409,618 |
| | $ | 640,288 |
| | $ | 592,812 |
| | $ | 899,151 |
| | $ | 869,801 |
|
Net working capital | $ | 1,106,752 |
| | $ | 1,363,361 |
| | $ | 1,338,666 |
| | $ | 1,280,136 |
| | $ | 1,574,339 |
|
Total assets | $ | 3,167,786 |
| | $ | 3,353,973 |
| | $ | 3,301,796 |
| | $ | 3,123,897 |
| | $ | 3,530,727 |
|
Long-term debt (excluding current portion) | $ | 837,364 |
| | $ | 1,182,308 |
| | $ | 1,240,666 |
| | $ | 1,262,014 |
| | $ | 1,481,985 |
|
Stockholders' equity | $ | 963,781 |
| | $ | 770,517 |
| | $ | 661,601 |
| | $ | 519,070 |
| | $ | 673,488 |
|
Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations
This report contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. These statements relate to our expectations for future events and time periods. All statements other than statements of historical fact are statements that could be deemed to be forward-looking statements, including any statements regarding the expected amounts of future restructuring charges, future expansion plans, plans to sell or expand certain of our facilities, trends in future sales or results of operations, gross margin or operating margin, expenses, earnings or losses from operations, cash flow, inventory turns, synergies or other financial items; any statements of the plans, strategies and objectives of management for future operations; any statements concerning developments, performance or industry ranking; any statements regarding future economic conditions or performance; any statements regarding pending investigations, claims or disputes; any statements of expectation or belief; and any statements of assumptions underlying any of the foregoing. Generally, the words “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “future,” “intend,” “may,” "plan," “potential,” “predict,” “should,” “will,” and similar expressions identify forward-looking statements. Our forward-looking statements are based on current expectations, forecasts and assumptions and are subject to risks, uncertainties and changes in condition, significance, value and effect. As a result of the factors described herein, and in the documents incorporated herein by reference, including, in particular, those factors described under “Item1A. Risk Factors” we undertake no obligation to publicly disclose any revisions to these forward-looking statements to reflect events or circumstances occurring subsequent to filing this report with the Securities and Exchange Commission.
Overview
We are a leading independent global provider of integrated manufacturing solutions, components, products and repair, logistics and after-market services. Our revenue is generated from sales of our services primarily to original equipment manufacturers (OEMs) in the communications networks; computing and storage; multimedia; industrial and semiconductor capital equipment; defense and aerospace; medical; clean technology and automotive industries.
Prior to the fourth quarter of 2012, our operations were managed as a single business - Electronic Manufacturing Services. Effective in the fourth quarter of 2012, we decided to change the way we managed the business in order to place more emphasis on components, products and services requiring advanced technologies and / or addressing mission-critical applications. As a result, our operations are managed as two businesses:
1) Integrated Manufacturing Solutions (IMS), which is a reportable segment consisting of printed circuit board assembly and test, optical and RF (Radio Frequency) modules, final system assembly and test, and direct order fulfillment.
2) Components, Products and Services (CPS), consisting of Components, which includes interconnect systems (printed circuit board fabrication and backplane and cable assemblies) and mechanical systems (enclosures, precision machining and plastic injection molding); Products, which includes memory and SSD products from Viking Technology; products from SCI Technology for use in the defense and aerospace industry and storage products from Newisys; and Services, which includes design, engineering, logistics and repair services.
In accordance with the accounting rules for segment reporting, our only reportable segment is IMS, which represented 81% of our total revenue in 2012. Our CPS business consists of multiple operating segments which do not meet the quantitative thresholds for being presented as reportable segments. Therefore, financial information for these operating segments will be presented in a single category entitled “Components, Products and Services”.
All references in this section to years refer to our fiscal years ending on the last Saturday of each year closest to September 30th. Fiscal 2012, 2011 and 2010 are each 52 weeks.
Our strategy is to leverage our comprehensive service offering, advanced technologies, and global capabilities to further penetrate diverse end markets that we believe offer significant growth opportunities and have complex products that require higher value-added services. We believe this strategy differentiates us from our competitors and will drive more sustainable revenue growth and provide opportunities for us to ultimately achieve operating margins that exceed industry standards.
There are many challenges to successfully executing our strategy. For example, we compete with a number of companies in each of our key end markets. These include companies that are much larger than we are and smaller companies that focus on a particular niche. Although we believe we are well-positioned in each of our key end markets and are continuing to differentiate ourselves from our competitors, competition remains intense. Additionally, growing and leveraging our
components to drive vertical integration and improve our operating margins continues to be challenging. Revenue from our components decreased in 2012, which creates pressure on our operating margins since these products typically have a higher contribution margin than that generated by our IMS business. We continue to address these challenges on both a short-term and long-term basis. For example, we recently announced the closure of a foreign components plant and made changes to the components operations management team.
In late 2008, the business environment became challenging due to adverse global economic conditions. These conditions slowed global economic growth and resulted in recessions in many locations, including the U.S., Europe and certain countries in Asia. These conditions materially and adversely impacted our financial condition and results of operations for 2009. Global economic conditions improved throughout 2010, contributing to a substantial increase in our business volume. As a result of this increase in business volume and the realization of benefits from our previous restructuring actions, our net sales and gross profit increased significantly during 2010 and we had our first profitable year since 2001. We were also profitable in 2011 and 2012. The economic environment, however, became more challenging in 2012 due to high levels of unemployment, concerns about debt levels and possible recessions in certain countries, and other factors. These conditions have resulted in reduced demand for many of our customers' products, causing these customers to reduce or reschedule their orders with us. We have experienced fluctuations in our results of operations in the past and may continue to experience such fluctuations in the future.
During 2012, we reduced our net long-term debt obligations by $360.0 million, which is expected to result in significant interest expense savings in future periods primarily due to our redemption of $400.0 million of notes due in 2016 which carried a fixed interest rate of 8.125%.
A relatively small number of customers have historically generated a significant portion of our net sales. Sales to our ten largest customers represented approximately 50% of our net sales for 2012, 2011 and 2010. For 2012, 2011 and 2010, one customer represented more than 10% of our net sales in each period.
We typically generate a significant portion of our net sales from international operations. Net sales generated from non-U.S. operations were approximately 80% of our total net sales for 2012, 2011 and 2010. The concentration of international operations has resulted primarily from a desire on the part of many of our customers to move production to lower cost locations in regions such as Asia, Latin America and Eastern Europe. We expect this trend to continue.
Historically, we have had substantial recurring sales from existing customers. We typically enter into supply agreements with our major OEM customers. These agreements generally have terms ranging from three to five years and cover the manufacture of a range of products. Under these agreements, a customer typically agrees to purchase its requirements for specific products in particular geographic areas from us. These agreements generally do not obligate the customer to purchase minimum quantities of products. In some circumstances, our supply agreements with customers provide for cost reduction objectives during the term of the agreement.
Critical Accounting Policies and Estimates
Management's discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements which have been prepared in accordance with accounting principles generally accepted in the United States. We review the accounting policies used in reporting our financial results on a regular basis. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, net sales and expenses and related disclosure of contingent liabilities. On an ongoing basis, we evaluate the process used to develop estimates for certain reserves and contingent liabilities, including those related to product returns, accounts receivable, inventories, income taxes, warranty obligations, environmental matters, restructuring, and contingencies and litigation. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Our actual results may differ materially from these estimates.
We believe the following critical accounting policies reflect the more significant judgments and estimates used by us in preparing our consolidated financial statements:
Accounts Receivable and Other Related Allowances— We estimate uncollectible accounts, product returns and other adjustments related to current period net sales to establish related allowances. In making these estimates, we analyze the creditworthiness of our customers, past experience, changes in customer demand, and the overall economic climate in the industries we serve. If actual uncollectible accounts, product returns or other adjustments differ significantly from our estimates, the amount of sales or operating expenses we report would be affected. One of our most significant credit risks is the ultimate realization of our accounts receivable. This risk is mitigated by (i) a significant portion of sales to financially sound companies, (ii) ongoing credit evaluation of our customers, (iii) frequent contact with our customers, especially our most significant customers, which enables us to monitor changes in their business operations and to respond accordingly and (iv) obtaining, in certain cases, a guaranty from the customer's parent entity. To establish our allowance for doubtful accounts, we evaluate credit risk related to specific customers based on their financial condition and the current economic environment; however, we are not able to predict the inability of our customers to meet their financial obligations to us. We believe the allowances we have established are adequate under the circumstances; however, a change in the economic environment or a customer's financial condition could cause our estimates of allowances, and consequently the provision for doubtful accounts, to change, which could have a significant adverse impact on our financial position and/or results of operations. To establish the allowance for product returns and other adjustments, we primarily utilize historical data.
Inventories— We state inventories at the lower of cost (first-in, first-out method) or market value. Cost includes raw materials, labor and manufacturing overhead. We regularly evaluate the carrying value of our inventories and make provisions to reduce excess and obsolete inventories to their estimated net realizable values. The ultimate realization of inventory carrying amounts is affected by changes in customer demand for inventory that customers are not contractually obligated to purchase and inventory held for specific customers who are experiencing financial difficulties. Inventory write-downs are recorded based on forecasted demand, past experience with specific customers, the ability to redistribute inventory to other programs or back to our suppliers, and whether customers are contractually obligated and have the ability to pay for the related inventory. Certain payments received from customers for inventories that have not been shipped to customers or otherwise disposed of are netted against inventory.
We procure inventory based on specific customer orders and forecasts. Customers have limited rights of modification (for example, cancellations) with respect to these orders. Customer modifications of orders affecting inventory previously procured by us and our purchases of inventory beyond customer needs may result in excess and obsolete inventory. Although we may be able to use some excess inventory for other products we manufacture, a portion of the cost of this excess inventory may not be returned to the vendors or recovered from customers. Write-offs or write-downs of inventory could relate to:
| |
• | declines in the market value of inventory; |
| |
• | inventory held for specific customers who are experiencing financial difficulties; and |
| |
• | changes in customer demand for inventory, such as cancellation of orders, and our purchases of inventory beyond customer needs that result in excess quantities on hand that we are not able to return to the vendor, use to fulfill orders from other customers or charge back to the customer. |
Our practice is to dispose of excess and obsolete inventory as soon as practicable after such inventory has been identified as having no value to us.
Property, Plant and Equipment—We review property, plant and equipment for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset or asset group may not be recoverable. An asset or asset
group is considered impaired if its carrying amount exceeds the undiscounted future net cash flows the asset or asset group is expected to generate. If an asset or asset group is considered impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the asset or asset group exceeds its fair value. An asset group is the unit of accounting for a long-lived asset or assets to be held and used, which represents the lowest level for which identifiable cash flows are largely independent of the cash flows of other groups of assets. For vertically integrated plants, each individual plant, together with the other plants with which it is vertically integrated, is an asset group. For all other plants, each individual plant is an asset group. For asset groups for which a building is the primary asset, we estimate fair value primarily based on data provided by commercial real estate brokers. For other assets, we estimate fair value based on projected discounted future net cash flows. Management applies significant judgment in estimating future cash flows.
Income Taxes— We estimate our income tax provision or benefit in each of the jurisdictions in which we operate, including estimating exposures related to examinations by taxing authorities. We believe our accruals for tax liabilities are adequate for all open years, based on our assessment of many factors including past experience and interpretations of tax law applied to the facts of each matter. Although we believe our accruals for tax liabilities are adequate, tax regulations are subject to interpretation and the tax controversy process is inherently lengthy and uncertain; therefore, our assessments can involve a series of complex judgments about future events and rely heavily on estimates and assumptions. To the extent the probable tax outcome of these matters changes, such changes in estimates will impact our income tax provision in the period in which such determination is made.
We must also make judgments regarding the realizability of deferred tax assets. The carrying value of our net deferred tax assets is based on our belief that it is more likely than not that we will generate sufficient future taxable income in certain jurisdictions to realize these deferred tax assets. We evaluate positive and negative evidence each reporting period when assessing the need for a valuation allowance. A valuation allowance is established for deferred tax assets when we believe realization of such assets is not more likely than not. Our judgments regarding future taxable income may change due to changes in market conditions, new or modified tax laws, tax planning strategies or other factors. If our assumptions, and consequently our estimates, change in the future, the valuation allowances we have established may be increased or decreased, resulting in a respective increase or decrease in income tax expense. As a result of our analysis of the positive and negative evidence available at the end of 2012, we released $158.7 million of our valuation allowance against our U.S. deferred tax assets. We will continue to evaluate all evidence in future periods to determine if further release of the valuation allowance is warranted.
Our effective tax rate is highly dependent upon the amount and geographic distribution of our worldwide income or losses, the tax regulations and tax holidays in each geographic region, the utilization of net operating losses, the availability of tax credits and carryforwards, and the effectiveness of our tax planning strategies.
We only recognize or continue to recognize tax positions that meet a “more likely than not” threshold of being upheld. Interest and penalties related to unrecognized tax benefits are recognized as a component of income tax expense.
Results of Operations
Years Ended September 29, 2012, October 1, 2011 and October 2, 2010.
The following table presents our key operating results.
|
| | | | | | | | | | | |
| Year Ended |
| September 29, 2012 | | October 1, 2011 | | October 2, 2010 |
| (In thousands) |
Net sales | $ | 6,093,334 |
| | $ | 6,602,411 |
| | $ | 6,318,691 |
|
Gross profit | $ | 435,782 |
| | $ | 510,351 |
| | $ | 482,990 |
|
Operating income | $ | 137,490 |
| | $ | 211,997 |
| | $ | 204,799 |
|
Net income | $ | 180,234 |
| | $ | 68,917 |
| | $ | 122,435 |
|
The following table presents certain statements of operations data expressed as a percentage of net sales.
|
| | | | | | | |
| Year Ended |
| September 29, 2012 | | October 1, 2011 | | October 2, 2010 |
Net sales | 100.0 | | 100.0 |
| | 100.0 |
|
Cost of sales | 92.8 | | 92.3 |
| | 92.4 |
|
Gross margin | 7.2 | | 7.7 |
| | 7.6 |
|
| | | | | |
Operating expenses: | | | |
| | |
|
Selling, general and administrative | 4.0 | | 3.7 |
| | 4.0 |
|
Research and development | 0.4 | | 0.3 |
| | 0.2 |
|
Other | 0.5 | | 0.5 |
| | 0.2 |
|
Total operating expenses | 4.9 | | 4.5 |
| | 4.4 |
|
Net Sales
Net sales decreased from $6.6 billion for 2011 to $6.1 billion for 2012, a decrease of 7.7%. Net sales increased from $6.3 billion for 2010 to $6.6 billion for 2011, an increase of 4.5%. Sales by end market were as follows:
|
| | | | | | | | | | | | | | | | | | | | | | | | | |
| Year Ended | | 2012 vs. 2011 | | 2011 vs. 2010 |
| September 29, 2012 | | October 1, 2011 | | October 2, 2010 | | Increase/(Decrease) | | Increase/(Decrease) |
| (Dollars in thousands) |
Communications | $ | 2,858,827 |
| | $ | 3,134,550 |
| | $ | 2,483,935 |
| | $ | (275,723 | ) | | (8.8 | )% | | $ | 650,615 |
| | 26.2 | % |
Industrial, Defense and Medical | 1,547,127 |
| | 1,609,370 |
| | 1,614,233 |
| | (62,243 | ) | | (3.9 | )% | | (4,863 | ) | | (0.3 | )% |
Enterprise Computing and Storage | 966,851 |
| | 913,062 |
| | 1,072,376 |
| | 53,789 |
| | 5.9 | % | | (159,314 | ) | | (14.9 | )% |
Multimedia | 720,529 |
| | 945,429 |
| | 1,148,147 |
| | (224,900 | ) | | (23.8 | )% | | (202,718 | ) | | (17.7 | )% |
Total | $ | 6,093,334 |
| | $ | 6,602,411 |
| | $ | 6,318,691 |
| | $ | (509,077 | ) | | (7.7 | )% | | $ | 283,720 |
| | 4.5 | % |
Sales to customers in our communications end market decreased from 2011 to 2012 primarily as a result of reduced demand from existing customers, particularly for wireless communications products. Sales in the multimedia market decreased from 2011 to 2012 primarily as a result of reduced demand for set-top boxes. Sales in our industrial, defense and medical end market decreased from 2011 to 2012 primarily due to weaker demand for semiconductor capital equipment. The increase from 2011 to 2012 in our enterprise computing and storage end market was primarily attributable to increased demand from existing customers, both for established programs and new program wins for new technologies introduced by our customers.
The increase from 2010 to 2011 in our communications end market is primarily attributable to increased demand from existing customers, both for established programs and new program wins for new technologies introduced by our customers. Despite a significant decrease in demand from defense customers resulting primarily from reduced U.S. defense budget spending, sales in our industrial defense and medical end market were relatively flat from 2010 to 2011 due to stronger demand from industrial and medical customers. Sales to customers in our enterprise computing and storage end market decreased from 2010 to 2011 as a result of certain customer programs going end-of-life, the effect of which was not completely offset by new programs. Sales to customers in our multimedia market decreased from 2010 to 2011 primarily as a result of reduced demand from one program.
Gross Margin
Gross margin was 7.2%, 7.7% and 7.6% in 2012, 2011 and 2010, respectively. The decrease from 2011 to 2012 was primarily attributable to decreased sales, especially for our components which typically have higher contribution margins than our integrated manufacturing solutions. The increase from 2010 to 2011 was primarily a result of the profit contribution from increased business volume and improved operational performance in our components operations. We have experienced fluctuations in gross margin in the past and may continue to do so in the future. Fluctuations in our gross margins may be caused by a number of factors, including:
| |
• | Changes in customer demand and sales volumes for our vertically integrated system components and subassemblies; |
| |
• | Changes in the overall volume of our business; |
| |
• | Changes in the mix of high and low margin products demanded by our customers; |
| |
• | Parts shortages and operational disruption caused by natural disasters; |
| |
• | Greater competition in the EMS industry and pricing pressures from OEMs due to greater focus on cost reduction; |
| |
• | Provisions for excess and obsolete inventory; |
| |
• | Level of operational efficiency; |
| |
• | Pricing pressure in the electronics industry resulting from economic conditions , with EMS companies competing more aggressively on cost to obtain new or maintain existing business; |
| |
• | Wage inflation and rising materials costs; and |
| |
• | Our ability to transition manufacturing and assembly operations to lower cost regions in an efficient manner. |
Selling, General and Administrative
Selling, general and administrative expenses were $240.9 million, $247.1 million and $252.5 million in 2012, 2011 and 2010, respectively. As a percentage of net sales, selling, general and administrative expenses were 4.0% for 2012, 3.7% for 2011 and 4.0% for 2010. The decrease in absolute dollars from 2011 to 2012 was primarily attributable to lower personnel-related costs.
The decrease in absolute dollars from 2010 to 2011 was primarily attributable to reduced incentive compensation and bad debt expense, offset partially by higher personnel costs resulting from increased headcount.
Research and Development
Research and development expenses were $21.9 million, $20.8 million and $13.0 million in 2012, 2011 and 2010, respectively. As a percentage of net sales, research and development expenses were 0.4% for 2012, 0.3% for 2011 and 0.2% for 2010. The increase from 2011 to 2012 was primarily attributable to new projects in our enterprise computing and storage end market. The increase in absolute dollars from 2010 to 2011 was primarily attributable to investments in new projects in multiple business units.
Restructuring
Restructuring Plans - 2012
In 2012, we initiated restructuring plans related to plant closures and business reorganizations. Costs associated with
these plans are expected to be $23.4 million and to include employee severance, costs related to leased facilities, asset impairment charges and other exit costs. In connection with actions taken to date under these plans, we recorded employee termination benefits of $11.6 million for approximately 2,150 employees, $0.5 million of costs related to leased facilities and $3.5 million of asset impairment charges. These plans are expected to be completed within the next year. As of September 29, 2012, $10.3 million of severance remains payable and is expected to be paid in 2013.
Below is a summary of restructuring costs associated with facility closures and other consolidation efforts that were implemented in 2012:
|
| | | | | | | | | | | |
| Employee Termination / Severance and Related Benefits | | Leases and Facility Shutdown and Consolidation Costs | | Total |
| (In thousands) |
Balance at October 1, 2011 | $ | — |
| | $ | — |
| | $ | — |
|
Charges to operations | 11,618 |
| | 4,027 |
| | 15,645 |
|
Charges utilized | (1,317 | ) | | (4,027 | ) | | (5,344 | ) |
Balance at September 29, 2012 | $ | 10,301 |
| | $ | — |
| | $ | 10,301 |
|
Restructuring Plans - prior to 2012
Due to completion of all actions under restructuring plans initiated prior to 2012 and immateriality of the remaining accrual balance related to such plans, these plans have been combined for disclosure purposes. We expect to pay the majority of accrued restructuring costs by the end of 2013. In connection with these plans, we expect to incur restructuring costs in future periods associated primarily with vacant facilities until such time as those facilities have been sold or leased to third parties.
Below is a summary of restructuring costs associated with facility closures and other consolidation efforts that were implemented prior to 2012:
|
| | | | | | | | | | | |
| Employee Termination / Severance and Related Benefits | | Leases and Facility Shutdown and Consolidation Costs | | Total |
| (In thousands) |
Balance at October 3, 2009 | $ | 10,755 |
| | $ | 3,645 |
| | $ | 14,400 |
|
Charges to operations | 7,873 |
| | 16,320 |
| | 24,193 |
|
Charges utilized | (11,104 | ) | | (18,586 | ) | | (29,690 | ) |
Reversal of accrual | (2,094 | ) | | (277 | ) | | (2,371 | ) |
Balance at October 2, 2010 | 5,430 |
| | 1,102 |
| | 6,532 |
|
Charges to operations | 9,041 |
| | 19,683 |
| | 28,724 |
|
Charges utilized | (8,144 | ) | | (19,369 | ) | | (27,513 | ) |
Balance at October 1, 2011 | 6,327 |
| | 1,416 |
| | 7,743 |
|
Charges to operations | 827 |
| | 14,465 |
| | 15,292 |
|
Charges utilized | (5,776 | ) | | (12,568 | ) | | (18,344 | ) |
Balance at September 29, 2012 | $ | 1,378 |
| | $ | 3,313 |
| | $ | 4,691 |
|
Costs incurred with respect to facilities consist primarily of 1) costs to maintain vacant facilities that are owned until such facilities can be sold and 2) the portion of our lease payments that have not been recovered due to the absence of sublease income for vacant leased properties.
During 2012, in connection with restructuring plans initiated in 2011 or earlier, we recorded restructuring charges for severance and related benefits for 2 terminated employees. In 2011, we recorded restructuring charges for severance and related benefits for approximately 230 terminated employees and initiated the closure or consolidation of 2 facilities. In 2010, we recorded restructuring charges for severance and related benefits for approximately 950 terminated employees and initiated the closure or consolidation of 6 facilities.
The recognition of restructuring charges requires us to make judgments and estimates regarding the nature, timing and amount of costs associated with planned exit activities, including estimates of sublease income. Our estimates of future liabilities may change, requiring us to record additional restructuring charges or reduce the amount of liabilities already recorded.
Amortization of Intangible Assets
During 2012, 2011 and 2010, we recorded amortization of intangible assets of $3.1 million, $3.8 million and $3.6 million, respectively. Intangible assets consist primarily of intellectual property and customer relationships obtained through acquisitions. The decrease in amortization expense of $0.7 million from 2011 to 2012 was due to certain intangible assets from previous acquisitions becoming fully amortized.
Asset Impairments
During 2012, 2011 and 2010, we recorded asset impairment charges of $2.4 million, $0.5 million and 1.1 million, respectively, related to a decline in the fair value of certain properties below the carrying amount of such properties.
Gain on Sales of Long-lived Assets
During 2012, 2011 and 2010, we recognized $1.3 million, $3.5 million and $13.8 million, respectively, of gains from sales of long-lived assets, consisting primarily of buildings.
Interest Income and Expense
Interest income was $1.4 million, $1.9 million and $2.2 million in 2012, 2011 and 2010, respectively. The decrease from 2011 to 2012 was due to lower interest rates and average cash and cash equivalents balances in 2012. The decrease from 2010 to 2011 was due primarily to lower average cash and cash equivalents balances in 2011.
Interest expense was $71.7 million, $99.1 million and $108.1 million in 2012, 2011 and 2010, respectively. The decrease from 2011 to 2012 was primarily due to the redemption of $400 million of long-term debt in 2012. The decrease from 2010 to 2011 was due to repurchases of $580 million of fixed rate long-term debt in 2011, partially offset by the issuance of $500 million of variable-rate long-term debt in 2011.
Other Income (Expense), net
Other income (expense), net was $(0.3) million, $0.9 million and $41.5 million in 2012, 2011 and 2010, respectively. The following table summarizes the major components of other income (expense), net (in thousands):
|
| | | | | | | | | | | |
| Year ended |
| September 29, 2012 | | October 1, 2011 | | October 2, 2010 |
Foreign exchange gains (losses) | $ | (4,144 | ) | | $ | 435 |
| | $ | (2,490 | ) |
Gain from investments | — |
| | — |
| | 3,680 |
|
Litigation settlement | — |
| | — |
| | 35,556 |
|
Other, net | 3,853 |
| | 457 |
| | 4,792 |
|
Total | $ | (291 | ) | | $ | 892 |
| | $ | 41,538 |
|
We reduce our exposure to currency fluctuations through the use of foreign currency hedging instruments; however, hedges are established based on forecasts of foreign currency transactions. To the extent actual amounts differ from forecasted amounts, we will have exposure to currency fluctuations, resulting in foreign exchange gains or losses.
Gain (Loss) on Extinguishments of Debt
During 2012, we fully redeemed $400 million of long-term debt due in 2016 and recognized a loss on extinguishment of $16.9 million, consisting of redemption premiums of $10.9 million and a write-off of unamortized debt costs of $6.0 million.
During 2011, we repurchased or fully redeemed $580 million of our debt prior to maturity and recognized a loss on extinguishment of $16.1 million, consisting of redemption premiums of $9.4 million, third party costs of $1.3 million and a write-off of unamortized debt costs of $5.4 million.
During 2010, we repurchased or fully redeemed $195.7 million of debt prior to maturity and recognized a loss of $1.2 million, consisting primarily of unamortized debt issuance costs.
Provision for (benefit from) Income Taxes
We recorded an income tax benefit of $130.3 million in 2012 and an income tax provision of $30.6 million and $16.8 million in 2011 and 2010, respectively. Our effective tax rates were (260.9)%, 30.8% and 12.1% for 2012, 2011 and 2010, respectively. A significant component of the tax benefit for 2012 was a $158.7 million partial release of our deferred tax asset valuation allowance, as discussed further below.
Despite a 29% decrease in pre-tax income in 2011, income tax expense increased $13.8 million from 2010 due primarily to the favorable resolution of uncertain foreign tax positions in 2010 and the recognition of potential tax exposures in foreign jurisdictions in 2011.
Prior to 2012, based on historical evidence (primarily cumulative losses), we recorded a valuation allowance against our deferred tax assets in the U.S. and certain foreign jurisdictions. A valuation allowance is required to be established or maintained when, based on currently available information and other factors, it is more likely than not that all or a portion of the deferred tax assets will not be realized. We assess our valuation allowance against deferred tax assets on a regular basis. We consider all available positive and negative evidence, including future reversals of temporary differences, projected future taxable income, tax planning strategies and recent financial results. During the fourth quarter of 2012, we concluded that it was more likely than not that we would be able to realize the benefit of a portion of our deferred tax assets in the future. We based this conclusion on recent historical book and taxable income, recent global restructuring and projections of future operating income. As a result, we released $158.7 million of the valuation allowance attributable to certain U.S. deferred tax assets. We will continue to evaluate all evidence in future periods to determine if a further release of the valuation allowance is warranted.
Liquidity and Capital Resources
|
| | | | | | | | | | | |
| Year Ended |
| September 29, 2012 | | October 1, 2011 | | October 2, 2010 |
| | | (In thousands) | | |
Net cash provided by (used in): | | | | | |
Operating activities | $ | 215,413 |
| | $ | 234,908 |
| | $ | (78,334 | ) |
Investing activities | (78,027 | ) | | (98,105 | ) | | (64,295 | ) |
Financing activities | (366,813 | ) | | (88,954 | ) | | (162,613 | ) |
Effect of exchange rate changes | (1,243 | ) | | (373 | ) | | (1,097 | ) |
Increase (decrease) in cash and cash equivalents | $ | (230,670 | ) | | $ | 47,476 |
| | $ | (306,339 | ) |
Key working capital management measures
|
| | | |
| As of |
| September 29, 2012 | | October 1, 2011 |
Days sales outstanding (1) | 58 | | 55 |
Inventory turns (2) | 7.1 | | 7.0 |
Accounts payable days (3) | 57 | | 57 |
Cash cycle days (4) | 52 | | 50 |
| |
(1) | Days sales outstanding (a measure of how quickly we collect our accounts receivable), or "DSO", is calculated as the ratio |
of average accounts receivable, net, to average daily net sales for the quarter.
| |
(2) | Inventory turns (annualized) are calculated as the ratio of four times our cost of sales for the quarter to average |
inventory.
| |
(3) | Accounts payable days (a measure of how quickly we pay our suppliers), or "DPO", is calculated as the ratio of 365 days to accounts payable turns, in which accounts payable turns is calculated as the ratio of four times our cost of sales for the quarter to average accounts payable. |
| |
(4) | Cash cycle days is calculated as the ratio of 365 days to inventory turns, plus days sales outstanding minus accounts |
payable days.
Cash and cash equivalents were $409.6 million at September 29, 2012 and $640.3 million at October 1, 2011. Our cash levels vary during any given period depending on the timing of collections from customers and payments to suppliers, the extent and timing of borrowing activities and other factors. Working capital was $1.1 billion at September 29, 2012 and $1.4 billion at October 1, 2011.
Net cash provided by (used in) operating activities was $215.4 million, $234.9 million and $(78.3) million for 2012, 2011 and 2010, respectively. Cash flows from operating activities consists of: 1) net income (loss) adjusted to exclude non-cash items such as depreciation and amortization, stock-based compensation expense, etc., and 2) changes in net operating assets, which are comprised of accounts receivable, inventories, prepaid expenses and other assets, accounts payable, accrued liabilities and other long-term liabilities.
During 2012, we generated $163.3 million of cash from net income, excluding non-cash items, and $52.1 million of cash from the reduction of our net operating assets, resulting primarily from a decrease in inventories and accounts receivable of $63.4 million and $12.9 million, respectively, partially offset by a decrease in accounts payable of $48.4 million. These decreases were caused primarily by decreased business volume in 2012. AP days (a measure of how quickly we pay our suppliers) were 57 days for both periods and inventory turns were 7.1 and 7.0 for 2012 and 2011, respectively. Our DSO (a measure of how quickly we collect our accounts receivable) increased from 55 days at October 1, 2011 to 58 days at September 29, 2012. The increase resulted primarily from a change in the composition of accounts receivable from customers with shorter payment terms to customers with longer payment terms, partially offset by a favorable shift in the linearity of shipments.
In 2011, we generated $201.9 million of cash from net income, excluding non-cash items, and $33.0 million of cash from the reduction of our net operating assets, resulting primarily from an increase in accounts payable of $71.2 million, partially offset by an increase in inventories of $46.8 million. Accounts payable increased primarily as a result of increased materials purchases and a change in the composition of accounts payable from suppliers with which we have shorter payment terms to suppliers with which we have longer payment terms. As a result of these factors, our DPO increased from 55 days at October 2, 2010 to 57 days at October 1, 2011. Inventories increased as a result of purchases to support customer forecast requirements that were re-scheduled after the materials had been received. This resulted in inventory turns decreasing from 7.3 turns at October 2, 2010 to 7.0 turns at October 1, 2011. Our DSO increased from 52 days at October 2, 2010 to 55 days at October 1, 2011. The increase resulted primarily from a change in the composition of accounts receivable from customers with shorter payment terms to customers with longer payment terms, partially offset by better collection performance.
Net cash used in investing activities was $78.0 million, $98.1 million and $64.3 million for 2012, 2011 and 2010, respectively. In 2012, we used $78.6 million of cash for capital expenditures, received proceeds of $4.8 million from asset sales, primarily a property that was held-for-sale, and made payments of $5.0 million in connection with business combinations. In 2011, we used $107.6 million of cash for capital expenditures, received proceeds of $24.1 million from asset sales, primarily five properties that were held-for-sale, and made payments of $14.7 million in connection with previous business combinations.
Net cash used in financing activities was $366.8 million, $89.0 million and $162.6 million for 2012, 2011 and 2010, respectively. In 2012, we fully redeemed $400 million of our 2016 Notes for $410.8 million and received net proceeds of $39.5 million in connection with the issuance of $40 million of secured debt. In 2011, we received net proceeds of $489.0 million in connection with the issuance of $500 million of long-term debt. Additionally, we paid $590.6 million in connection with the redemption of $580 million of long-term debt.
As of September 29, 2012, we had $857.4 million of total debt outstanding under various debt instruments, a net reduction of $360.2 million from October 1, 2011.
Senior Notes Due 2019. During 2011, we issued $500.0 million aggregate principal amount of senior notes due 2019 (the "2019 Notes"). The 2019 Notes mature on May 15, 2019 and bear interest at an annual rate of 7%, payable semi-annually in arrears in cash.
The 2019 Notes are senior unsecured obligations and are fully and unconditionally guaranteed on a senior, unsecured basis by substantially all of our domestic subsidiaries. We may redeem all or any portion of the 2019 Notes at any time prior to May 15, 2014, at par plus accrued and unpaid interest and a make-whole premium. We may redeem all or any portion of the 2019 Notes beginning on or after May 15, 2014, at redemption prices ranging from 100% to105.25% of principal amount of the 2019 Notes, plus accrued and unpaid interest. Following a change of control, as defined, each holder of the 2019 Notes shall have the right to require us to repurchase all or any portion of such holder's 2019 Notes at a purchase price equal to 101% of the principal amount, plus accrued and unpaid interest.
We entered into an interest rate swap to hedge our exposure to changes in the fair value of the 2019 Notes resulting from changes in interest rates. The swap agreement, with a notional amount of $500 million and an expiration date of May 15, 2019, was entered into contemporaneously with the 2019 Notes and effectively converts these notes from fixed-rate debt to variable-rate debt. Pursuant to the interest rate swap, we pay the swap counterparty a variable rate equal to the three-month LIBOR plus a spread and receive a fixed rate of 7.0% from the swap counterparty. In accordance with Accounting Standards Codification (ASC) Topic 815, Derivatives and Hedging, the interest rate swap is accounted for as a fair value hedge but is exempt from periodic assessment of hedge effectiveness.
Senior Floating Rate Notes. In 2007, we issued $300 million of Senior Floating Rate Notes due June 15, 2014 (the “2014 Notes”). The notes bear interest at a rate per annum, reset in full quarterly, equal to the three-month LIBOR plus 2.75%. We have repurchased $42.6 million of the 2014 Notes since their issuance in 2007.
The 2014 Notes are senior unsecured obligations and rank equal in right of payment with all of our existing and future senior unsecured debt. We may redeem the 2014 Notes in whole or in part at par plus accrued and unpaid interest.
The interest rate on the 2014 Notes has been converted to a fixed rate of 8.344% through the use of interest rate swaps which are being accounted for as cash flow hedgers. The swaps have a notional amount of $257 million and expire in June 2014.
8.125% Senior Subordinated Notes. During 2006, we issued $600 million of 8.125% Senior Subordinated Notes due 2016 (the “2016 Notes”). During the third quarter of 2011, we redeemed $200 million of the notes and fully redeemed all remaining outstanding 2016 Notes during 2012 in two separate transactions using primarily cash on hand.
Secured Debt. During the fourth quarter of 2012, we borrowed $40.0 million using our corporate campus as collateral. The loan matures in 2015, bears interest at LIBOR plus a spread or the bank's prime rate plus a spread, and includes two one-year renewal options subject to lender's approval.
Asset-backed Lending Facility. In 2009, we entered into a Loan, Guaranty and Security Agreement, among us, the financial institutions party thereto from time to time as lenders, and Bank of America, N.A., as agent for such lenders. During the second quarter of 2012, we entered into an Amended and Restated Loan, Guaranty and Security Agreement (the “Loan Agreement”), among us, the financial institutions party thereto from time to time as lenders, and Bank of America, N.A., as agent for such lenders. The Loan Agreement amended and restated our existing Loan, Guaranty and Security Agreement. We incurred $2.7 million of debt issuance costs in connection with this amendment. Such costs are included in other non-current assets on the consolidated balance sheet and are being amortized to interest expense over the life of the facility on a straight-line basis.
The Loan Agreement provides for a $300 million secured asset-backed revolving credit facility with a $100 million letter of credit sublimit. The facility may be increased by an additional $200.0 million upon obtaining additional commitments from the lenders then party to the Loan Agreement or new lenders. The Loan Agreement expires on earlier of (i) the date that is 90 days prior to the maturity date of our 2014 Notes if such notes are not repaid, redeemed, defeased, refinanced or reserved for under the borrowing base under the Loan Agreement prior to such date, or (ii) March 16, 2017 (the “Maturity Date”).
Loans may be advanced under the Loan Agreement based on a borrowing base derived from specified percentages of the value of eligible accounts receivable and inventory. The borrowing base is subject to certain customary reserves and eligibility criteria. If, at any time, the aggregate principal amount of the loans outstanding plus the face amount of undrawn letters of credit under the Loan Agreement exceed the borrowing base then in effect, we must make a payment or post cash collateral (in the case of letters of credit) in an amount sufficient to eliminate such excess. As of September 29, 2012, there were no borrowings under this facility, $23.1 million in letters of credit were outstanding and we were eligible to borrow $232.0 million.
Loans under the Loan Agreement bear interest, at our option, at a rate equal to LIBOR or a base rate equal to Bank of
America, N.A.'s announced prime rate, in each case plus a spread. A commitment fee accrues on any unused portion of the commitments under the Loan Agreement at a rate per annum based on usage. Interest on loans is payable quarterly in arrears with respect to base rate loans and at the end of an interest period in the case of LIBOR loans. Principal, together with accrued and unpaid interest, is due on the Maturity Date. Our obligations under the Loan Agreement are secured by certain accounts receivable and other assets.
Short-term Debt
As of September 29, 2012, certain of our foreign subsidiaries had a total of $128.0 million of short-term borrowing facilities, under which $60.0 million was outstanding. Borrowings under these facilities bear interest at a rate equal to LIBOR plus a spread. These facilities expire at various dates through the end of 2013.
Other than our $40 million loan which used certain of our real property as collateral, our debt agreements do not contain financial covenants currently applicable to us, but do include a number of restrictive covenants, including restrictions on incurring additional debt, making investments and other restricted payments, selling assets, paying dividends and redeeming or repurchasing capital stock and debt, subject to certain exceptions. Our $40 million loan requires us to maintain a minimum fixed charge coverage ratio during its term. These covenants could constrain our ability to grow our business through acquisition or engage in other transactions which the covenants would otherwise restrict, including refinancing our existing debt. In addition, such agreements include covenants requiring, among other things, that we file quarterly and annual financial statements with the SEC, comply with all laws, pay all taxes and maintain casualty insurance. If we are not able to comply with all of these covenants, for any reason, some or all of our outstanding debt as well as all amounts payable under our interest rate swaps on such debt, if any, could become immediately due and payable and the incurrence of additional debt under our asset-backed credit facility would not be allowed, any of which could have a material adverse effect on our liquidity and ability to conduct our business.
Other Liquidity Matters
In the ordinary course of business, we are or may become party to legal proceedings, claims and other contingencies, including environmental and employee matters and examinations by government agencies. As of September 29, 2012, we had accrued liabilities of $18.5 million related to such matters. We cannot accurately predict the outcome of these matters or the amount or timing of cash flows that may be required to defend ourselves or to settle such matters or that these accruals will be sufficient to fully satisfy our contingent liabilities.
As of September 29, 2012, we had a long-term liability of $79.4 million for uncertain tax positions. Our estimate of our liabilities for uncertain tax positions is based on a number of subjective assessments, including the likelihood of a tax obligation being assessed, the amount of taxes (including interest and penalties) that would ultimately be payable, and our ability to settle any such obligations on favorable terms. Therefore, the amount of future cash flows associated with uncertain tax positions may be significantly higher or lower than our recorded liability. Additionally, we are unable to reliably estimate when cash settlement may occur.
We have entered into, and continue to enter into, various transactions that periodically require collateral. These obligations have historically arisen from customs, import/export, VAT, utility services, debt financing, foreign exchange contracts and interest rate swaps. We have collateralized, and may from time to time collateralize, such obligations as a result of counterparty requirements or for economic reasons. As of September 29, 2012, we had collateral of $12.0 million in the form of cash against certain of our collateralized obligations. Cash used for collateral reduces our cash available for other purposes.
The interest rate swap on our 2019 Notes can be terminated at the option of the swap counterparty beginning in 2014. In such a case, we would no longer pay a variable rate of interest on such notes but would instead pay a fixed rate of 7%, which could be higher than the variable rate at the time of termination.
As of September 29, 2012, we were actively marketing a number of properties for sale. These properties are listed for sale at over $100 million. However, there can be no assurance as to when we will be able to sell these properties, the amount we will realize upon sale of the properties, or if we will be able to sell them at all.
Our next long-term debt maturity is in 2014. We may, however, consider early redemptions of our debt, possibly using cash or proceeds from additional debt or equity financings. In addition to our existing covenant requirements, future debt financing may require us to comply with financial ratios and covenants. Any equity financing may result in dilution to existing stockholders.
Our liquidity needs are largely dependent on changes in our working capital, including the extension of trade credit by our suppliers, investments in manufacturing inventory, facilities and equipment, repayments of obligations under outstanding indebtedness and repurchases of our outstanding debt. Our primary sources of liquidity as of September 29, 2012 included 1) cash of $409.6 million; 2) our $300 million asset-backed credit facility, of which we were eligible to borrow $232 million; 3) short-term borrowing facilities of $128 million, of which $68 million was available; and 4) cash generated from operations. In addition, we are actively marketing a portfolio of surplus real estate with an aggregate list price of over $100 million. Proceeds from the sales of properties in this portfolio will provide additional liquidity. However, there can be no assurance as to the amount that may actually be raised.
We believe our existing cash resources and other sources of liquidity, together with cash generated from operations, will be sufficient to meet our working capital requirements through at least the next 12 months. Should demand for our services decrease significantly over the next 12 months or should we experience increases in delinquent or uncollectible accounts receivable, our cash provided by operations would be adversely impacted.
As of September 29, 2012, approximately 45% of our cash balance was held outside of the U.S. by our foreign subsidiaries. Certain foreign countries impose taxes and penalties on such transfers of cash. Should we choose or need to remit cash to the U.S., we could incur tax obligations which would reduce the amount of cash ultimately available to the U.S. We believe that cash held in the U.S., together with cash available under U.S. credit facilities and cash from foreign subsidiaries that could be remitted to the U.S. without tax consequences, will be sufficient to meet our U.S. liquidity needs for at least the next twelve months.
Contractual Obligations
The following is a summary of our long-term debt, including interest, and operating lease obligations as of September 29, 2012:
|
| | | | | | | | | | | | | | | | | | | |
| | | Payments Due by Period |
Contractual Obligations | Total | | Less than 1 year | | 1- 3 years | | 3-5 years | | More than 5 years |
| (In thousands) |
Long-term debt, including interest | $ | 981,831 |
| | $ | 44,412 |
| | $ | 358,221 |
| | $ | 43,696 |
| | $ | 535,502 |
|
Operating leases | 103,392 |
| | 26,165 |
| | 28,461 |
| | 18,545 |
| | 30,221 |
|
Total contractual obligations | $ | 1,085,223 |
| | $ | 70,577 |
| | $ | 386,682 |
| | $ | 62,241 |
| | $ | 565,723 |
|
Interest included above is based on our actual rate after considering both the underlying contractual rate and related interest rate swaps.
We also have outstanding firm purchase orders with certain suppliers for the purchase of inventory. These purchase orders are generally short-term in nature. Orders for standard, or catalog, items can typically be canceled with little or no financial penalty. Our policy regarding non-standard or customized items dictates that such items are only ordered specifically for customers who have contractually assumed liability for the inventory. In addition, a substantial portion of catalog items covered by our purchase orders are procured for specific customers based on their purchase orders or a forecast under which the customer has contractually assumed liability for such material. Accordingly, the amount of liability from purchase obligations under these purchase orders is not expected to be significant or meaningful. As of September 29, 2012, we had an insignificant amount of capital lease obligations.
As of September 29, 2012, we were unable to reliably estimate when cash settlements with taxing authorities may occur with respect to our unrecognized tax benefits of $79.4 million. Additionally, we have provided guarantees to various third parties in the form of letters of credit totaling $23.1 million as of September 29, 2012. The letters of credit cover various guarantees including workers' compensation claims and customs duties. Lastly, we have defined benefit pension plans with an underfunded amount of $19.5 million at September 29, 2012. We will be required to provide additional funding to these plans in the future if our returns on plan assets are not sufficient to meet our funding obligations. None of the amounts described in this paragraph are included in the table above.
Off-Balance Sheet Arrangements
As of September 29, 2012, we did not have any off-balance sheet arrangements, as defined in Item 303(a)(4)(ii) of Regulation S-K promulgated by the SEC, that have or are reasonably likely to have a current or future effect on our financial condition, changes in our financial condition, revenues, or expenses, results of operations, liquidity, capital expenditures, or capital resources that is material to investors.
Quarterly Results (Unaudited)
The following tables contain selected unaudited quarterly financial data for 2012 and 2011. In management's opinion, the unaudited data has been prepared on the same basis as the audited information and includes all adjustments (consisting only of normal recurring adjustments) necessary for a fair presentation of the data for the periods presented. Our results of operations have varied and may continue to fluctuate significantly from quarter to quarter. The results of operations in any period should not be considered indicative of the results to be expected from any future period.
|
| | | | | | | | | | | | | | | | |
| Year ended September 29, 2012 | |
| First Quarter | | Second Quarter | | Third Quarter | | Fourth Quarter | |
| (In thousands, except per share data) | |
Net sales | $ | 1,502,366 |
| | $ | 1,463,082 |
| | $ | 1,549,302 |
| | $ | 1,578,584 |
| |
Gross profit | $ | 109,025 |
| | $ | 106,348 |
| | $ | 105,252 |
| | $ | 115,157 |
| |
Gross margin | 7.3 | % | | 7.3 | % | | 6.8 | % | | 7.3 | % | |
Operating income | $ | 39,688 |
| | $ | 30,208 |
| | $ | 35,394 |
| | $ | 32,200 |
| |
Operating margin | 2.6 | % | | 2.1 | % | | 2.3 | % | | 2.0 | % | |
Net income (loss) | $ | 8,575 |
| | $ | (1,439 | ) | | $ | 8,948 |
| | $ | 164,150 |
| (1) |
Basic net income (loss) per share | $ | 0.11 |
| | $ | (0.02 | ) | | 0.11 |
| | $ | 2.01 |
| |
Diluted net income (loss) per share | $ | 0.10 |
| | $ | (0.02 | ) | | 0.11 |
| | $ | 1.96 |
| |
| | | | | | | | |
|
| | | | | | | | | | | | | | | |
| Year ended October 1, 2011 |
| First Quarter | | Second Quarter | | Third Quarter | | Fourth Quarter |
| (In thousands, except per share data) |
Net sales | $ | 1,662,451 |
| | $ | 1,569,058 |
| | $ | 1,674,200 |
| | $ | 1,696,702 |
|
Gross profit | $ | 128,047 |
| | $ | 116,831 |
| | $ | 131,601 |
| | $ | 133,872 |
|
Gross margin | 7.7 | % | | 7.4 | % | | 7.9 | % | | 7.9 | % |
Operating income | $ | 60,955 |
| | $ | 44,634 |
| | $ | 52,907 |
| | $ | 53,501 |
|
Operating margin | 3.7 | % | | 2.8 | % | | 3.2 | % | | 3.2 | % |
Net income | $ | 28,359 |
| | $ | 13,065 |
| | $ | 9,405 |
| | $ | 18,088 |
|
Basic net income per share | $ | 0.36 |
| | $ | 0.16 |
| | $ | 0.12 |
| | $ | 0.22 |
|
Diluted net income per share | $ | 0.34 |
| | $ | 0.16 |
| | $ | 0.11 |
| | $ | 0.22 |
|
(1) During the fourth quarter of 2012, we concluded that it was more likely than not that we would be able to realize the benefit of a portion of our deferred tax assets in the future. As a result, we released $158.7 million of the valuation allowance attributable to certain U.S. deferred tax assets.
Item 7A. Quantitative and Qualitative Disclosures about Market Risk
Interest Rate Risk
Our primary exposure to market risk for changes in interest rates relates to certain of our outstanding debt obligations. As of September 29, 2012, we had $797.4 million of long-term debt, of which $40 million bears interest at a floating rate, $257.4 million of variable rate debt has been converted to fixed rate through the use of interest rate swaps and $500 million of fixed rate debt has been converted to variable rate debt through the use of an interest rate swap. Accordingly, our exposure to interest rates is limited to variable rate long-term debt of $540 million and $60 million of variable-rate short-term borrowings outstanding as of September 29, 2012.
We are also exposed to market risk for changes in interest rates on our investment portfolio, which consists of highly liquid investments with maturities of three months or less from our original date of purchase. Currently, we do not use derivative financial instruments in our investment portfolio. We invest in high quality credit issuers and, by policy, limit the amount of principal exposure with any one issuer. As stated in our policy, we seek to ensure the safety and preservation of our invested principal funds by limiting default and market risk.
We seek to mitigate default risk by investing in high quality credit securities and by positioning our investment portfolio to respond to a significant reduction in credit rating of any investment issuer, guarantor or depository. We seek to mitigate market risk by limiting the principal and investment term of funds held with any one issuer and by investing funds in marketable securities with active secondary or resale markets.
The effect of an immediate 10% change in interest rates would not have a significant impact on our results of operations.
Foreign Currency Exchange Risk
We transact business in foreign countries. Our foreign exchange policy requires that we take certain steps to limit our foreign exchange exposures resulting from certain assets and liabilities and forecasted cash flows. However, our policy does not require us to hedge all foreign exchange exposures. Furthermore, our foreign currency hedges are based on forecasted transactions and estimated balances, the amount of which may differ from that actually incurred. As a result, we can experience foreign exchange rate gains and losses in our results of operations.
Our primary foreign currency cash flows are in certain Asian and European countries, Israel and Mexico. We enter into short-term foreign currency forward contracts to hedge currency exposures associated with certain monetary assets and liabilities denominated in foreign currencies. These contracts typically have maturities of up to two months and are not designated as part of a hedging relationship in accordance with ASC Topic 815. All outstanding foreign currency forward contracts are marked-to-market at the end of the period with unrealized gains and losses included in other income (expense), net, in the consolidated statements of income. As of September 29, 2012, we had outstanding foreign currency forward contracts to exchange various foreign currencies for U.S. dollars in the aggregate notional amount of $292.5 million.
We also utilize foreign currency forward contracts to hedge certain operational (“cash flow”) exposures resulting from changes in foreign currency exchange rates. Such exposures result from 1) forecasted sales denominated in currencies other than those used to pay for materials and labor and 2) anticipated capital expenditures denominated in a currency other than the functional currency of the entity making the expenditures. In addition, we also hedge capital expenditures related to certain plant expansions in Asia. These contracts are up to twelve months in duration and are accounted for as cash flow hedges under ASC Topic 815. The effective portion of changes in the fair value of the contracts is recorded in stockholders' equity as a separate component of accumulated other comprehensive income and recognized in earnings when the hedged item affects earnings. We had forward contracts related to cash flow hedges in various foreign currencies in the aggregate notional amount of $123.1 million as of September 29, 2012.
The net impact of an immediate 10% change in exchange rates would not be material to our consolidated financial statements, provided we accurately forecast and estimate our foreign currency exposure. If such forecasts are materially inaccurate, we could incur significant gains or losses.
Item 8. Financial Statements and Supplementary Data
The information required by this item is included below and incorporated by reference from the financial statement schedule included in “Part IV-Item 15(a)(2)” and the selected quarterly financial data referred to in “Part II-Item 7-
Management's Discussion and Analysis of Financial Condition and Results of Operations-Quarterly Results (Unaudited).”
Report of Independent Registered Public Accounting Firm
The Board of Directors and Stockholders
Sanmina Corporation:
We have audited the accompanying consolidated balance sheets of Sanmina Corporation and subsidiaries (the Company) as of September 29, 2012 and October 1, 2011, and the related consolidated statements of income, comprehensive income, stockholders' equity, and cash flows for each of the years in the three-year period ended September 29, 2012. In connection with our audits of the consolidated financial statements, we also have audited the financial statement schedule of valuation and qualifying accounts as set forth under Item 15. We also have audited the Company's internal control over financial reporting as of September 29, 2012, based on criteria established in Internal Control - Integrated Framework, issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company's management is responsible for these consolidated financial statements and financial statement schedule, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management's Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule and an opinion on the Company's internal control over financial reporting based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the consolidated financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audits of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures, as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.
A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Sanmina Corporation and subsidiaries as of September 29, 2012 and October 1, 2011, and the results of their operations and their cash flows for each of the years in the three-year period ended September 29, 2012, in conformity with U.S. generally accepted accounting principles. Also in our opinion, the related financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein. Also in our opinion, Sanmina Corporation maintained, in all material respects, effective internal control over financial reporting as of September 29, 2012, based on criteria established in Internal Control - Integrated Framework, issued by the Committee of Sponsoring Organizations of the Treadway Commission.
/s/ KPMG LLP
Santa Clara, California
November 20, 2012
SANMINA CORPORATION
CONSOLIDATED BALANCE SHEETS
|
| | | | | | | |
| As of |
| September 29, 2012 | | October 1, 2011 |
| (In thousands, except par value) |
ASSETS | | | |
Current assets: | | | |
Cash and cash equivalents | $ | 409,618 |
| | $ | 640,288 |
|
Accounts receivable, net of allowances of $12,032 and $14,537, respectively | 1,001,543 |
| | 1,014,121 |
|
Inventories | 826,539 |
| | 891,325 |
|
Prepaid expenses and other current assets | 88,599 |
| | 83,512 |
|
Total current assets | 2,326,299 |
| | 2,629,246 |
|
Property, plant and equipment, net | 569,365 |
| | 588,097 |
|
Other | 272,122 |
| | 136,630 |
|
Total assets | $ | 3,167,786 |
| | $ | 3,353,973 |
|
LIABILITIES AND STOCKHOLDERS' EQUITY | |
| | |
|
Current liabilities: | |
| | |
|
Accounts payable | $ | 937,737 |
| | $ | 984,014 |
|
Accrued liabilities | 104,741 |
| | 109,478 |
|
Accrued payroll and related benefits | 117,074 |
| | 112,193 |
|
Short-term debt | 59,995 |
| | 60,200 |
|
Total current liabilities | 1,219,547 |
| | 1,265,885 |
|
Long-term liabilities: | | | |
Long-term debt | 837,364 |
| | 1,182,308 |
|
Other | 147,094 |
| | 135,263 |
|
Total long-term liabilities | 984,458 |
| | 1,317,571 |
|
Commitments and contingencies (Note 8) |
|
| |
|
|
Stockholders' equity: |
|
| |
|
|
Preferred stock, $.01 par value, authorized 5,000 shares, none issued and outstanding | — |
| | — |
|
Common stock, $.01 par value, authorized 166,667 shares, 94,971 and 94,035 shares issued, respectively, and 81,635 and 80,734 shares outstanding, respectively | 817 |
| | 807 |
|
Treasury stock, 13,336 and 13,301 shares, respectively, at cost | (214,133 | ) | | (213,828 | ) |
Additional paid-in capital | 6,074,524 |
| | 6,053,940 |
|
Accumulated other comprehensive income | 63,479 |
| | 70,738 |
|
Accumulated deficit | (4,960,906 | ) | | (5,141,140 | ) |
Total stockholders' equity | 963,781 |
| | 770,517 |
|
Total liabilities and stockholders' equity | $ | 3,167,786 |
| | $ | 3,353,973 |
|
See accompanying notes to the consolidated financial statements.
SANMINA CORPORATION
CONSOLIDATED STATEMENTS OF INCOME
|
| | | | | | | | | | | |
| Year Ended |
| September 29, 2012 | | October 1, 2011 | | October 2, 2010 |
| (In thousands, except per share amounts) |
| |
Net sales | $ | 6,093,334 |
| | $ | 6,602,411 |
| | $ | 6,318,691 |
|
Cost of sales | 5,657,552 |
| | 6,092,060 |
| | 5,835,701 |
|
Gross profit | 435,782 |
| | 510,351 |
| | 482,990 |
|
Operating expenses: | | | | | |
Selling, general and administrative | 240,863 |
| | 247,127 |
| | 252,534 |
|
Research and development | 21,899 |
| | 20,802 |
| | 13,004 |
|
Restructuring and integration costs | 31,371 |
| | 29,609 |
| | 21,822 |
|
Amortization of intangible assets | 3,067 |
| | 3,831 |
| | 3,555 |
|
Asset impairments | 2,390 |
| | 450 |
| | 1,100 |
|
Gain on sales of long-lived assets | (1,298 | ) | | (3,465 | ) | | (13,824 | ) |
Total operating expenses | 298,292 |
| | 298,354 |
| | 278,191 |
|
| | | | | |
Operating income | 137,490 |
| | 211,997 |
| | 204,799 |
|
| | | | | |
Interest income | 1,425 |
| | 1,861 |
| | 2,246 |
|
Interest expense | (71,744 | ) | | (99,114 | ) | | (108,144 | ) |
Other income (expense), net | (291 | ) | | 892 |
| | 41,538 |
|
Loss on extinguishments of debt | (16,937 | ) | | (16,098 | ) | | (1,197 | ) |
Interest and other income (expense), net | (87,547 | ) | | (112,459 | ) | | (65,557 | ) |
Income before income taxes | 49,943 |
| | 99,538 |
| | 139,242 |
|
Provision for (benefit from) income taxes | (130,291 | ) | | 30,621 |
| | 16,807 |
|
Net income | $ | 180,234 |
| | $ | 68,917 |
| | $ | 122,435 |
|
| | | | | |
Net income per share: | | | | | |
Basic | $ | 2.22 |
| | $ | 0.86 |
| | $ | 1.55 |
|
Diluted | $ | 2.16 |
| | $ | 0.83 |
| | $ | 1.48 |
|
| | | | | |
Weighted-average shares used in computing per share amounts: | | | | | |
Basic | 81,284 |
| | 80,345 |
| | 79,195 |
|
Diluted | 83,495 |
| | 83,158 |
| | 82,477 |
|
See accompanying notes to the consolidated financial statements.
SANMINA CORPORATION
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
|
| | | | | | | | | | | |
| Year Ended |
| September 29, 2012 | | October 1, 2011 | | October 2, 2010 |
| (In thousands) |
| |
Net income | $ | 180,234 |
| | $ | 68,917 |
| | $ | 122,435 |
|
Other comprehensive income: | | | | | |
Net unrealized gain (loss) on derivative financial instruments, net of tax | 6,474 |
| | 6,978 |
| | (5,373 | ) |
Foreign currency translation adjustments | (2,543 | ) | | 5,419 |
| | 10,996 |
|
Changes in unrecognized net actuarial loss and unrecognized transition costs, net of tax | (11,190 | ) | | 4,124 |
| | (3,756 | ) |
Comprehensive income | $ | 172,975 |
| | $ | 85,438 |
| | $ | 124,302 |
|
See accompanying notes to the consolidated financial statements.
SANMINA CORPORATION
CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY
|
| | | | | | | | | | | | | | | | | | | | | | | | | |
| Common Stock and Additional Paid-in Capital | | Treasury Stock | | | | | | |
| Number of Shares | | Amount | | Number of Shares | | Amount | | Accumulated Other Comprehensive Income | | Accumulated Deficit | | Total |
| (In thousands) |
BALANCE AT OCTOBER 3, 2009 | 91,914 |
| | $ | 6,012,932 |
| | (13,348 | ) | | $ | (213,720 | ) | | $ | 52,350 |
| | $ | (5,332,492 | ) | | $ | 519,070 |
|
Issuances under stock plans | 1,160 |
| | 3,821 |
| | — |
| | — |
| | — |
| | — |
| | 3,821 |
|
Cumulative translation adjustment | — |
| | — |
| | — |
| | — |
| | 10,996 |
| | — |
| | 10,996 |
|
Unrealized loss on derivative financial instruments, net of tax | — |
| | — |
| | — |
| | — |
| | (5,373 | ) | | — |
| | (5,373 | ) |
Changes in unrecognized net actuarial loss and unrecognized transition costs, net of tax | — |
| | — |
| | — |
| | — |
| | (3,756 | ) | | — |
| | (3,756 | ) |
Stock-based compensation | — |
| | 15,167 |
| | — |
| | — |
| | — |
| | — |
| | 15,167 |
|
Issuances (repurchases) of treasury stock | — |
| | 51 |
| | (4 | ) | | (810 | ) | | — |
| | — |
| | (759 | ) |
Net income | — |
| | — |
| | — |
| | — |
| | — |
| | 122,435 |
| | 122,435 |
|
BALANCE AT OCTOBER 2, 2010 | 93,074 |
| | $ | 6,031,971 |
| | (13,352 | ) | | $ | (214,530 | ) | | $ | 54,217 |
| | $ | (5,210,057 | ) | | $ | 661,601 |
|
Issuances under stock plans | 961 |
| | 4,603 |
| | — |
| | — |
| | — |
| | — |
| | 4,603 |
|
Cumulative translation adjustment | — |
| | — |
| | — |
| | — |
| | 5,419 |
| | — |
| | 5,419 |
|
Unrealized gain on derivative financial instruments, net of tax | — |
| | — |
| | — |
| | |