Sanmina 10-K_Sept 28, 2013
Table of Contents


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
Form 10-K
(Mark One)
[x] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended September 28, 2013
or
[ ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from                  to                 .
Commission File Number 0-21272
Sanmina Corporation
(Exact name of registrant as specified in its charter)
Delaware
 
77-0228183
(State or other jurisdiction of incorporation or organization)
 
(I.R.S. Employer Identification Number)
 
 
 
2700 N. First St., San Jose, CA
 
95134
(Address of principal executive offices)
 
(Zip Code)
Registrant's telephone number, including area code:
 (408) 964-3500
Securities registered pursuant to Section 12(b) of the Act:
Common Stock, $0.01 Par Value
Securities registered pursuant to Section 12(g) of the Act:
None
(Title of Class)
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes [ x ] No [ ]

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Securities Act. Yes [ ] No [ x ] 
 
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes [ x ] No [ ]
 
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes [ x ] No [ ]
 
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§232.405 of this chapter) is not contained herein, and will not be contained, to the best of the registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [ ] 
 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer [ x ]
 
Accelerated filer [ ]
Non-accelerated filer [ ]
 
Smaller reporting company [ ]
(Do not check if a smaller reporting company)
 
 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes [ ] No [ x ] 

The aggregate market value of the voting and non-voting common stock held by non-affiliates of the registrant was approximately $923,200,862 as of March 29, 2013, based upon the last reported sale price of the common stock on the NASDAQ Global Select Market on March 28, 2013.

As of November 12, 2013, the number of shares outstanding of the registrant's common stock was 84,221,764.
 
DOCUMENTS INCORPORATED BY REFERENCE 
Certain information is incorporated into Part III of this report by reference to the Proxy Statement for the registrant's annual meeting of stockholders to be held on March 10, 2014 to be filed with the Securities and Exchange Commission pursuant to Regulation 14A not later than 120 days after the end of the fiscal year covered by this Form 10-K.


Table of Contents

SANMINA CORPORATION
 
INDEX
 
PART I
Item 1.
Business
Item 1A.
Risk Factors
Item 1B.
Unresolved Staff Comments
Item 2.
Properties
Item 3.
Legal Proceedings
Item 4.
Mine Safety Disclosures
PART II
Item 5.
Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
Item 6.
Selected Financial Data
Item 7.
Management's Discussion and Analysis of Financial Condition and Results of Operations
Item 7A.
Quantitative and Qualitative Disclosures About Market Risk
Item 8.
Financial Statements and Supplementary Data
Item 9.
Changes In and Disagreements With Accountants on Accounting and Financial Disclosure
Item 9A.
Controls and Procedures
Item 9B.
Other Information
PART III
Item 10.
Directors and Executive Officers of the Registrant
Item 11.
Executive Compensation
Item 12.
Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
Item 13.
Certain Relationships and Related Transactions
Item 14.
Principal Accountant Fees and Services
PART IV
Item 15.
Exhibits and Financial Statement Schedules
Signatures

2

Table of Contents


 
Item 1.  Business
 
Overview
 
Sanmina Corporation (“we” or “Sanmina”) is a leading global provider of integrated manufacturing solutions, components, products and repair, logistics and after-market services. We provide these comprehensive offerings primarily to original equipment manufacturers, or OEMs, in the following industries; communications networks, computing and storage, multimedia, industrial and semiconductor capital equipment, defense and aerospace, medical, clean technology (CleanTech) and automotive. The combination of our advanced technologies, extensive manufacturing expertise and economies of scale enables us to meet the specialized needs of our customers in a cost-effective manner. We were originally incorporated in Delaware in May 1989.
 
Our end-to-end solutions, combined with our global expertise in supply chain management, enable us to manage our customers' products throughout their life cycles. These services include:
 
product design and engineering, including initial development, detailed design, prototyping, validation, preproduction services and manufacturing design release; 
manufacturing of components, subassemblies and complete systems; 
final system assembly and test; 
direct order fulfillment and logistics services;
after-market product service and support; and
global supply chain management.

We participate in the Electronics Manufacturing Services (EMS) industry and manage our operations as two businesses:

1)
Integrated Manufacturing Solutions (IMS). IMS is a reportable segment consisting of printed circuit board assembly and test, final system assembly and test, and direct-order-fulfillment. This segment generated 80% of our total revenue in 2013.

2)
Components, Products and Services (CPS). Components include interconnect systems (printed circuit board fabrication, backplane and cable assemblies) and mechanical systems (enclosures, precision machining and plastic injection molding); Products include memory and solid state drive products from Viking Technology, defense and aerospace products from SCI Technology, storage products from Newisys and optical and RF (Radio Frequency) modules; and Services include design, engineering, logistics and repair services. CPS generated 20% of our total revenue in 2013.

We have facilities in 25 countries on six continents. We locate our facilities near our customers and our customers' end markets in major centers for the electronics industry or in lower cost locations. Many of our operations located near our customers and their end markets are focused primarily on new product introduction, lower-volume, higher-complexity component and subsystem manufacturing and assembly, and final system assembly and test, while our plants located in lower cost areas engage primarily in higher-volume, less-complex component and subsystem manufacturing and assembly.
 
We have become one of the largest global manufacturing solutions providers by capitalizing on our competitive strengths including our:
 
end-to-end services; 
product design and engineering resources; 
vertically integrated manufacturing solutions; 
advanced technologies;
global manufacturing capabilities, supported by robust IT systems and a global supplier base; 
customer-focused organization; and 
expertise in serving diverse end markets.


3

Table of Contents

Industry Overview
 
EMS companies are the principal beneficiaries of the increased use of outsourced manufacturing services by the electronics and other industries. Outsourced manufacturing refers to an OEM's use of EMS companies to manufacture their products, rather than using internal manufacturing capabilities. Historically, EMS companies generally manufactured only components or partial assemblies. As the EMS industry has evolved, OEMs have increased their reliance on EMS companies for additional, more complex manufacturing services including design services. Today, EMS companies manufacture and test complete systems and manage the entire supply chains of their customers. Industry-leading EMS companies offer end-to-end services including product design and engineering, manufacturing, final system assembly and test, direct-order-fulfillment and logistics services, after-market product service and support, and global supply chain management.
 
We believe OEMs will continue to increasingly outsource manufacturing because it allows OEMs to:
 
focus on core competencies; 
access leading design and engineering capabilities; 
improve supply chain management and purchasing power;
reduce operating costs and capital investment; 
access global manufacturing services; and   
accelerate time to market.    

 Our Business Strategy
 
Our objective is to maintain and enhance our leadership position in the technology industry. Key elements of our strategy include:

Capitalizing on Our Comprehensive Solutions. We intend to capitalize on our end-to-end solutions which we believe will allow us to sell additional solutions to our existing customers and attract new customers. Our end-to-end solutions include product design and engineering, manufacturing, final system assembly and test, direct order fulfillment and logistics services, after-market product service and support and global supply chain management. Our vertically integrated manufacturing solutions enable us to manufacture additional system components and subassemblies for our customers. When we provide a customer with a number of services, such as component manufacturing or higher value-added solutions, we are often able to improve our margins and profitability. Consequently, our goal is to increase the number of manufacturing programs for which we provide multiple solutions. To achieve this goal, our sales and marketing organization seeks to cross-sell our solutions to customers.
 
Extending Our Technology Capabilities. We rely on advanced processes and technologies to provide our products, components and vertically integrated manufacturing solutions. We continually improve our manufacturing processes and develop more advanced technologies, providing competitive advantage to our customers. We work with our customers to anticipate their future product and manufacturing requirements and align our technology investment activities with their needs. We use our design expertise to develop product technology platforms that we can customize by incorporating other components and subassemblies to meet the needs of particular OEMs. These technologies enhance our ability to manufacture complex, high-value added products, allowing us to continue to win business from existing and new customers.

Attract and Retain Long-Term Customer Partnerships. A core component of our strategy is to attract, build and retain long-term partnerships with companies in growth industries that will benefit from our global footprint and unique value proposition in advanced electronics manufacturing. As a result of this customer-centric approach, we have experienced business growth from both existing and new customers and will continue to cultivate these partnerships with additional products and value-added solutions.

Joint Design Manufacturing (JDM) Solutions. As a result of customer feedback, and our customers' desire to manage research and development expenses, we offer product design services to develop systems and components jointly with our customers. In a JDM model, our customers bring market knowledge and product requirements and we bring complete design engineering and new product introduction (NPI) services. Our design engineering offerings include product architecture, development, integration, regulatory and qualification services. Our NPI services include quick-turn prototyping, supply chain readiness, functional test development and release-to-volume production.
 

4

Table of Contents

Continuing to Penetrate Diverse End Markets. We focus our marketing and sales efforts on major end markets within the technology industry. We target markets we believe offer significant growth opportunities and for which OEMs sell complex products that are subject to rapid technological change because the manufacturing of these products requires higher value-added services. Our approach to our target markets is two-fold: strengthen our significant presence in the communications, computing and multimedia markets, and also focus on under-penetrated target markets which have not extensively relied upon outsource manufacturing companies in the past, including the medical, industrial and semiconductor capital equipment, CleanTech, automotive, and defense and aerospace industries. We intend to continue our diversification across market segments and customers to reduce our dependence on any particular market or customer.
 
Pursuing Strategic Transactions. We seek to undertake strategic transactions that give us the opportunity to access new customers' products, manufacturing solutions, repair service capabilities, technologies and geographic markets. In addition, we plan to continue to pursue OEM divestiture transactions that will augment existing strategic customer relationships with favorable supply agreement terms or build new relationships with customers in attractive end markets. Potential future transactions may include a variety of different business arrangements, including acquisitions, spin-offs, strategic partnerships, restructurings and divestitures. We will continue to evaluate and pursue strategic opportunities on a highly selective basis.
 
Continuing to Seek Cost Savings and Efficiency Improvements. We seek to optimize our facilities to provide cost-efficient services for our customers. We maintain extensive operations in lower cost locations, including Latin America, Eastern Europe, China, Southeast Asia and India, and we plan to expand our presence in these lower cost locations as appropriate to meet the needs of our customers. We believe we are well positioned to take advantage of future opportunities on a global basis as a result of our existing footprint in 25 countries on six continents.

Our Competitive Strengths

We believe our competitive strengths differentiate us from our competitors and enable us to better serve the needs of OEMs. Our competitive strengths include:
 
End-to-End Solutions. We provide solutions throughout the world to support our customers' products during their entire life cycle, from product design and engineering, through manufacturing, to direct order fulfillment, logistics and after-market product service and support. Our end-to-end solutions are among the most comprehensive in the industry because we focus on adding value before and after the actual manufacturing of our customers' products. Our end-to-end solutions enable us to provide our customers with a single source of supply for their manufacturing needs, reduce the time required to bring products to market, lower product costs and allow our customers to focus on those activities in which they expect to add the highest value. We believe that our end-to-end solutions allow us to develop closer relationships with our customers and more effectively compete for their future business.
 
Product Design and Engineering Resources. We provide product design and engineering services for new product designs, cost reductions and design-for-manufacturability (DFx) reviews. Our engineers work with our customers during the complete product life cycle. Our design and NPI centers provide turnkey system design services including: electrical, mechanical, thermal, software, layout, simulation, test development, design verification, validation, regulatory compliance and testing services. We design high-speed digital, analog, radio frequency, mixed-signal, wired, wireless, optical and electro-mechanical products.
 
Our engineering engagement models include Joint Design Manufacturing (JDM), Contract Design Manufacturing (CDM) and consulting engineering for DFx, Value Engineering (cost reduction re-design), and design for environmental compliance with the European Union's Restrictions of Hazardous Substances (RoHS) and Waste Electrical and Electronic Equipment (WEEE). We focus on industry segments that include communications networks, computing and storage, medical, multimedia, defense and aerospace, industrial and semiconductor capital equipment, CleanTech and automotive. System solutions for these industry segments are supported by our vertically integrated component technologies, namely, printed circuit boards, backplanes, enclosures, cable assemblies, precision machining, plastics and die castings, memory modules, and optical, RF and microelectronics modules.
 
In these engagement models, our customers bring market knowledge and product requirements. We provide complete design engineering and new product introductions (NPI) services. For JDM products, typically the intellectual property is jointly owned by us and the customer and we realize manufacturing revenue associated with building and shipping the product. For CDM projects, customers pay for all services and own the intellectual property.
 
Vertically Integrated Manufacturing Solutions. We provide a range of vertically integrated manufacturing solutions including high-technology components, new product introduction and test development services. These services are provided in

5

Table of Contents

every major region worldwide, with design and prototyping close to our customer’s product development centers. Our customers significantly benefit from our experience in these areas including product cost reduction, minimization of assets deployed for manufacturing, time-to-market and a simplified supply chain. Key system components we manufacture include high-technology printed circuit boards and printed circuit board assemblies, backplanes and backplane assemblies, enclosures, cable assemblies, precision machined components, optical and RF modules and memory modules. All of these components and sub-assemblies are integrated into a final product or system (HLA - High Level Assembly), configured and tested to our customer’s or the end-customer’s specifications and delivered to the final point of use, with us managing the entire supply chain. By manufacturing system components and subassemblies ourselves, we enhance continuity of supply and reduce costs for our customers. In addition, we are able to have greater control over the supply chain of our customers' products and retain incremental profit opportunities.

Customers also benefit from our combined design, technology and manufacturing experience with specific products and markets. For example, in communications networks, our 20 years of experience in developing high-speed printed circuit boards ("PCBs") and backplanes attracts major customers to us because of the higher levels of product performance achieved using our technology. Examples of products where our experience and vertically integrated model provide competitive advantage include wireless base stations, network switches, routers and gateways, optical switches, enterprise-class servers and storage appliances, set-top boxes, avionics and satellite systems, magnetic resonance imaging (MRI) and computer tomography (CT) scanners, and equipment used in semiconductor manufacturing processes, including equipment for photolithography, chemical mechanical polishing, vapor deposition and robotics for wafer transfer. For these and many other products, customers can gain competitive advantage with our technology, while reducing the capital requirements associated with manufacturing and global supply chain management.
 
Advanced Technologies. We provide services utilizing advanced technologies which we believe allow us to differentiate ourselves from our competitors. These advanced technologies include the fabrication of complex printed circuit boards, backplanes, enclosures, precision machining, plastics and die cast components. For example, we produce some of the most advanced printed circuit boards and backplanes in the world, with up to 70 layers and process capabilities including a range of low signal loss, high performance materials, buried capacitors and resistors, high-density interconnects and micro via technology. We also manufacture high-density flex and rigid-flex printed circuit boards with up to 30 layers and 8 transition layers in support of defense and aerospace markets along with high-end medical electronics.
 
Our printed circuit board assembly technologies include micro ball grid arrays, fine-pitch discretes and small form factor radio frequency and optical components, as well as advanced packaging technologies used in high pin count application-specific integrated circuits and network processors. We use innovative design solutions and advanced metal forming techniques to develop and fabricate high-performance indoor and outdoor chassis, enclosures and frames. Our assembly services use advanced technologies including precision optical alignment, multi-axis precision stages and machine vision technologies. We use sophisticated procurement and production management tools to effectively manage inventories for our customers and ourselves. We also have developed build-to-order (BTO) and configure-to-order (CTO) systems and processes that enable us to manufacture and ship finished systems within 48 to 72 hours after receipt of an order. We utilize a centralized IMS technology council to coordinate the development and introduction of new technologies to meet our customers' needs in various locations and to increase collaboration among our facilities.
 
Global Manufacturing Capabilities. Most of our customers compete and sell their products on a global basis. As such, they require global solutions that include regional manufacturing for selected end markets, especially when time to market, local manufacturing or content and low cost solutions are critical objectives. Our global network of facilities in 25 countries provides our customers a combination of sites to maximize both the benefits of regional and low cost manufacturing solutions and repair services. Our repair partners are located in an additional 21 countries.

We offer customers five regions where all of our technology and components, integrated manufacturing and logistics solutions can be implemented and can serve both regional and global business needs. To manage and coordinate our global operations, we employ an enterprise-wide ERP system at substantially all of our manufacturing locations that operates on a single IT platform and provides us with company-wide information regarding component inventories and orders. This system enables us to standardize planning and purchasing at the facility level and to optimize inventory management and utilization worldwide. Our systems also enable our customers to receive key information regarding the status of their programs.
 
We purchase large quantities of electronic components and other materials from a wide range of suppliers. Our primary supply chain goal is to consolidate our global spend to create the synergy and leverage to drive our supply base for better cost competitiveness, more favorable terms and leading-edge supply chain solutions. As a result, we often receive more favorable terms and supply chain solutions from suppliers, which can enable us to provide our customers with greater total cost reductions than they could obtain themselves. Our strong supplier relationships also often enable us to obtain electronic

6

Table of Contents

components and other materials that are in short supply as well as provide us the necessary support to optimize the use of our inventories.
 
Supply chain management also involves the planning, purchasing and warehousing of product components. The other objective of our supply chain management services is to reduce excess component inventory in the supply chain by scheduling deliveries of components at a competitive price and on a just-in-time basis. We use sophisticated production management systems to manage our procurement and manufacturing processes in an efficient and cost effective manner. We collaborate with our customers to enable us to respond to their changing component requirements and to reflect any changes in these requirements in our production management systems. These systems enable us to forecast future supply and demand imbalances and develop strategies to help our customers manage their component requirements. Our enterprise-wide ERP systems provide us with company-wide information regarding component inventories and orders to optimize inventories, planning and purchasing at the facility level.

Customer-Focused Organization. We believe customer relationships are critical to our success and we are focused on providing a high level of customer service. Our key customer accounts are managed by dedicated account teams including a global business manager directly responsible for account management. Global business managers coordinate activities across divisions to effectively satisfy our customers' requirements and have direct access to our senior management to quickly address customer opportunities and needs. Local customer account teams further support the global teams and are linked by a comprehensive communications and information management infrastructure.
 
Expertise in Serving Diverse End Markets. We have experience in serving our customers in the communications, computing and storage, multimedia, industrial and semiconductor capital equipment, defense and aerospace, medical, CleanTech and automotive markets. Our diversification across end markets reduces our dependence upon any one customer or segment. In order to cater to the specialized needs of customers in particular market segments, we have dedicated personnel, and in some cases facilities, with industry-specific capabilities and expertise. We also maintain compliance with industry standards and regulatory requirements applicable to certain markets including, among others, the medical and defense and aerospace sectors.     
 
Our Products and Solutions
 
We offer our OEM customers a diverse set of products and solutions with a focus on wireless, wireline and optical communications and network infrastructure equipment like switches, routers and base stations, computing and storage systems, defense and commercial avionics and communications, medical imaging, diagnostic and patient monitoring systems, digital satellite set-top boxes, point-of-sale, gaming systems, semiconductor tools for metrology, lithography, dry and wet processing, industrial products like large format printers and cash transaction machines, and CleanTech products such as solar and wind products, fuel cells, LED lighting, smart meters and battery systems. These products may require us to use some or all of our end-to-end solutions including design, component technologies and logistics and repair services.

Integrated Manufacturing Solutions includes:
   
Printed Circuit Board Assembly and Test. Printed circuit board assembly involves attaching electronic components, such as integrated circuits, capacitors, microprocessors, resistors and memory modules to printed circuit boards. The most common technologies used to attach components to printed circuit boards employ surface mount technology (SMT) and pin-through-hole assembly (PTH). SMT is an automated assembly system that places and solders components to the printed circuit board. In PTH, components are inserted into holes punched in the circuit board. Another method is press-fit-technology, in which components are pressed into connectors affixed to the printed circuit board. We use SMT, PTH, press-fit as well as new attachment technologies that are focused on miniaturization and increasing the density of component placement on printed circuit boards. These technologies, which support the needs of our customers to provide greater functionality in smaller products, include chip-scale packaging, ball grid array, direct chip attach and high density interconnect. We perform in-circuit and functional testing of printed circuit board assemblies. In-circuit testing verifies all components are properly inserted, attached and the electrical circuits are complete. We perform functional tests to confirm the board or assembly operates in accordance with its final design and manufacturing specifications. We either design and procure test fixtures and develop our own test software, or we use our customers' test fixtures and test software. In addition, we provide environmental stress tests of the board or assembly that are designed to confirm that the board or assembly will meet the environmental stresses, such as heat, to which it will be subject.

Final System Assembly and Test. We provide final system assembly and test in which assemblies and modules are combined to form complete, finished products. Products for which we currently provide final system assembly and

7

Table of Contents

test include wireless base stations, wireline communications switches, optical networking products, high-end servers, industrial and automotive, LED lighting fixtures, multimedia devices, diagnostic medical equipment, internet-protocol communication systems, set-top boxes and computing and storage. We often integrate Sanmina-manufactured printed circuit board assemblies with enclosures, cables and memory modules we also produce. Our final assembly activities also may involve integrating components and modules that others manufacture. The complex, finished products we produce typically require extensive test protocols. We offer both functional and environmental test services. We also test products for conformity to applicable industry, product integrity and regulatory standards. Our test engineering expertise enables us to design functional test processes that assess critical performance elements including hardware, software and reliability. By incorporating rigorous test processes into the manufacturing process, we can help assure our customers that their products will function as designed.

Direct-Order-Fulfillment. We provide direct-order-fulfillment for our OEM customers. Direct-order-fulfillment involves receiving customer orders, configuring products to quickly fill the orders and delivering the products either to the OEM, a distribution channel, such as a retail outlet, or directly to the end customer. We manage our direct-order-fulfillment processes using a core set of common systems and processes that receive order information from the customer and provide comprehensive supply chain management including procurement and production planning. These systems and processes enable us to process orders for multiple system configurations and varying production quantities including single units. Our direct-order-fulfillment services include BTO and CTO capabilities: in BTO, we build a system with the particular configuration ordered by the OEM customer; in CTO, we configure systems to an end customer's order. The end customer typically places this order by choosing from a variety of possible system configurations and options. Using advanced manufacturing processes and a real-time warehouse management and data control system on the manufacturing floor, we can meet a 48 to 72 hour turn-around-time for BTO and CTO requests. We support our direct-order-fulfillment services with logistics that include delivery of parts and assemblies to the final assembly site, distribution and shipment of finished systems and processing of customer returns. Our systems are sufficiently flexible to support direct-order-fulfillment for a variety of products, such as servers, workstations, set-top boxes and medical devices.

Components, Products and Services includes:
   
Product Design and Engineering. Our design and engineering groups provide customers with comprehensive services from initial product design and detailed product development to production launch and end-of-life support for a wide range of products covering all our market segments. These groups complement our vertically integrated manufacturing capabilities by providing manufacturing design services for printed circuit boards, backplanes and a variety of electro-mechanical systems. Our offerings in design engineering include product architecture, development, integration and regulatory and qualification services, while our NPI services include quick-turn prototype, functional test development and release-to-volume production. We specialize in creating custom high-performance, manufacturable, cost-optimized products. We can also complement our customer's design team with our unique skills and services. Both solutions accelerate our customer's market penetration, all while respecting the customer's intellectual property (IP).

Printed Circuit Boards. We have the ability to produce multilayer printed circuit boards on a global basis with high layer counts and fine line circuitry. Our ability to support NPI and quickturn fabrication followed by manufacturing in both North America and Asia allows our customers to accelerate their time-to-market as well as their time-to-volume. Standardized processes and procedures make transitioning of products easier for our customers. Our technology roadmaps provide leading-edge capabilities and higher yielding processes. Engineering teams are available on a world-wide basis to support designers in Design for Manufacturability (DFM) analysis and assemblers with field application support.
 
Printed circuit boards are made of fiberglass/resin- laminated material layers and contain copper circuits which interconnect and transmit electrical signals among the components that make up electronic devices. Increasing the density of the circuitry in each layer is accomplished by reducing the width of the circuit tracks and placing them closer together in the printed circuit board along with adding layers and via hole structures. We are currently capable of efficiently producing printed circuit boards with up to 70 layers and circuit trace widths as narrow as two mils (50 micron) in production volumes. Specialized production equipment along with an in-depth understanding of high performance laminate materials allow for fabrication of some of the largest form factor and highest speed (in excess of 20 gigabits per second, or Gbps) backplanes available in the industry. We have also developed several proprietary technologies and processes which improve electrical performance, connection densities and reliability of printed circuit boards. Some of these technologies, such as Buried Capacitance™, have become industry standards and are licensed to other board fabricators.

8

Table of Contents

 
Backplanes and Backplane Assemblies. Backplanes are very large printed circuit boards that serve as the backbones of sophisticated electronics products. They provide interconnections for printed circuit boards, integrated circuits and other electronic components. We fabricate backplanes in our printed circuit board plants. Backplane fabrication is significantly more complex than printed circuit board fabrication due to the large size and thickness of the backplanes. We manufacture backplane assemblies by press-fitting high density connectors into plated through-holes in the bare backplane. In addition, many of the newer, advanced technology backplanes require SMT attachment of passive discrete components as well as high-pin count ball grid array packages. These advanced assembly processes require specialized equipment and a strong focus on quality and process control. We also perform in-circuit and functional tests on backplane assemblies. We have developed proprietary technology and “know-how” which enable backplanes to run at data rates in excess of 10 Gbps. We currently have capabilities to manufacture backplanes with greater than 60 layers in sizes of 26x40 or 22x52 inches and up to 0.5 inches in thickness, using a wide variety of high performance laminate materials. These are among the largest and most complex commercially manufactured backplanes. We are one of a limited number of manufacturers with these capabilities.
 
Cable Assemblies. Cable assemblies are used to connect modules, assemblies and subassemblies into electronic devices. We provide a broad range of cable assembly products and services, from cable assemblies and harnesses for automobiles, to complex harnesses for industrial products and semiconductor manufacturing equipment. We design and manufacture a broad range of high-speed data, radio frequency and fiber optic cabling products. Our cable assemblies are often used in large rack systems to interconnect subsystems and modules.
 
Mechanical Systems. Mechanical systems are used across all major markets to house and protect complex and fragile electronic components, modules and sub-systems, so that the system's functional performance is not compromised due to mechanical, environmental or any other usage conditions. Our mechanical systems manufacturing services are capable of fabricating mechanical components, such as cabinets, chassis (soft tool and hard progressive tools), frames, racks, and data centers integrated with various electronic components and sub-systems for power management, thermal management, sensing functions and control systems.

We manufacture a broad range of enclosures for a wide range of products including multimedia products, set-top boxes, medical equipment, storage and servers, to large and highly complex mechanical systems, such as those used in indoor and outdoor wireless base station products and high precision chambers for semiconductor industry.

We serve a variety of market segments, such as telecommunications, computing, semiconductor, industrial, CleanTech, and medical, while partnering with customers from initial concept development, prototyping, build verification and validation, to integration, system assembly, final test and service.

Our mechanical systems expertise is readily accessible at any of our state-of-the-art facilities worldwide. Our operations provide metal fabrication by soft tools, high-volume metal stamping and forging by hard tools with stage and progressive tools, plastic injection molding, aluminum die-casting, robotic welding capabilities, powder painting, wet painting, plating, cleaning processes and leading precision machining capabilities.
 
We also offer a suite of world-class precision machining services in the U.S. and China. We use advanced numerically controlled machines enabling the manufacture of components to very tight tolerances and the assembly of these components in clean environments. Capabilities include complex medium- and large-format mill and lathe machining of aluminum, stainless steel, plastics, ferrous and nonferrous alloys and exotic alloys. We also have helium and hydrostatic leak-test capabilities. By leveraging our established supply chain, we do lapping, plating, anodizing, electrical discharge machining (EDM), heat-treating, cleaning, laser inspection, painting and packaging. We have dedicated facilities supporting machining and complex integration with access to a range of state-of-the-art, computer-controlled machining equipment that can satisfy rigorous demands for production and quality. This includes fully automated “lights-out” machinery that continues production in the absence of human operators. With some of the largest horizontal milling machines in the U.S., we are a supplier of vacuum chamber systems for the semiconductor, flat-panel display, LED equipment, industrial and AS0100-certified, aerospace markets.

Viking Technology. Viking Technology is a global provider of Non-Volatile memory, Solid State Drives (SSD) and DRAM solutions with over two decades of engineering experience and expertise in flash and DRAM modules, advanced packaging & complex sub-system solutions. Viking's mission and philosophy is to continue to deliver leading-edge technology solutions that optimize the value and performance of its customers’ applications.


9

Table of Contents

Viking's breadth of products bridge the SSD and DRAM technologies to deliver any storage solution: from high-performance computing SSDs tailored for the Enterprise market to small form factor flash and DRAM modules optimized for the industrial, communications and defense and aerospace markets.

In recent years, Viking has pioneered several disruptive technologies that are paving the way for faster and more effective enterprise server and storage system solutions. Such innovations include a new Non-Volatile memory module, ArxCis-NV™. The ArxCis-NV™, an NV-DIMM, enables significant performance improvements to a host of end applications, while delivering increased endurance to any SSD. NV-DIMM technology will be a critical component for the evolving Cloud and Virtualization markets to ensure reliability, persistence and performance. Another disruptive technology is the innovative SATADIMM™, an SSD in the form of a Dual In-Line Memory Module (DIMM). Using Viking's state-of-the-art design and packaging technology, the SATADIMM™ is able to deliver all the performance, capacity and features of an Enterprise SSD within 75% of the footprint of a traditional 2.5-inch SSD. With its innovative form factor, the SATADIMM™ enables the large growing server market to take advantage of increased performance and capacity to enhance critical business applications.

SCI Technology Inc. (SCI) - Defense and Aerospace. SCI has been providing engineering services, products and manufacturing solutions to the global defense and aerospace industry for more than five decades. SCI offers mission-critical products for aircraft systems, tactical communications and radiation detection and monitoring, as well as fiber optics capabilities for use in a variety of applications.

Our customers include U.S. government agencies, U.S. allies and major defense and aerospace prime contractors. We also have the infrastructure to support the stringent certifications, regulations, processes and procedures required by these customers.

Newisys. Our Newisys group designs and manufactures both standard and custom storage and server products, including mass storage for high performance cloud and streaming video applications, as well as bulk and backup storage products. Newisys designs and produces storage and server products, including complete rack scale solutions.

Optical and RF and Components and Modules. Optical and Radio frequency (RF) components are the key building blocks of many systems. We produce both passive and active components as well as modules. RF and Optical modules are integrated subsystems that use a combination of industry standard and/or custom components, interconnected using microelectronic technologies to achieve a unique function. Based on our microelectronic design and manufacturing technologies, we provide RF and optical components, modules and systems for customers in the telecommunications, networking, medical, industrial, military and aerospace markets. Our experience in RF and optical communications and networking products spans long-haul/ultra-long-haul and metro regions for transport/transmission, as well as access and switching applications, including last-mile solutions. In the medical market, we develop and manufacture optically-based products such as blood analyzers and food contamination analyzers as well as specialized spectrometers. We are currently supplying product to the 10G, 40G and 100G optical marketplace based on our optical and RF technologies. Our service offerings for optical customers are designed to deliver end-to-end solutions with special focus on product design and industrialization, optical and RF component, module and blade manufacturing, as well as system integration and test.

Logistics and Repair Services. Our logistics and repair services provide significant value to our customers while helping protect their brand name. It also improves customer experience through the deployment of enhanced tools and the provision of real-time access to critical business information. Our solutions are designed to reduce the total cost of ownership and enable our customers to shift their services operations to a variable cost model that frees up cash, enabling them to focus on their core business initiatives.

Focusing on highly complex and mission-critical products and processes, we support the logistics and repair needs of customers in the medical, communications, computing & storage, defense and aerospace and multimedia markets worldwide. Through our operational infrastructure of more than 20 locations and repair partners in an additional 21 countries, we provide a wide range of services including direct-order-fulfillment, configure-to-order, supplier, inventory and warranty management, reverse logistics, repair, asset recovery, sustaining engineering, test development and end-of-life management to embrace the most unique needs of our customers.

Drawing on a robust set of information systems, we offer configurable environments tailored to meet specific customer needs including customized web portals, order and serial number tracking, special routings and promotions. Local, regional and global solutions are supported by a robust set of business processes that focus on inventory reduction and risk mitigation. This can improve cycle times by leveraging infrastructure, people and

10

Table of Contents

technology to enable reliable shipments of products to end users worldwide generally within 4 to 72 hours, depending on the services offered.

Logistics and repair services complement our end-to-end manufacturing strategy by integrating engineering, supply chain, manufacturing, logistics and repairs into a seamless solution for mission-critical customers around the world.
 
Our End Markets
 
We target markets that we believe offer significant growth opportunities and for which OEMs sell complex products that are subject to rapid technological change. We believe that markets involving complex, rapidly changing products offer opportunities to produce products with higher margins because they require higher value-added manufacturing services and may also include our advanced vertically integrated components. Our approach to our target markets is two-fold; we intend to strengthen our significant presence in the communications networks and computing and storage markets, while also focusing on under-penetrated target markets which have not extensively relied upon EMS companies in the past, including the medical, automotive, industrial and semiconductor capital equipment, defense and aerospace, and CleanTech industries. Our diversification across market segments and customers helps mitigate our dependence on any particular market or customer.
 
Communications Networks: Wireless and Wireline Access, Optical and Wireline Routing, Switching, and Transmission and Enterprise Networking. In the communications sector, we focus on infrastructure equipment including wireless and wireline access, radio frequency (RF) filters, switching, routing and transmission systems, optical networking and transmission and enterprise networking systems. Our product design and engineering staff has extensive experience designing and industrializing advanced communications products and components for these markets. Products we manufacture include wireless base stations, remote radio heads, point-to-point microwave systems and other backhaul solutions, satellite receivers and various radio frequency appliances, optical switches and transmission hardware as well as switches core, service and edge routers among others. We also design and manufacture optical, RF and microelectronic components which enable devices in many of these products. 

Computing and Storage. We provide comprehensive design and manufacturing solutions, as well as BTO and CTO services to the computing and storage market. We tightly couple our vertically integrated supply chain with manufacturing and logistics allowing for assembly and distribution of products all over the world. Our vertical integration capabilities include racks, enclosures, cables, complex multi-layer printed circuit boards, printed circuit assemblies and backplanes. In addition, we have designed and developed some of the most compact and powerful storage modules available on the market today which we have coupled with our global, vertically integrated supply chain to deliver some of the most compelling computing and storage solutions to the data storage industry.
 
Multimedia. We manufacture digital set-top boxes, point of sale equipment, casino gaming equipment, digital home gateways, professional audio-video equipment and internet protocol entertainment devices. For our multimedia OEM customers, we manage the production process including product design and engineering, test development, supply chain management, manufacturing of printed circuit boards and assemblies, final system assembly and test, direct-order-fulfillment together with our BTO and CTO capabilities, and repair services.

Industrial and Semiconductor Capital Equipment. Our expertise in manufacturing highly complex systems includes production of industrial and semiconductor capital equipment, front-end environmental chambers, industrial controllers and test, inspection and public safety equipment. We also have significant experience in manufacturing highly complex systems such as process chambers, photolithography tools, etch tools, wafer handling interfaces, flat panel display test and repair equipment, chem-mech planarization tools, optical inspection and x-ray equipment, explosive detection equipment, and large format printing plate machines as well as full design and manufacturing capabilities on precision frames for all capital equipment.
 
Defense and Aerospace. We offer our end-to-end services to the defense and aerospace industry. We design and manufacture a comprehensive range of defense and aerospace products including avionics systems and processors, cockpit and wireless communications systems, tactical and secure network communications systems, radar subsystems, radiation detection systems for homeland defense and fiber-optic systems. We believe our experience in serving the defense and aerospace industry, as well as our product design and engineering capabilities, represent our key competitive strengths.

Medical. We provide comprehensive manufacturing and related services to the medical industry including design, logistics and regulatory approval support. The manufacturing of products for the medical industry often requires compliance with domestic and foreign regulations including the Food and Drug Administration's (FDA's) quality system regulations and the

11

Table of Contents

European Union's medical device directive. In addition to complying with these standards, our medical manufacturing facilities comply with ISO 13485-2012 (formerly EN 46002) and ISO 9001:2000. We manufacture a broad range of medical devices including blood glucose meters, computed tomography scanner assemblies, respiration systems, blood analyzers, cosmetic surgery systems, ultrasound imaging systems and a variety of patient monitoring equipment.

Clean Technology. We are committed to serving companies leading the CleanTech revolution in the solar, wind, fuel cell, battery systems, LED lighting and smart infrastructure industries. We leverage traditional electronics manufacturing services (EMS) for CleanTech customers in areas related to power electronics, control and distribution, smart meters and full-system integration. Beyond traditional EMS, our extensive range of electro-mechanical design and complex system manufacturing capabilities are an excellent fit across all CleanTech segments. Our design and manufacturing operations are strategically located in close proximity to CleanTech business hubs.  

 Automotive. In the automotive industry, we manufacture different types of sensors, body controllers, engine control units, radios, heating ventilation and air-conditioning (HVAC) control heads and blower modules as well as cables for entertainment solutions. We also provide design support, product and process qualification, manufacturing, supply chain management, supplier quality assurance and end-of-life services. All our automotive dedicated factories are TS 16949 certified and provide printed circuit boards, printed circuit board assemblies and cables as well as final systems.
 
Customers
 
A relatively small number of customers have historically generated a significant portion of our net sales. Sales to our ten largest customers represented approximately 50% of our net sales in 2013, 2012 and 2011. In 2013 and 2012, Alcatel-Lucent represented more than 10% of our net sales. In 2011, Nokia Siemens Networks represented more than 10% of our net sales.
 
We seek to establish and maintain long-term relationships with our customers, as we have served many of our principal customers for several years. Historically, we have had substantial recurring sales from existing customers. We also expand our customer base through our marketing and sales efforts as well as acquisitions. We have been successful in broadening relationships with customers by providing vertically integrated products and services as well as multiple products and services in multiple locations.
 
We typically enter into supply agreements with our major OEM customers with terms ranging from three to five years. Our supply agreements with our OEM customers generally do not obligate the customer to purchase minimum quantities of products. However, the customer is typically liable for the cost of the materials and components we have ordered to meet their production forecast but which are not used, provided that the material was ordered in accordance with an agreed-upon procurement plan. In some cases, the procurement plan contains provisions regarding the types of materials for which our customers will assume responsibility. Our supply agreements typically contain provisions permitting cancellation and rescheduling of orders upon notice and, in some cases, subject to cancellation and rescheduling charges. Order cancellation charges typically vary by product type, depending how far in advance of shipment a customer notifies us of an order cancellation. In some circumstances, our supply agreements with customers provide for cost reduction objectives during the term of the agreement.
 
We generally do not obtain firm, long-term commitments from our customers under supply agreements. As a result, customers can cancel their orders, change production quantities or delay orders. Uncertain economic conditions and our general lack of long-term purchase contracts with our customers make it difficult for us to accurately predict revenue over the long-term. Even in those cases in which customers are contractually obligated to purchase products from us or repurchase unused inventory from us that we have ordered for them, we may elect not to immediately enforce our contractual rights because of the long-term nature of our customer relationships or for other business reasons and may instead negotiate accommodations with customers regarding particular situations.

Seasonality

Although we have in the past experienced higher levels of sales during different quarters, we have in the recent past perceived that the second half of our fiscal year experiences higher levels of revenue, with our first half generally having the lowest levels. However, we cannot predict whether this pattern will continue as seasonality in our business has historically been driven by customer and product mix, particularly in the end markets which our customers serve.


12

Table of Contents

Backlog
 
We generally do not obtain firm, long-term commitments from our customers. Instead, our procurement of inventory and our manufacturing activities are based primarily on forecasts provided by our customers. This enables us to minimize the time lapse between receipt of a customer's order and delivery of product to the customer. Customers usually do not make firm orders for product delivery more than thirty to ninety days in advance. Additionally, customers may cancel or postpone scheduled deliveries, generally without significant penalty. Therefore, we do not believe the backlog of expected product sales covered by firm orders is a meaningful measure of future sales. 

Marketing and Sales
 
Our sales efforts are organized and managed on a regional basis with regional sales managers in geographic regions throughout the world.
 
We develop relationships with our customers and market our vertically integrated manufacturing solutions through our direct sales force, customer support specialists and representative firms. Our sales resources are directed at multiple management and staff levels within target accounts. Our direct sales personnel and representative firms work closely with the customers' engineering and technical personnel to better understand their requirements. Our marketing and sales staff supports our business strategy of providing end-to-end solutions by encouraging cross-selling of vertically integrated manufacturing solutions and component manufacturing across a broad range of major OEM products. To achieve this objective, our marketing and sales staff works closely with our various manufacturing and design and engineering groups and engages in marketing and sales activities targeted at key customer opportunities.
 
Each of our key customer accounts is managed by a dedicated account team including a global business manager directly responsible for account management. Global business managers coordinate activities across divisions to effectively satisfy customer requirements and have direct access to our senior management to quickly address customer concerns. Local customer account teams further support the global teams and are linked by a comprehensive communications and information management infrastructure.

Business Segment Data and our Foreign Operations

We have one reportable segment - Integrated Manufacturing Solutions (IMS). Financial information for segments can be found in note 16 to our consolidated financial statements. Information concerning revenues, results of operations and revenues by geographic area is set forth in Item 7, “Management's Discussion and Analysis of Financial Condition and Results of Operations” and in Note 16, “Business Segment, Geographic and Customer Information”, to our consolidated financial statements. Risks attendant to our foreign operations can be found in Item 1A. “Risk Factors”.

Competition
 
For our integrated manufacturing solutions business, we face competition from other major global EMS companies such as Benchmark Electronics, Inc., Celestica, Inc., Flextronics International Ltd., Jabil Circuits, Inc. and Plexus Corp. Our components, products and services business faces competition from EMS and non-EMS companies that often have a regional product, service or industry-specific focus. In addition, our potential customers may also compare the benefits of outsourcing their manufacturing to us with the merits of manufacturing products themselves.
 
We compete with different companies depending on the type of solution or geographic area. We believe the primary competitive factors in our industry include manufacturing technology, quality, global footprint, delivery, responsiveness, provision of value-added solutions and price. We believe our primary competitive strengths include our ability to provide global end-to-end solutions, product design and engineering resources, vertically integrated manufacturing solutions, advanced technologies, global manufacturing capabilities, global supplier base, customer focus and responsiveness, and expertise in serving diverse end markets.

Intellectual Property
 
We hold various U.S. and foreign patents and patent applications primarily related to printed circuit board technologies, methods of manufacturing printed circuit boards, enclosures, memory modules and computing (servers and storage). For other proprietary processes, we rely primarily on trade secret protection. We also have registered trademarks and pending applications in the U.S. and certain countries worldwide. A number of our patents covering certain technologies have

13

Table of Contents

expired or will expire in the near future. The expiration and abandonment of patents reduces our ability to assert claims against competitors or others who use similar technologies and to license such patents to third parties.

Environmental Matters
 
We are subject to a variety of local, state, federal and foreign environmental laws and regulations relating to the storage and use of hazardous materials used in our manufacturing processes, as well as the storage, treatment, discharge, emission and disposal of hazardous waste that are by-products of these processes. We are also subject to occupational safety and health laws, product labeling and product content requirements, either directly or as required by our customers. Proper waste disposal is a major consideration for printed circuit board manufacturers due to the metals and chemicals used in the manufacturing process. Water used in the printed circuit board manufacturing process must be treated to remove metal particles and other contaminants before it can be discharged into municipal sanitary sewer systems. We operate on-site wastewater treatment systems at our printed circuit board manufacturing plants in order to treat wastewater generated in the fabrication process.
 
Although the electronics assembly process generates significantly less wastewater than printed circuit board fabrication, it can also generate lead dust. As a result, it is important to maintain environmental controls. Upon vacating a facility, we are responsible for remediating the lead dust from the interior of the manufacturing facility. Although there are no applicable standards for lead dust remediation in manufacturing facilities, we endeavor to remove the residues. To date, lead dust remediation costs have not been material to our results of operations. We also monitor for airborne concentrations of lead in our buildings and are unaware of any significant lead concentrations in excess of the applicable OSHA or other local standards.

We have a range of corporate programs that aim to reduce the use of hazardous materials in manufacturing. We developed corporate-wide standardized environmental management systems, auditing programs and policies to enable better management of environmental compliance activities. For example, our facilities are also certified under ISO 14001, a set of standards and procedures relating to environmental compliance management. In addition, the electronics industry must adhere to the European Union's Restrictions of Hazardous Substances (RoHS) and Waste Electrical and Electronic Equipment (WEEE) directives which are in effect since July 2006. Parallel initiatives have been adopted in other jurisdictions, including several states in the U.S. and the Peoples' Republic of China. RoHS limits the use of lead, mercury and other specified substances in electronics products. WEEE requires producers to assume responsibility for the collection, recycling and management of waste electronic products and components. We implemented procedures intended to ensure our manufacturing processes are compliant with RoHS and the European Union's Registration, Evaluation and Authorization of Chemicals (REACH) legislation, when required. WEEE compliance is primarily the responsibility of OEMs.

Asbestos containing materials, or ACM, are present at several of our manufacturing facilities. Although the ACM is being managed and controls have been put in place pursuant to ACM operations and maintenance plans, the presence of ACM could give rise to remediation obligations and other liabilities.
 
Our facilities generally operate under environmental permits issued by governmental authorities. For the most part, these permits must be renewed periodically and are subject to revocation in the event of violations of environmental laws. Any such revocation may require us to cease or limit production at one or more of our facilities, adversely affecting our results of operations.

Due to certain acquisitions, we have incurred liabilities associated with environmental contamination. These include ongoing investigation and remediation activities at a number of current and former sites, including Irvine, California; Owego, New York; Derry, New Hampshire; and Brockville, Ontario. In addition, we have been named in a lawsuit alleging operations at our current and former facilities in Orange County, California contributed to groundwater contamination. There are some sites, including our acquired facility in Gunzenhausen, Germany, that are known to have groundwater contamination caused by a third-party, and that third-party has provided indemnification to us for the liability. However, third-party indemnities may not be effective to reduce our liability for environmental contamination. For example, Nortel Networks which had provided us indemnification with respect to environmental investigation activities undertaken at our former Brockville site is party to bankruptcy proceedings that may cause it to not fully honor its indemnification obligations to us. As a result, we could be required to absorb the full expense of any remediation of the Brockville facility.

We have also been named as a potentially responsible party at a contaminated disposal site operated by another party at the Casmalia Resources disposal site in Southern California as a result of the past disposal of hazardous waste by companies we have acquired or by our corporate predecessors. In addition, we have been named as a potentially responsible party by the California Department of Toxic Substance Control at a waste treatment site operated by another party in San Jose, California,

14

Table of Contents

allegedly as a result of waste we sent to be treated at that facility being discharged into the environment. Although liabilities for such historic disposal activities have not materially affected our financial condition to date, we cannot assure past disposal activities will not result in liability that will affect us in the future. In addition, we may be unaware of further environmental compliance issues, which could adversely affect our future operations.

We use environmental consultants primarily for risk assessments and remediation, including remedial investigation and feasibility studies, remedial action planning and design and site remediation. Our consultants provide information regarding the nature and extent of site contamination, acceptable remediation alternatives and estimated costs associated with each remediation alternative. We consider their recommendations together with other information when determining the appropriate amount to accrue for environmental liabilities.
 
Employees
 
As of September 28, 2013, we had 40,909 employees, including 7,765 temporary employees. None of our U.S. employees are represented by a labor union. In some international locations, our employees are represented by labor unions on either a national or plant level or are subject to collective bargaining agreements. Some foreign countries also have mandatory legal provisions regarding terms of employment, severance compensation and other conditions of employment that are more restrictive than U.S. laws.
 
Available Information
 
Our Internet address is http://www.sanmina.com. We make available through our website, free of charge, our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission, or SEC. All reports we file with the SEC are also available free of charge via EDGAR through the SEC's website at http://www.sec.gov.

15

Table of Contents


EXECUTIVE OFFICERS OF THE REGISTRANT
 
The following table sets forth the name, position and age of our current executive officers and their ages as of September 28, 2013.
 
Name
Age
Position
Jure Sola
62
Chairman of the Board and Chief Executive Officer
Robert Eulau
51
Executive Vice President and Chief Financial Officer
Charles Kostalnick
48
Executive Vice President and Chief Business Officer
Dennis Young
62
Executive Vice President of Worldwide Sales and Marketing
Alan Reid
50
Executive Vice President of Global Human Resources
 
Jure Sola has served as our Chief Executive Officer since April 1991, as Chairman of our Board of Directors from April 1991 to December 2001 and from December 2002 to present, and as Co-Chairman of our Board of Directors from December 2001 to December 2002. In 1980, Mr. Sola co-founded Sanmina and initially held the position of Vice President of Sales. In October 1987, he became the Vice President and General Manager of Sanmina, responsible for manufacturing operations, sales and marketing. Mr. Sola served as our President from October 1989 to March 1996.
 
Robert Eulau has served as our Executive Vice President and Chief Financial Officer since September 2009. Prior to joining us, he was the Executive Vice President, Chief Operating Officer and Chief Financial Officer of privately-owned Alien Technology Corporation, a developer of radio frequency identification products, from March 2006 to June 2008.  Previously, he was Senior Vice President and Chief Financial Officer of publicly-traded Rambus Inc., a technology licensing company, from May 2001 to March 2006. Prior to Rambus, Mr. Eulau served over 15 years with Hewlett Packard Company in various leadership roles, including Vice President and Chief Financial Officer of HP's Business Customer Organization, and Vice President and Chief Financial Officer of HP's Computing Products business.
 
Charles Kostalnick has served as our Executive Vice President and Chief Business Officer since September 2013. Prior to joining us, he was the Senior Vice President of Avnet, Inc, a distributor of electronic components, computer products and embedded technology, from July 2010 to September 2013. Previously, he was President of North America Distribution and held other leadership roles at Bell Micoproducts, Inc. (acquired by Avnet, Inc. in July 2010), a distributor of storage products and systems, computer products and peripherals, from October 2005 to July 2010. Prior to Bell Microproducts, Mr. Kostalnick held various roles at Arrow Electronics, including Vice President of Sales, OEM Computing Solutions, Area Director and Regional Director, from March 2000 to October 2005.
 
Dennis Young has served as our Executive Vice President of Worldwide Sales and Marketing since March 2003. Prior to joining us, Mr. Young was Senior Vice President of Sales from May 2002 to March 2003 and Vice President of Sales, from March 1998 to May 2002, of Pioneer-Standard Electronics, a provider of industrial and consumer electronic products.

Alan Reid has served as our Executive Vice President of Global Human Resources since October 2012. Mr. Reid has held various roles at Sanmina, including Senior Vice President of Global Human Resources and Human Resources Director of EMEA, from July 2001 to October 2012. Prior to joining us, he was Group Human Resources Manager at Kymata Ltd., an optoelectronic technology startup from June 2000 to July 2001. Prior to Kymata, Mr. Reid held various roles in operations and human resources with The BOC Group PLC., (British Oxygen Company), a global industrial gases and engineering company, from September 1986 to June 2000.


 


16

Table of Contents

Item 1A. Risk Factors

Adverse market conditions in the electronics industry could reduce our future sales and earnings per share.

 We cannot accurately predict future levels of demand for our customers' electronics products. Consequently, our past operating results, earnings and cash flows may not be indicative of our future operating results, earnings and cash flows. Adverse worldwide economic conditions, particularly in Europe, have in the recent past led to challenging conditions in the electronics industry. A number of factors, including price instability, the availability and cost of credit, high global unemployment and concerns about the stability and solvency of financial institutions, financial markets, businesses, and sovereign nations have slowed global economic growth in many countries. These conditions have resulted in some of our customers delaying purchases or placing purchase orders for lower volumes of products than previously experienced or anticipated. If such conditions persist or return, they could also cause a reduction in orders from our customers or potential customers due to a reduced availability of credit and the insolvency of one or more customers or suppliers. Any of these factors could reduce our revenues, increase our costs and decrease our liquidity.
 
Our customers could experience credit problems, which would reduce our future revenues and net income.

Many of the industries for which we provide products have previously experienced significant financial difficulty, with some of the participants filing for bankruptcy. Such financial difficulty, if experienced by one or more of our customers, may negatively affect our business due to the decreased demand from these financially distressed customers, the lengthening of customer payment terms, the potential inability of these companies to make full payment on amounts owed to us or to purchase inventory we acquired to support their businesses. For example, during 2013, we recorded charges of $6.6 million relating to a distressed customer. Customer bankruptcies also entail the risk of potential recovery by the bankruptcy estate of amounts previously paid to us that are deemed a preference under bankruptcy laws. We do not carry insurance against the risk of customer default on their payment obligations to us.

We seek to mitigate the impact of collection problems with our customers on our financial results by evaluating their creditworthiness on an ongoing basis and by maintaining an allowance for doubtful accounts that is assessed for adequacy quarterly. However, should customer defaults increase substantially or exceed the level of our allowance, our revenue, net income and cash position would be reduced, perhaps significantly. 

We rely on a relatively small number of customers for a substantial portion of our sales, and declines in sales to these customers would reduce our net sales and net income.
 
Sales to our ten largest customers represented approximately half of our net sales during 2013. We expect to continue to depend upon a relatively small number of customers for a significant percentage of our sales, particularly in the communications end market. A significant reduction in sales to any of our large customers or significant pricing and margin pressures exerted by our large customers would adversely affect our operating results. In the past, some of our large customers have significantly reduced or delayed the volume of manufacturing services ordered from us as a result of changes in demand for their product, consolidations or divestitures or for other reasons. In particular, certain of our customers have from time to time entered into manufacturing divestiture transactions with other EMS companies, and such transactions could reduce our revenues with these customers. We cannot assure you that present or future large customers will not terminate their manufacturing arrangements with us or significantly change, reduce or delay the amount of manufacturing services ordered from us, any of which would reduce our net sales and net income.

We are subject to intense competition in the EMS industry which could cause us to lose sales and therefore hurt our financial performance.
 
The electronics manufacturing services (EMS) industry is highly competitive and the industry has experienced a surplus of manufacturing capacity. Our competitors include major global EMS providers such as Benchmark Electronics, Inc., Celestica, Inc., Flextronics International Ltd., Jabil Circuit, Inc. and Plexus Corp., as well as other EMS companies that have a regional, product, service or industry specific focus. Some of those companies have greater manufacturing and financial resources than we do. We also face competition from current and potential OEM customers who may elect to manufacture their own products internally rather than outsourcing to EMS providers.

We may not be able to offer prices as low as some of our competitors because those competitors may have lower operating costs as a result of their geographic location, greater economies of scale or the services they provide or because these competitors are willing to provide EMS services at prices we are unable or unwilling to offer. There can be no assurance that

17

Table of Contents

we will not lose new or existing business in the future in response to such competitive pricing or other inducements which may be offered by our competitors, which would decrease our sales and net income. 

Our cash generated from operations is variable, which can adversely affect our ability to plan and invest in the business.

Our ability to make capital expenditures, engage in strategic transactions, redeem debt and repurchase stock and the extent to which we need to utilize our borrowing facilities depends in large part on our ability to generate cash flow from operations. Cash flow from operations is highly variable. For example, in 2011, 2012 and 2013, cash flow from operations was $235 million, $215 million and $318 million, respectively. Our cash generated by or used in operations is impacted by a number of variables, including our growth and profitability, customer and supplier payment terms, timeliness of customer payments to us and the extent to which we need to increase inventories in response to customer forecasts. To the extent our cash flow from operations fluctuates significantly in the future, our ability to make investments in our business, redeem debt and repurchase stock could be adversely impacted.

Our strategy to pursue higher margin business depends in part on the success of our Components, Products and Services (CPS) business, which, if not successful, could cause our future gross margins and operating results to be lower.
 
A key part of our strategy is to grow our CPS business, which includes printed circuit boards, backplane and cable assemblies, mechanical systems, memory, defense and aerospace and computing products and design, engineering, logistics and repair services. A decrease in orders for these components, products and services can have a disproportionately adverse impact on our profitability since these components, products and services generally carry higher than average contribution margins. In addition, in order to grow this portion of our business profitability, we must continue to make substantial investments in the development of our product development capabilities, research and development activities, test and tooling equipment and skilled personnel, all of which reduce our operating results in the short term. The success of our CPS business also depends on our ability to increase sales of our proprietary products, convince our customers to agree to purchase our components for use in the manufacture of their products and expand the number of our customers who contract for our design, engineering, logistics and repair services. We may face challenges in achieving commercially viable yields and difficulties in manufacturing components in the quantities and to the specifications and quality standards demanded by our customers, as well as in qualifying our components for use in our customers' designs. Our proprietary products and design, engineering, logistics and repair services must compete with products and services offered by established vendors which focus solely on development of similar technologies or the provision of similar services. Any of these factors could cause our CPS revenue and margins to be less than expected, which would have an overall adverse and potentially disproportionate effect on our revenues and profitability.

We may experience component shortages or price increases, which could cause us to delay shipments to customers and reduce our sales and net income.
 
We are dependent on certain suppliers, including limited and sole source suppliers, to provide key components we incorporate into our products. We have experienced, and may experience in the future, delays in delivery and shortages of components, which in turn could cause delays in product shipments to customers, result in reduced revenue from and have an adverse effect on our relationship with affected customers, and our reputation generally as a reliable service provider. Component shortages can result in increased component prices which could decrease our gross profit. Component delays and shortages can also result from natural disasters occurring in the regions in which our suppliers operate, such as the March 2011 earthquake and tsunami in Japan and the widespread flooding in Thailand during late 2011. We may purchase components in advance of our requirements for such components as a result of a threatened or anticipated shortage. In this event, we may incur additional inventory carrying costs and have a heightened exposure to inventory obsolescence costs, which may not be recoverable from our customers. Such costs would reduce our margins and net income. Finally, if key components become scarce, we may be required to look to second tier vendors or to procure components through brokers. Such components may be of lesser quality than those otherwise available and could cause us to incur costs to qualify such components or to replace them if they prove to be defective.

Our future gross margins and operating results may be adversely impacted by reduced demand for, or execution problems with, our integrated manufacturing solutions business.
 
The substantial majority of our revenues are derived from our integrated manufacturing solutions (IMS) business. We experience continued pressure from OEMs to reduce prices for these solutions and our competition remains intense. These factors can result in reduced IMS revenue, which would reduce our gross margins. Gross margins in our IMS business can also be negatively impacted by our product mix, with lower margins resulting from the provision of less complex services, and by execution issues and operational inefficiencies at our plants. If we experience reduced demand or revenues from our IMS

18

Table of Contents

business for any reason, or experience execution problems or operational inefficiencies, our gross margins and operating results in future periods may be lower than expected. 

Adverse changes in the key end markets we target could harm our business by reducing our sales.

We provide products and services to companies that serve the communications networks, computing and storage, multimedia, industrial and semiconductor capital equipment, defense and aerospace, medical, clean technology and automotive industries. Adverse changes in any of these markets could reduce demand for our customers' products or make these customers more sensitive to the cost of our products and services, either of which could reduce our sales, gross margins and net income. A number of factors could affect any of these industries in general, or our customers in particular, and lead to reductions in net sales, thus harming our business.

These factors include:
 
intense competition among our customers and their competitors, leading to reductions in prices for their products and pricing pressures on us;
short product life cycles of our customers' products leading to continuing new requirements and specifications and product obsolescence, either of which could cause us to lose business;
failure of our customers' products to gain widespread commercial acceptance which could decrease the volume of orders customers place with us; and
recessionary periods in our customers' markets which decrease orders from affected customers.

We realize a substantial portion of our revenues from communications equipment customers. This market is highly competitive, particularly in the area of price. Should any of our larger customers in this market fail to effectively compete with their competitors, they could reduce their orders to us or experience liquidity difficulties, either of which would have the effect of reducing our revenue and net income, perhaps substantially. Revenue from our multimedia business, which is driven primarily by sales of set-top boxes, could decline as more content is delivered over the internet or through alternative methods and not through set-top boxes, particularly in the U.S. or Europe. In addition, in the case of our defense business, United States budget actions could cause a reduction or delay in orders placed by the government or defense contractors for products manufactured by SCI, our defense and aerospace division. Since such products carry higher margins than many of our other products and services, such a decrease would disproportionately reduce our gross margin and profitability. There can be no assurance that we will not experience declines in demand in these or other areas in the future.

Our operating results are subject to significant uncertainties, which make predictability of our future sales and net income difficult.
 
Our operating results are subject to significant uncertainties, including:
 
conditions in the economy as a whole and in the electronics industry;
fluctuations in components prices and component shortages caused by high demand, natural disaster or otherwise;
timing of new product development by our customers, which creates demand for our services, but which can also require us to incur start-up costs relating to new tooling and processes;
levels of demand in the end markets served by our customers;
our ability to replace declining sales from end-of-life programs with new business wins;
timing of orders from customers and the accuracy of their forecasts;
inventory levels of customers, which if high relative to their normal sales volume, could cause them to reduce their orders to us;
timing of expenditures in anticipation of increased sales, customer product delivery requirements and shortages of components or labor;
increased labor costs in the regions in which we operate;
mix of products ordered by and shipped to major customers, as high volume and low complexity manufacturing services typically have lower gross margins than more complex and lower volume services;
degree to which we are able to utilize our available manufacturing capacity;

19

Table of Contents

our ability to maintain desired plant operating efficiencies, including achieving acceptable yields, effectively planning production and managing our inventory and fixed assets to avoid high carrying costs and excess working capital;
customer insolvencies resulting in bad debt or inventory exposures that are in excess of our reserves;
our ability to efficiently move manufacturing activities to lower cost regions without adversely affecting customer relationships while controlling costs related to the closure of facilities and employee severance;
pricing and other competitive pressures;
fluctuations in the values of our assets, including real property and assets held for sale, which could result in charges to income;
volatility of foreign currency exchange rates;
changes in our tax provision due to changes in our estimates of pre-tax income in the jurisdictions in which we operate, including our ability to utilize our deferred tax assets; and
political and economic developments in countries in which we have operations which could restrict our operations or increase our costs.
 
If any of these uncertainties should be realized, our financial results could be adversely impacted.

A portion of our operating expenses is relatively fixed in nature and planned expenditures are based in part on anticipated orders, which are difficult to predict. If we do not receive anticipated orders as expected, our profitability will decline. Moreover, our ability to reduce our costs as a result of current or future restructuring efforts may be limited because consolidation of operations can be a costly and lengthy process to complete.

Consolidation in the electronics industry may adversely affect our business by increasing customer buying power and increasing prices we pay for components.
 
Consolidation in the electronics industry among our customers, our suppliers and/or our competitors may increase as companies combine to achieve further economies of scale and other synergies. Consolidation in the electronics industry could result in an increasing number of very large electronics companies offering products in multiple sectors of the electronics industry. The significant purchasing and market power of these large companies could decrease the prices paid to us by these customers. In addition, if one of our customers is acquired by another company that does not rely on us to provide EMS services either because it has its own production facilities or relies on another provider of similar services, we may lose that customer's business. Similarly, consolidation among our suppliers could result in a sole or limited source for certain components used in our customers' products. Any such consolidation could cause us to be required to pay increased prices for such components, which would reduce our gross margin and profitability.

Unanticipated changes in our tax rates or exposure to additional income tax liabilities could increase our taxes and decrease our net income.

We are subject to income, sales, value-added, withholding and other taxes in the United States and various foreign jurisdictions. Significant judgment is required in determining our worldwide provision for taxes and, in the ordinary course of business, there are many transactions and calculations for which the ultimate tax determination is uncertain. Our effective tax rates and liability for other taxes could increase as a result of changes in the mix of earnings in countries with differing statutory tax rates, changes in the valuation of deferred tax assets and liabilities, changes in tax laws, our cash management strategies and other factors. For instance, pending Mexican legislation could significantly increase our taxes payable in Mexico in the future. In addition, our tax determinations are regularly subject to audit by tax authorities. For example, we are currently undergoing audits of our tax returns for certain recent tax years in a number of jurisdictions, including the United States, Thailand, Hungary, Japan and Mexico. Developments in these or future audits could adversely affect our tax provisions, including through the disallowance or reduction of deferred tax assets or the assessment of back taxes, interest and penalties. Although we believe that our tax estimates are reasonable and our existing tax reserves are adequate, the final determination of tax audits or tax disputes may be different from what is reflected in our historical tax provisions, which could lead to an increase in our taxes payable and a decrease in our net income.

Our business may experience seasonality, which could result in material changes in our operating results from quarter to quarter.

Seasonality in our business has historically been driven by customer and product mix, particularly the end markets which our customers serve. We have observed that our revenue levels have typically been higher in the second half of

20

Table of Contents

our fiscal year and lower during the first half. However, there can be no assurance that this trend will continue and the extent to which our business remains depends upon our future customer base and the end markets that they serve, which we are unable to predict.

We may be unable to generate sufficient liquidity to reduce our debt levels or maintain or expand our operations, which may reduce the business our customers and vendors are able to do with us; we could experience losses if one or more financial institutions holding our funds were to fail.

Our liquidity is dependent on profitability and business volume which affects working capital, including inventory requirements, the extension of trade credit by our suppliers, the degree of alignment of payment terms from our suppliers with payment terms granted to our customers, investments in facilities and equipment, acquisitions, repayments and redemptions of our outstanding indebtedness and repurchases of our common stock. In order to improve our liquidity, during the second quarter of 2012, we renewed and increased our asset-backed revolving credit facility increasing the facility to $300 million, under which we could borrow $266.4 million, net of letters of credit and outstanding borrowings, as of September 28, 2013 and in the fourth quarter of 2012, we borrowed $40 million secured by our corporate headquarters. We also have $184 million in short-term financing facilities all of which remained available to be borrowed as of September 28, 2013. Our asset-backed revolving credit facility expires in March 2017 and our foreign short-term facilities expire at various dates through the second quarter of 2015.

In the event we need additional capital, whether for working capital, debt repayment, stock repurchases, acquisitions or otherwise, there can be no assurance that such additional debt or equity capital will be available on acceptable terms or at all. In addition to our existing covenant requirements, future debt financing may require us to comply with financial ratios and covenants. New financing could require us to issue additional equity securities, which could cause dilution to existing stockholders. If additional or continued financing, including the continued extension of trade credit by our suppliers, is not available when required, our liquidity would be reduced. The risks of reduced liquidity include an inability to maintain or increase our rates of production, to make necessary capital expenditures in order to maintain and expand our manufacturing capacity as needed, and to repay, reduce or refinance our debt. Any of these issues could cause our stock price to fall and reduce our customers' and vendors' willingness to do business with us.

A principal source of our liquidity is our cash and cash equivalents, which are held with various financial institutions. Although we distribute such funds among a number of financial institutions that we believe to be of high quality, there can be no assurance that one or more of such institutions will not become insolvent in the future, in which case all or a portion of our uninsured funds on deposit with such institutions could be lost.

Our credit arrangements contain covenants which may adversely impact our business and the failure to comply with such covenants could cause our outstanding debt to become immediately payable.
 
Other than our $40 million loan secured by our corporate headquarters (the “Secured Debt due 2015”), our debt agreements do not contain financial covenants currently applicable to us, but do include a number of restrictive covenants, including restrictions on incurring additional debt, making investments and other restricted payments, selling assets, paying dividends and redeeming or repurchasing capital stock and debt, subject to certain exceptions. Our Secured Debt due 2015 requires us to maintain a minimum fixed charge coverage ratio during its term. Collectively, these covenants could constrain our ability to grow our business through acquisition or engage in other transactions, including refinancing our existing debt. In addition, such agreements include covenants requiring, among other things, that we file quarterly and annual financial statements with the SEC, comply with all laws, pay all taxes and maintain casualty insurance. If we are not able to comply with all of these covenants, for any reason, some or all of our outstanding debt as well as all amounts payable under our interest rate swaps on such debt, if any, could become immediately due and payable and the incurrence of additional debt under our asset-backed credit facility would not be allowed, any of which would have a material adverse effect on our liquidity and ability to conduct our business.
 
Redemptions of debt and repurchases of common stock reduce our working capital and liquidity; debt refinancing can entail higher interest expense, which would lower our net income; interest payments on variable rate debt can increase, which would lower our net income.

During 2012 and 2013, we redeemed net $360 million and net $257.4 million of our long-term debt, respectively, and announced a $100 million stock repurchase program. Although redemptions of debt and repurchases of stock improve our financial results, these actions also reduce our liquidity. If we should redeem or repurchase additional debt or stock, our working capital and liquidity would be further reduced. In addition, should we undertake to refinance any of our outstanding long-term debt, there can be no assurance that the terms of such refinancing, particularly the interest rate, would be favorable to

21

Table of Contents

us. Should we be forced to replace lower interest rate debt with higher interest rate debt, our interest expense would increase and our net income would be reduced. An aggregate of $540 million of our long-term debt and all of our short-term borrowings bear interest at a variable rate based upon LIBOR, either under the terms of such debt or as a result of interest rate swaps. Interest rates, including LIBOR, can change due to a variety of factors, including governmental debt levels, ratings downgrade of U.S. or other sovereign debt, the pace of economic growth and central bank actions. Should LIBOR increase substantially in the future for any reason, interest payments on our variable interest rate debt would also increase. At the same time, the interest rate swap counterparty for our Senior Notes due 2019 has the unilateral right, beginning in May 2014, to terminate such swap and pay us a market termination fee, in which case we would pay a 7% interest rate on such notes, which could be higher than the variable interest rate we currently pay through the swap. Any increase in the interest rates paid by us on our debt would increase our interest expense and lower our net income.  

We generally do not obtain long-term commitments from our customers; cancellations, reductions in production quantities, delays in production by our customers and changes in customer requirements could reduce our sales and net income.

We generally do not obtain firm, long-term purchase commitments from our customers and our bookings may generally be canceled prior to the scheduled shipment date. Customers may cancel their orders, reduce production quantities or delay production for a number of reasons, including significant decreases in demand for their products and services and decisions to engage with other EMS providers. Although the customer is generally liable for finished goods and work-in-process at the time of cancellation, we may be unable or, for other business reasons, choose not to enforce our contractual rights. Cancellations, reductions or delays of orders by customers would:

reduce our sales and net income by decreasing the volumes of products that we manufacture for our customers;
delay or eliminate recovery of our expenditures for inventory purchased in preparation for customer orders; and
lower our asset utilization, which would result in lower gross margins and lower net income.

In addition, customers sometimes require that we transfer the manufacturing of their products from one facility to another to achieve cost reductions and other objectives. These transfers have resulted in increased costs to us due to facility downtime, less than optimal utilization of our manufacturing capacity and delays and complications related to the transition of manufacturing programs to new locations. These transfers also have required us to close or reduce operations at certain facilities, particularly those in high cost locations such as the United States, Canada and Western Europe, and as a result we have incurred, and may incur in the future, significant costs for the closure of facilities, employee severance and related matters. We may be required to relocate additional manufacturing operations in the future and, accordingly, we may incur additional costs that decrease our net income.

 As a result of our components ordering policies and customer-requested ship dates, we may incur, and not be able to fully recover from our customers, the purchase price or carrying costs of components, work-in-process and finished goods, which would decrease our margins and net income.
 
In order to satisfy customer orders, we are frequently required to order components and other parts in advance of customer payment, particularly for long lead-time items. Furthermore, we may be required to keep additional components, work-in-process and finished goods in inventory in order to meet customer delivery dates. While our supply agreements with our customers generally allocate most of the liability for payment for such items to the customers, we may nonetheless incur additional carrying costs or not ultimately be compensated for these items should the customer default upon its obligations. To the extent we incur any such costs, our gross margins and net income would be reduced. 

If we manufacture or design defective products, or if our manufacturing processes do not comply with applicable statutory and regulatory requirements, we could be subject to claims, damages and fines and lose customers.

We manufacture products to our customers' specifications, and in some cases our manufacturing processes and facilities need to comply with various statutory and regulatory requirements. For example, many of the medical products that we manufacture, as well as the facilities and manufacturing processes that we use to produce them must comply with standards established by the United States Food and Drug Administration. In addition, our customers' products and the manufacturing processes that we use to produce them often are highly complex. As a result, products that we design or manufacture may at times contain design or manufacturing defects, and our manufacturing processes may be subject to errors or may not be in compliance with applicable statutory and regulatory requirements. Defects in the products we design or manufacture may result in product recalls, warranty claims by customers, including liability for repair costs, delayed shipments to customers or reduced or canceled customer orders. For example, a customer has asserted that we are liable for certain costs relating to the loss of use of products manufactured by us. Although we believe this claim is unsubstantiated, the total costs sought by the customer could

22

Table of Contents

be significant. If these types of defects or deficiencies are significant, our results of operations and business reputation could be harmed. The failure of the products that we design or manufacture or of our manufacturing processes and facilities to comply with applicable statutory and regulatory requirements may subject us to legal fines or penalties and, in some cases, require us to shut down or incur considerable expense to correct a manufacturing program or facility. In addition, these defects may result in product liability claims against us. The magnitude of such claims may increase as we expand our medical, automotive, and aerospace and defense manufacturing services because defects could result in death or significant injury to end users of these products. Even if our customers are contractually responsible for defects in the design of a product, we could nonetheless be named in a product liability suit over such defects and could be required to expend significant resources to defend ourselves.
 
We design products on a contract basis or jointly with our customers. The design services that we provide can expose us to different or greater potential liabilities than those we face when providing our regular manufacturing services. For example, we have increased exposure to potential product liability claims resulting from injuries caused by defects in products we design, as well as potential claims that products we design infringe third-party intellectual property rights. Such claims could subject us to significant liability for damages and, regardless of their merits, could be time-consuming and expensive to resolve. Any such costs and damages could be significant and would reduce our net income.

Failure to comply with domestic or international employment and related laws could result in the payment of significant damages, which would reduce our net income.
 
We are subject to a variety of domestic and foreign employment laws, including those related to safety, wages and overtime, discrimination, whistle-blowing, classification of employees and severance payments. Enforcement activity relating to these laws, particularly outside of the United States, can increase as a result of increased media attention due to violations by other companies, changes in law, political and other factors. There can be no assurance that we won't be found to have violated such laws in the future, due to a more aggressive enforcement posture by governmental authorities or for any other reason. Any such violations could lead to the assessment of fines against us by federal, state or foreign regulatory authorities or damages payable to employees, which fines could be substantial and which would reduce our net income.

Energy price increases may negatively impact our results of operations; regulatory actions could affect the price of energy, which could increase our costs and reduce our profitability; natural resource shortages could impact our production.

We, along with our suppliers and customers, rely on various energy sources in our manufacturing and transportation activities. There has been significant volatility in the prices of energy during the recent past and such volatility is likely to continue in the future. A sustained increase in energy prices could cause an increase to our raw material, components and transportation costs. We may not be able to increase our product prices enough to offset these increased costs, in which case our profitability would be reduced.

Concern over climate change has led to state, federal and international legislative and regulatory initiatives aimed at reducing carbon dioxide and other greenhouse gas emissions. While we don't expect existing or currently proposed initiatives to directly impact our business operations in the near future, these measures could over the long term lead to an increase in the cost of energy used in the manufacture of our products as a result of restrictions placed upon power generators and distributors. We can't currently estimate the impact of any such indirect costs. However, should our operating costs in fact rise as a result of any current, proposed or future greenhouse gas initiatives, and we are not able to pass such costs to our customers, our operating results would be adversely affected.
Certain natural resources, including water used in our production processes, may become constrained, particularly in China, where economic output may outstrip natural resources. Such shortages could raise our costs or otherwise impact our production.

We are subject to risks arising from our international operations.
 
We conduct our international operations primarily in Asia, Latin America, Canada and Europe, and we continue to consider additional opportunities to make foreign acquisitions and establish new foreign facilities. The substantial majority of our net sales are generated through our non-U.S. operations and a significant portion of our manufacturing material is provided by international suppliers. As a result of our international operations, we are affected by economic, political and other conditions in foreign countries, including:
  
the imposition of government controls;
compliance with United States and foreign laws concerning trade and employment practices;

23

Table of Contents

difficulties in obtaining or complying with export license requirements;        
trade restrictions;
changes in tariffs;
labor unrest, including strikes, and difficulties in staffing;
security concerns;
regional military tension or hostilities;
inflexible employee contracts in the event of business downturns;
coordinating communications among and managing international operations;
fluctuations in currency exchange rates;
currency controls;
increases in duty and/or income tax rates;
adverse rulings in regards to tax audits;
excess costs associated with reducing employment or shutting down facilities;
misappropriation of intellectual property; and
constraints on our ability to maintain or increase prices. 

Our operations in certain foreign locations receive favorable income tax treatment in the form of tax holidays or other incentives. In the event that such tax holidays or other incentives are not extended, are repealed, or we no longer qualify for such programs, our taxes may increase, which would reduce our net income.
 
Additionally, a significant portion of our worldwide cash reserves are generated by, and therefore held in, foreign jurisdictions. Some jurisdictions restrict the amount of cash that can be transferred to the United States or impose taxes and penalties on such transfers of cash. To the extent we have excess cash in foreign locations that could be used in, or is needed by, our United States operations, we may incur significant taxes to repatriate these funds.
 
We operate in countries that have experienced labor unrest, political instability and strife, including Brazil, China, India, Israel, Malaysia and Thailand and we have experienced work stoppages and similar disruptions in certain foreign jurisdictions. To the extent such developments prevent us from adequately staffing our plants and manufacturing and shipping products in those jurisdictions, our margins and net income could be reduced and our reputation as a reliable supplier could be negatively impacted.

We have incurred substantial restructuring charges in the past and we may need to take material restructuring charges in the future.
 
We have incurred significant expenses related to restructuring of our operations in the past and may continue to do so in the future. For example, we have moved, and may continue to move, our operations from higher-cost to lower-cost locations to meet customer requirements. We have incurred in the past, and may incur in the future, costs related to workforce reductions, facility closures and subsequent environmental remediation, work stoppages and labor unrest resulting from the closure of facilities. In addition, we have incurred unanticipated costs related to the transfer of operations to lower-cost locations, including costs related to integrating new facilities, managing operations in dispersed locations and realigning our business processes. We also have incurred costs to restructure operations that have been acquired in order to integrate them into our company. We expect to be required to record additional charges related to restructuring activities in the future, but cannot predict the timing or amount of such charges. Any such charges would reduce our net income.
 
Our results may be adversely affected by rising labor costs.
 
There is substantial uncertainty about future labor costs, in particular within the lower cost regions in which we operate. Demographic changes and economic development in these regions put upward pressure on wages in these regions. If we are required to make any substantial increase in wages in these regions, our profitability could be reduced.

Commodity price fluctuations may negatively impact our results of operations.

Our components are manufactured using a number of commodities, including petroleum, gold, copper and other metals that are subject to frequent and unpredictable changes in price due to worldwide demand, investor interest and economic conditions. We do not hedge against the risk of these fluctuations, but rather attempt to adjust our product pricing to reflect such

24

Table of Contents

changes. Should significant increases in commodities prices occur and should we not be able to increase our product prices enough to offset these increased costs, our gross margins and profitability would decrease, perhaps significantly.

Our business could be adversely affected by any delays, or increased costs, resulting from the use of common carriers to transport our materials and products.

We rely on a variety of common carriers to transport our raw materials and components from our suppliers to us, and to transport our products to our customers. The use of common carriers is subject to a number of risks, including increased costs due to rising energy prices and labor, vehicle and insurance costs, criminal activity, such as hijackings, resulting in losses of shipments, delivery delays resulting from labor disturbances and strikes and other factors beyond our control. While we attempt to mitigate our liability for any losses resulting from these risks through contracts with our customers, suppliers and insurance carriers, any costs or losses that cannot be mitigated could reduce our profitability, require us to manufacture replacement product or damage our relationships with our customers.
 
Our key personnel are critical to the continued growth of our business and we cannot assure you that they will remain with us.
 
Our success depends upon the continued service of our key personnel, particularly our highly skilled operations managers and engineers involved in the manufacture of existing products and development of new products and processes. Such employees may be heavily recruited by other companies, including our competitors. Generally, these employees are not bound by employment agreements and we rely on competitive pay packages in order to help attract and retain such personnel. Should our key employees choose to terminate their employment with us in order to accept higher pay packages or otherwise, our operations and growth prospects could be negatively impacted.

If we are unable to maintain our technological and manufacturing process expertise, our business could be adversely affected.

Improvements to and refinements of our manufacturing processes are necessary to manufacture next generation products for our customers in a cost-efficient manner. As a result, we are continually evaluating the cost-effectiveness and feasibility of new manufacturing processes. In some cases, we will be required to make capital expenditures and incur engineering expense in order to qualify and validate any such new process. Such expenses would reduce our net income. In addition, any delay in the deployment of such new process, or problems commencing volume production using a new process could also reduce our competitiveness, decrease our margins and net income and harm our reputation with our customers.
Our international sales are subject to laws relating to trade, export controls and foreign corrupt practices, the violation of which could adversely affect our operations.
 
We are required to comply with all applicable domestic and foreign export control laws, including the International Traffic in Arms Regulations and the Export Administration Regulations (“EAR”). Some items manufactured by us are controlled for export by the United States Department of Commerce's Bureau of Industry and Security under the EAR. In addition, we are subject to the Foreign Corrupt Practices Act and international counterparts relating to bribery of foreign governments and officials, such as the U.K. Bribery Act. Violation of any of these laws or regulations could result in significant sanctions, including large monetary penalties and suspension or debarment from participation in future business opportunities, which could reduce our future revenue and net income and damage our reputation as a reputable supplier. In addition, defense of any such claim would likely be time consuming and expensive to resolve and would divert management's time and attention.
 
We are subject to a number of U.S. governmental procurement rules and regulations, the failure to comply with which could result in damages or reduction of future revenue.
 
We are subject to a number of laws and regulations relating to the award, administration and performance of U.S. government contracts and subcontracts. Such laws and regulations govern, among other things, price negotiations, cost accounting standards and other aspects of performance under government contracts. These rules are complex and our performance under them is subject to audit by the Defense Contract Audit Agency and other government regulators. If an audit or investigation reveals a failure to comply with regulations or other improper activities, we may be subject to civil or criminal penalties and administrative sanctions by either the government or the prime customer, including termination of the contract, payment of fines and suspension or debarment from doing further business with the U.S. government. Any of these actions would increase our expenses, reduce our revenue and damage our reputation as a reliable government supplier.
 

25

Table of Contents

We can experience losses due to foreign exchange rate fluctuations, which would reduce our net income.
 
Because we manufacture and sell a substantial portion of our products abroad, our operating costs are subject to fluctuations in foreign currency exchange rates. If the U.S. dollar weakens against the foreign currencies in which we denominate certain of our trade accounts payable, fixed purchase obligations and other expenses, the U.S. dollar equivalent of such expenses would increase. We use financial instruments, primarily short-term foreign currency forward contracts, to hedge certain forecasted foreign currency commitments arising from trade accounts receivable, trade accounts payable and fixed purchase obligations. Our foreign currency hedging activities depend largely upon the accuracy of our forecasts of future sales, expenses, capital expenditures and monetary assets and liabilities. As such, our foreign currency forward contracts may exceed or not cover our full exposure to exchange rate fluctuations. If these hedging activities are not successful, we may experience significant unexpected expenses from fluctuations in exchange rates, which could be significant and which would decrease our net income.
  
Any failure to comply with applicable environmental laws could adversely affect our business by causing us to pay significant amounts for cleanup of hazardous materials or for damages or fines.
 
We are subject to various federal, state, local and foreign environmental laws and regulations, including those governing the use, storage, discharge and disposal of hazardous substances and wastes in the ordinary course of our manufacturing operations. If we violate environmental laws or if we occupy or occupied in the past a site at which a predecessor company caused contamination, we may be held liable for damages and the costs of remedial actions. We cannot assure you that we will not violate environmental laws and regulations in the future as a result of human error, equipment failure or other causes. Although we estimate and regularly reassess our potential liability with respect to violations or alleged violations and accrue for such liability, we cannot assure you that our accruals will be sufficient. Any increase in existing reserves or establishment of new reserves for environmental liability would reduce our net income. Our failure or inability to comply with applicable environmental laws and regulations could also limit our ability to expand facilities or could require us to acquire costly equipment or to incur other significant expenses to comply with these laws and regulations.
 
Asbestos containing materials, or ACM, are present at several of our manufacturing facilities. Although the ACM is being managed and controls have been put in place pursuant to ACM operations and maintenance plans, the presence of ACM could give rise to remediation obligations and other liabilities.
 
Our plants generally operate under environmental permits issued by governmental authorities. For the most part, these permits must be renewed periodically and are subject to revocation in the event of violations of environmental laws. Any such revocation could require us to cease or limit production at one or more of our facilities, thereby having an adverse impact on our results of operations.

Primarily as a result of certain of our acquisitions, we have incurred liabilities associated with environmental contamination. These liabilities include ongoing investigation and remediation activities at a number of current and former sites, including ones located in Irvine, California; Owego, New York; Derry, New Hampshire; and Brockville, Ontario. There are some sites, including our acquired facility in Gunzenhausen, Germany, that are known to have groundwater contamination caused by a third-party, and that third-party has provided indemnity to us for the liability. However, third party indemnities may not be effective to reduce our liability for environmental contamination. For example, Nortel Networks, which had provided us an indemnity with respect to environmental investigation activities being undertaken at our former Brockville site, is party to bankruptcy proceedings that may cause it not to fully honor its indemnification obligations to us. As a result, we could be required to absorb the full expense of any remediation of that site.

The time required to perform environmental remediations can be lengthy and there can be no assurance that the scope, and therefore cost, of these activities will not increase as a result of the discovery of new contamination or contamination on adjoining landowner's properties or the adoption of more stringent regulatory standards covering sites at which we are currently performing remediation activities.  
 
Although liabilities for historical treatment and disposal activities have not materially affected our financial condition to date, we cannot assure you that past disposal activities will not result in liability that will materially affect us in the future, nor can we provide assurance that we do not have environmental exposures of which we are unaware and which could adversely affect our future operating results.
 
Over the years, environmental laws have become, and in the future may continue to become, more stringent, imposing greater compliance costs and increasing risks and penalties associated with violations. We operate in several environmentally sensitive locations and are subject to potentially conflicting and changing regulatory agendas of political, business and

26

Table of Contents

environmental groups. Changes in or restrictions on discharge limits, emissions levels, permitting requirements and material storage or handling could require a higher than anticipated level of remediation activities, operating expenses and capital investment or, depending on the severity of the impact of the foregoing factors, costly plant relocation.
 
In addition, the electronics industry became subject to the European Union's RoHS (Restriction of Hazardous Substances) and WEEE (Waste from Electrical and Electronic Equipment) directives which took effect beginning in 2005. Parallel initiatives have been adopted in other jurisdictions, including several states in the United States and the People's Republic of China. RoHS prohibits the use of lead, mercury and certain other specified substances in electronics products and WEEE requires OEMs to assume responsibility for the collection, recycling and management of waste electronic products and components. Although we believe we have implemented procedures to make our manufacturing process RoHS compliant, a successful assertion by a governmental entity of non-compliance could result in significant costs and/or penalties. In the case of WEEE, the compliance responsibility rests primarily with OEMs rather than with EMS companies. However, OEMs may turn to EMS companies for assistance in meeting their WEEE obligations, which could increase our costs.

Cybersecurity breaches and other disruptions of our IT network and systems could interrupt our operations.
 
We rely on information technology networks and systems, some of which are owned and operated by third parties, to process, transmit and store electronic information. In particular, we depend on our information technology infrastructure for a variety of functions, including worldwide financial reporting, inventory management, procurement, invoicing and email communications. Any of these systems may be susceptible to outages due to fire, floods, power loss, telecommunications failures, terrorist attacks and similar events. Despite the implementation of network security measures, our systems and those of third parties on which we rely may also be vulnerable to computer viruses, break-ins, malware and similar disruptions. Malware, if surreptitiously installed on our systems and not timely detected and removed, could collect and disclose sensitive information relating to our customers, employees or others, exposing us to legal liability and causing us to suffer reputational damage. If we or our vendors are unable to prevent such outages and breaches, our operations could be disrupted.

Employee theft or fraud could result in loss.

Certain of our employees have access to, or signature authority with respect to, bank accounts or other company assets, which exposes us to the risk of fraud or theft. In addition, certain employees have access to key IT infrastructure and to customer and other information that is commercially valuable. Should any employee, for any reason, compromise our IT systems, or misappropriate customer or other information, we could incur losses, including losses relating to claims by our customers against us, the willingness of customers to do business with us may be damaged and, in the case of our defense business, we could be debarred from future participation in government programs.

We may not be successful in implementing and integrating strategic transactions or in divesting assets or businesses, which could harm our operating results.
 
From time to time, we may undertake strategic transactions that give us the opportunity to access new customers and new end-customer markets, to obtain new manufacturing and service capabilities and technologies, to enter new geographic manufacturing locations, to lower our manufacturing costs and improve our profits, and to further develop existing customer relationships. Strategic transactions involve a number of risks, uncertainties and costs, including the following:
 
integrating acquired operations and businesses including in regions or countries in which we have not previously operated;
incurring severance and other restructuring costs, which would reduce our net income;
obtaining regulatory approvals or other conditions to closing, which could delay the closing and increase the costs of strategic transactions;
diverting management attention from day-to-day duties in order to implement and integrate strategic transactions;
scaling up production and coordinating management of operations at new sites;
incurring transaction expenses, which could be significant;
separating operations or support infrastructure for entities divested;
managing and integrating operations in geographically dispersed locations;
maintaining customer, supplier or other favorable business relationships of acquired operations and terminating unfavorable relationships, which could be costly;
integrating the acquired company's systems into our management information systems;

27

Table of Contents

satisfying unforeseen liabilities of acquired businesses, including liability for past violations of law and environmental liabilities, which could be material and which could subject us to ongoing regulatory scrutiny or requirements;
operating in geographic markets or industry sectors in which we may have little or no experience;
complying with laws of new jurisdictions in which we have not previously operated;
improving and expanding our management information systems to accommodate expanded operations; and
losing key employees of acquired operations.
 
Asset or business divestitures, even when part of our strategic plan, could reduce our revenue and net income.

Any of these factors could prevent us from realizing the anticipated benefits of a strategic transaction, and our failure to realize these benefits could reduce our sales below and increase our costs above our forecasts and could cause write-downs of the value of the business acquired which would decrease our net income. Acquisitions may also be dilutive to our earnings per share, particularly if our projections and assumptions about the acquired business' future operating results prove to be inaccurate. As a result, although the goal of our acquisition and divestiture strategy is to improve our operating results and increase stockholder value, there can be no assurance that any transactions that we complete will actually do so.
 
If we are unable to protect our intellectual property or infringe, or are alleged to infringe, upon intellectual property of others, we could be required to pay significant amounts in costs or damages.
 
We rely on a combination of copyright, patent, trademark and trade secret laws and restrictions on disclosure to protect our intellectual property rights. We cannot be certain that the steps we have taken will prevent unauthorized use of our intellectual property. For example, we rely in part upon patents to protect our intellectual property position. However, a number of our patents covering certain aspects of our manufacturing processes or products have expired or will expire in the near future. Such expirations reduce our ability to assert claims against competitors or others who use or sell similar technology. Any failure to protect our intellectual property rights would diminish or eliminate the competitive advantages that we derive from our proprietary technology. 
 
We are also subject to the risk that current or former employees violate the terms of their proprietary information agreements with us. Should a key current or former employee use or disclose any of our or our customers' proprietary information, we could become subject to legal action by our customers or others, our key technologies could become compromised and our ability to compete could be adversely impacted.

Finally, we may occasionally become involved in administrative proceedings, lawsuits or other proceedings if others allege that we infringe on their intellectual property rights. Some of these claims could subject us to significant liability for damages and invalidate our property rights. If successful, such claims could impair our ability to collect royalties or license fees or could force us or our customers to:
 
stop producing products that use the challenged intellectual property;
obtain from the owner of the infringed intellectual property, at our expense, a license to sell the relevant technology at an additional cost, which license may not be available on reasonable terms, or at all; or
redesign those products or services so as not to use the infringed technology.

We sometimes design products on a contract basis or jointly with our customers. In these situations, we may indemnify our customer against liability caused by claims that the design infringes the intellectual property rights of a third party. Such indemnification claims could require us to assume the defense of such a claim, the cost of which could be significant.
 
Any of these results could reduce our revenue, increase our costs and reduce our net income and could damage our reputation with our customers. In addition, any type of intellectual property lawsuit, whether initiated by us or a third party, would likely be time consuming and expensive to resolve and would divert management's time and attention.

We may not have sufficient insurance coverage for potential claims and losses, which could leave us responsible for certain costs and damages.
 
We carry various forms of business and liability insurance in types and amounts we believe are reasonable and customary for similarly situated companies in our industry. However, we do not have insurance coverage for all of the risks and

28

Table of Contents

liabilities we assume in connection with our business and the products and services we provide to our customers, including failure to comply with typical customer warranties for workmanship, product liability, intellectual property infringement and product recall claims. In addition, our policies generally have deductibles that would reduce the amount of our potential recoveries from insurance. As a result, not all of our potential business losses are covered under our insurance policies. Should we sustain a significant uncovered loss, our net income would be reduced.

Provisions of the Dodd-Frank Act relating to “Conflict Minerals” may increase our costs and lead to reputational challenges.

The Dodd-Frank Wall Street Reform and Consumer Protection Act contains provisions to improve transparency and accountability concerning the supply of certain minerals originating from the Democratic Republic of Congo (DRC) and adjoining countries that are believed to be benefiting armed groups. As a result, the SEC has adopted due diligence, disclosure and reporting requirements for companies which manufacture products that include components containing such minerals, regardless of whether the minerals are actually mined in the DRC or adjoining countries. Our first report under these rules will be due by May 31, 2014.

Such regulations could decrease the availability and increase the prices of components used in our customers' products, particularly if we choose (or are required by our customers) to source such components from different suppliers than we use now. In addition, as our supply chain is complex and the method of complying with these SEC rules is unclear, we expect that the compliance process will be both time-consuming and costly. We may face reputational challenges with our customers and other stakeholders if we are unable to timely verify the origins of minerals contained in the components included in our customers' products, or if our due diligence process reveals that materials we source originate in the DRC or adjoining countries and benefit armed groups. 

Changes in financial accounting standards or policies have affected, and in the future may affect, our reported financial condition or results of operations; additionally, changes in securities laws and regulations have increased, and are likely to continue to increase, our operating costs.
 
We prepare our consolidated financial statements in conformity with accounting principles generally accepted in the United States, or U.S. GAAP. Our preparation of financial statements in accordance with U.S. GAAP requires that we make estimates and assumptions that affect the recorded amounts of assets and liabilities, disclosure of those assets and liabilities as of the date of the financial statements and the recorded amounts of expenses during the reporting period. A change in the facts and circumstances surrounding those estimates could result in a change to our estimates and could impact our future operating results.
 
In addition, these principles are subject to interpretation by the Financial Accounting Standards Board (FASB), the SEC and various bodies formed to interpret and create accounting policies. A change in those policies can have a significant effect on our reported results and may affect our reporting of transactions which are completed before a change is announced. Accounting policies affecting many other aspects of our business, including rules relating to revenue recognition, off-balance sheet transactions, stock-based compensation, restructuring, acquisition accounting, asset disposals and asset retirement obligations, leases, intangible assets, derivative and other financial instruments and in-process research and development charges, have recently been revised or are under review. Changes to those rules or the questioning of how we interpret or implement those rules may have a material adverse effect on our reported financial results or on the way we conduct business. In addition, the anticipated convergence of U.S. GAAP and international financial accounting standards creates uncertainty as to the financial accounting policies and practices we will need to adopt in the future.

Finally, corporate governance, public disclosure and compliance practices continue to evolve based upon continuing legislative action, SEC rulemaking and stockholder advisory group policies. As a result, the number of rules and regulations applicable to us may increase, which would also increase our legal and financial compliance costs and the amount of time management must devote to compliance activities. Increasing regulatory burdens could also make it more difficult for us to attract and retain qualified members of our board of directors, particularly to serve on our audit committee, and qualified executive officers in light of an increase in actual or perceived workload and liability for serving in such positions.
 
The market price of our common stock is volatile.

The stock market in recent years has experienced significant price and volume fluctuations that have affected the market prices of companies, including companies in the EMS business. These fluctuations have often been unrelated to the operating performance of these companies. The market for our common stock has been and may in the future be subject to similar volatility. Factors such as fluctuations in our operating results, announcements by our competitors or other events

29

Table of Contents

affecting companies in the electronics industry, currency fluctuations, general market fluctuations and macro economic conditions may cause the market price of our common stock to decline.

We are subject to risks associated with natural disasters and global events.
 
We conduct a significant portion of our activities including manufacturing, administration and information technology management in areas that have experienced natural disasters, such as major earthquakes, hurricanes, floods and tsunamis. For example, in March 2011, Japan experienced a major earthquake and tsunami and in late 2011, widespread flooding occurred in Thailand. Our insurance coverage with respect to damages to our facilities or our customers' products caused by natural disasters is limited and is subject to deductibles and coverage limits and, as a result, may not be sufficient to cover all of our losses. For example, our policies do not cover damage due to earthquake. In addition, such coverage may not continue to be available at commercially reasonable rates and terms. In the event of a major earthquake or other disaster affecting one or more of our facilities, our operations and management information systems, which control our worldwide procurement, inventory management, shipping and billing activities, could be significantly disrupted. Such events could delay or prevent product manufacturing and shipment for the time required to transfer production or repair, rebuild or replace the affected manufacturing facilities. While we have disaster recovery plans in place, there can be no assurance that such plans will be sufficient to allow our operations to continue in the event of every natural or man-made disaster, pandemic or other extraordinary event. Any extended inability to continue our operations at unaffected facilities following such an event would reduce our revenue and potentially damage our reputation as a reliable supplier.

Item 1B.   Unresolved Staff Comments
 
None.


30

Table of Contents

Item 2.   Properties
 
Facilities. Our customers market numerous products throughout the world and therefore need to access manufacturing services on a global basis. To enhance our integrated manufacturing solutions offerings, we seek to locate our facilities either near our customers and our customers' end markets in major centers for the electronics industry or, when appropriate, in lower cost locations. Many of our plants located near customers and their end markets are focused primarily on new product introduction and final system assembly and test, while plants located in lower cost areas are engaged primarily in higher volume, less complex component and subsystem manufacturing and assembly.
 
We continue to evaluate our global manufacturing operations and restructure our facilities and operations to bring our manufacturing capacity in line with demand and our manufacturing strategy and to provide cost efficient services to our customers. Through this process, we have closed certain facilities not required to satisfy current demand levels. We provide extensive operations in lower cost locations including Latin America, Eastern Europe, China, India and Southeast Asia and we plan to expand our presence in these lower cost locations as appropriate to meet the needs of our customers.
 
As of September 28, 2013, the approximate square footage of our active manufacturing facilities by country was as follows:
 
 
Approximate
Square Footage
Argentina
1,335

Australia
7,105

Brazil
277,206

Canada
190,837

China
3,029,134

Columbia
2,772

Czech Republic
70,870

Finland
223,060

Germany
363,778

Hong Kong
29,682

Hungary
592,388

India
379,115

Indonesia
99,210

Ireland
110,000

Israel
136,292

Malaysia
264,054

Mexico
2,034,044

Singapore
472,935

South Africa
3,670

Sweden
77,425

Thailand
326,293

United Kingdom
41,174

United States
2,980,325

Total
11,712,704

 
As of September 28, 2013, our active manufacturing facilities consist of 8,409,805 square feet in facilities that we own, with the remaining 3,302,899 square feet in leased facilities under lease terms expiring between 2014 and 2042.

In addition to the above, we have 173,333 square feet of non-manufacturing space that we are currently using and 1,497,273 square feet of space in inactive facilities, of which 424,585 square feet is in domestic locations and 1,072,688 square feet is in international locations. Additionally, 205,412 square feet of space in our inactive facilities is leased to third parties. We are currently undertaking an aggressive program to sublease or terminate leases for unused facilities and to sell owned properties that are no longer expected to serve our future needs. These properties are being marketed for sale at an aggregate

31

Table of Contents

list price of over $80 million. We regularly evaluate our expected future facilities requirements. We believe our existing facilities are adequate to meet our requirements for the next 12 months. 

Certifications and Registrations. Certifications and registrations under industry standards are important to our business because many customers rely on them to confirm our adherence to manufacturing process and quality standards. Certain markets, such as telecommunications, medical, aviation, defense, aerospace and automotive, require adherence to industry-specific standards. Substantially all of our manufacturing facilities are registered under ISO 9001:2008, a standard published by the International Organization for Standardization. As part of the ISO 9001:2008 certification process, we have a highly developed quality management system and continually improve its effectiveness in accordance with its requirements. We use this registration to demonstrate our ability to consistently provide product that meets customer and applicable regulatory requirements and enhance customer satisfaction through its effective application. ISO 9001:2008 registration is of particular importance to our customers throughout the world.
 
In addition to ISO 9001:2008, most of our facilities are TL 9000 registered. The TL 9000 quality system requirements and quality system metrics are designed specifically for the telecommunications industry to promote consistency and efficiency, reduce redundancy and improve customer satisfaction. Included in the TL 9000 system are performance-based metrics that quantify reliability and quality performance of the product. The majority of our facilities are also compliant with the standards set by Underwriters Laboratories (UL). These standards define requirements for quality, manufacturing process control and manufacturing documentation and are required by many OEMs in the communications sector of the electronics industry.
 
Our medical systems division has identified certain manufacturing facilities to be centers of excellence for medical products manufacturing. These facilities are FDA and ISO 13485:2003 certified and, where appropriate, FDA registered. All facilities are fully compliant with the FDA's quality systems regulations.
 
Our defense and aerospace operations are headquartered in Huntsville, Alabama and are housed in a facility dedicated to meeting the specialized needs of our defense and aerospace customers. This defense and aerospace operation is AS9100 registered and is also certified under various U.S. military specifications as well as under ANSI and other standards appropriate for defense and aerospace suppliers. Other selected operations around the world are also AS9100 registered.
 
Our automotive facilities are strategically located worldwide. Substantially all of our automotive facilities are certified to ISO/TS 16949:2009, the automotive industry standard.

Item 3.   Legal Proceedings
 
Two of our subsidiaries, Sanmina-SCI do Brasil Technology Ltda. and Sanmina do Brasil Integration Ltda., are parties to six separate administrative and judicial proceedings in the Brazilian Chamber of Appeals of Administrative Court, the Chamber of the Administrative Court of São Paulo, Brazil and the Lower Federal Court in Campinas, São Paulo State. The cases were brought against the subsidiaries at various times between November 2006 and May 2013 by the Federal Revenue Secretariat of Brazil and State Treasury of São Paulo. The claims allege that these subsidiaries failed to comply with certain bookkeeping and tax rules for certain periods between 2001 and 2010. The claims seek payment by the subsidiaries of state value-added tax and income and excise taxes allegedly owed by the subsidiaries, as well as fines. In addition, in February 2008, the subsidiaries filed a claim against the Chief Office of Brazilian Internal Revenue Service seeking recovery of certain income taxes and social fund contributions which it believes it overpaid in 1999 and 2000. The administrative agencies and the court reached decisions in these cases against the subsidiaries between March 2007 and October 2012, all of which were appealed between April 2007 and November 2012. The administrative agencies and court have not ruled on any of the subsidiaries’ latest appeals. In addition, the subsidiaries’ claim against the Brazilian Internal Revenue Service has been denied and is on appeal. The subsidiaries believe they have meritorious positions in these matters and intend to continue to contest the claims against them, although there can be no assurance that these claims will not have a material adverse effect on our results of operations in the future.

On June 23, 2008, the Orange County Water District filed suit against Sanmina Corporation and 17 other defendants in California Superior Court for Orange County alleging that the defendants' actions had polluted groundwater managed by the plaintiff. The complaint sought recovery of compensatory and other damages, as well as declaratory relief, for the payment of costs necessary to investigate, monitor, remediate, abate and contain contamination of groundwater within the plaintiff's control. We have disputed the plaintiff's claims and asserted various defenses. On April 9, 2013, the Superior Court ruled in favor of our motion for summary adjudication dismissing us from the suit. In late August, 2013, the plaintiff appealed the Superior Court’s judgment. We anticipate that the Court of Appeal will hear the appeal by the middle of calendar 2014.


32

Table of Contents

On September 7, 2011, one of our Canadian subsidiaries became party to an order from the Ontario Ministry of Environment (the “MOE”) requiring such subsidiary to remediate certain environmental contamination at a site owned and operated by the subsidiary between 1999 and 2006. Remediation activities had been performed at such site from 1990 to 2011 by the site's former owner which, along with the site’s current owner, are also parties to and bound by the order. On or about July 31, 2013, our subsidiary submitted a conceptual remedial action plan to the MOE with respect to the site outlining proposed investigation and remediation activities. On September 10, 2013, the MOE responded, indicating that it concurred with the conceptual remedial action plan, but requesting some additional information. Although we believe the conceptual remediation action plan is reasonable, there can be no assurance that the plan will not be required to be modified in the future, which could increase the costs of remediation, perhaps significantly.

From time to time, we may be involved in routine legal proceedings, as well as demands, claims and threatened litigation, that arise in the normal course of our business. The ultimate outcome of any litigation is uncertain and unfavorable outcomes could have a negative impact on our results of operations and financial condition. Regardless of outcome, litigation can have an adverse impact on us as a result of incurrence of defense costs, diversion of management resources and other factors. We record liabilities for legal proceedings when a loss becomes probable and the amount of loss can be reasonably estimated.

See also Note 8 of Notes to Consolidated Financial Statements.
     
Item 4. Mine Safety Disclosures.

Not applicable.

33

Table of Contents


PART II
 
Item 5.   Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.
 
Market Information
 
Our common stock is traded on the Nasdaq Global Select Market under the symbol SANM. The following table lists the high and low intra-day prices for our common stock as reported on NASDAQ.

2013
 
High
 
Low
First quarter
 
$
11.13

 
$
7.58

Second quarter
 
$
12.14

 
$
9.12

Third quarter
 
$
14.60

 
$
10.18

Fourth quarter
 
$
18.44

 
$
14.29


2012
 
High
 
Low
First quarter
 
$
9.64

 
$
6.01

Second quarter
 
$
12.55

 
$
9.28

Third quarter
 
$
11.70

 
$
6.62

Fourth quarter
 
$
9.59

 
$
7.02

 
As of November 12, 2013, we had approximately 1,152 holders of record of our common stock. On November 12, 2013, the last reported sales price of our common stock on the Nasdaq Global Select Market was $15.43 per share.

The following graph compares the cumulative 5-year total return provided shareholders on our common stock relative to the cumulative total returns of the S&P 500 index and the NASDAQ Electronic Components index. An investment of $100 (with reinvestment of all dividends) is assumed to have been made in our common stock on September 27, 2008 and in each of the indexes on September 30, 2013 and its relative performance is tracked through September 28, 2013.
 

34

Table of Contents

                                           
* $100 invested on 9/27/2008 in stock or 9/30/08 in index, including reinvestment of dividends. Indexes calculated on month end basis

Copyright @ 2013 S&P, a division of The McGraw-Hill Companies Inc. All rights reserved.

 
 
9/27/2008
 
10/3/2009
 
10/2/2010
 
10/1/2011
 
9/29/2012
 
9/28/2013
Sanmina Corporation
 
100.00

 
83.13

 
122.05

 
67.89

 
86.48

 
178.25

S&P 500
 
100.00

 
93.09

 
102.55

 
103.72

 
135.05

 
161.17

NASDAQ Electronic Components
 
100.00

 
109.94

 
117.24

 
114.40

 
122.35

 
152.26


The stock price performance included in this graph is not necessarily indicative of future stock price performance.
 
Dividends
 
We have never declared or paid cash dividends on our common stock. We currently expect to retain future earnings for use in the operation and expansion of our business and do not anticipate paying cash dividends in the foreseeable future. Additionally, our ability to pay dividends is limited pursuant to covenants contained in our various debt agreements. See also “Item 7-Management's Discussion and Analysis of Financial Condition and Results of Operations-Liquidity and Capital Resources.”
 

35

Table of Contents

Item 6.   Selected Financial Data

The following selected financial data should be read in conjunction with “Item 7-Management's Discussion and Analysis of Financial Condition and Results of Operations” and “Item 8-Financial Statements and Supplementary Data,” included elsewhere in this Form 10-K.
 
FIVE YEAR SELECTED FINANCIAL HIGHLIGHTS
 
Consolidated Statements of Operations Data:
 
 
Year Ended
 
September 28, 2013
 
September 29, 2012
 
October 1, 2011
 
October 2, 2010
 
October 3, 2009
 
(In thousands, except per share data)
Net sales
$
5,917,124

 
$
6,093,334

 
$
6,602,411

 
$
6,318,691

 
$
5,177,481

Operating income (loss)
$
157,629

 
$
137,490

 
$
211,997

 
$
204,799

 
$
(4,656
)
Income (loss) from continuing operations before income taxes
$
103,406

 
$
49,943

 
$
99,538

 
$
139,242

 
$
(112,570
)
Provision for (benefit from) income taxes (1)
24,055

 
(130,291
)
 
30,621

 
16,807

 
25,252

Net income (loss)
$
79,351

 
$
180,234

 
$
68,917

 
$
122,435

 
$
(137,822
)
Net income (loss) per share:
 

 
 

 
 

 
 

 
 

Basic
$
0.96

 
$
2.22

 
$
0.86

 
$
1.55

 
$
(1.67
)
Diluted
$
0.93

 
$
2.16

 
$
0.83

 
$
1.48

 
$
(1.67
)
Shares used in computing per share amounts:
 
 
 
 
 
 
 
 
 
Basic
82,834

 
81,284

 
80,345

 
79,195

 
82,528

Diluted
85,403

 
83,495

 
83,158

 
82,477

 
82,528


 (1) In 2012 and 2013, the Company concluded that it was more likely than not that it would be able to realize the benefit of a portion of its deferred tax assets in the future. As a result, the Company released $158.7 million and $21.5 million of the valuation allowance attributable to certain U.S. and foreign deferred tax assets and net operating losses in 2012 and 2013, respectively.

Consolidated Balance Sheet Data:
 
 
As of
 
September 28, 2013
 
September 29, 2012
 
October 1, 2011
 
October 2, 2010
 
October 3, 2009
 
(In thousands)
Cash and cash equivalents
$
402,875

 
$
409,618

 
$
640,288

 
$
592,812

 
$
899,151

Net working capital
$
997,864

 
$
1,106,752

 
$
1,363,361

 
$
1,338,666

 
$
1,280,136

Total assets
$
2,995,848

 
$
3,167,786

 
$
3,353,973

 
$
3,301,796

 
$
3,123,897

Long-term debt (excluding current portion)
$
562,512

 
$
837,364

 
$
1,182,308

 
$
1,240,666

 
$
1,262,014

Stockholders' equity
$
1,091,564

 
$
963,781

 
$
770,517

 
$
661,601

 
$
519,070



36

Table of Contents

Item 7.   Management's Discussion and Analysis of Financial Condition and Results of Operations
 
This report contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. These statements relate to our expectations for future events and time periods. All statements other than statements of historical fact are statements that could be deemed to be forward-looking statements, including any statements regarding trends in future revenue or results of operations, gross margin, operating margin, expenses, earnings or losses from operations, cash flow, synergies or other financial items; any statements of the plans, strategies and objectives of management for future operations; any statements concerning developments, performance or industry ranking; any statements regarding future economic conditions or performance; any statements regarding pending legal proceedings and environmental remediations; any statements regarding the financial impact of customer bankruptcies; any statements regarding our expectations for future interest expense; any statements regarding the timing of closing of future cash outlays for and benefits of acquisitions; any statements about future redemptions or repurchases of debt and stock; any statements concerning the adequacy of our current liquidity and the availability of additional sources of liquidity; any statements of expectation or belief; and any statements of assumptions underlying any of the foregoing. Generally, the words “anticipate,” “believe,” “plan,” “expect,” “future,” “intend,” “may,” “will,” “should,” “estimate,” “predict,” “potential,” “continue” and similar expressions identify forward-looking statements. Our forward-looking statements are based on current expectations, forecasts and assumptions and are subject to the risks and uncertainties contained in Part I, Item 1A of this report. As a result, actual results could vary materially from those suggested by the forward looking statements. We undertake no obligation to publicly disclose any revisions to these forward-looking statements to reflect events or circumstances occurring subsequent to filing this report with the Securities and Exchange Commission.
 
Overview
 
We are a leading independent global provider of integrated manufacturing solutions, components, products and repair, logistics and after-market services. Our revenue is generated from sales of our services primarily to original equipment manufacturers (OEMs) in the following industries: communications networks; computing and storage; multimedia; industrial and semiconductor capital equipment; defense and aerospace; medical; clean technology and automotive.

Our operations are managed as two businesses:

1) Integrated Manufacturing Solutions (IMS). IMS is a reportable segment consisting of printed circuit board assembly and test, final system assembly and test, and direct-order-fulfillment.

2) Components, Products and Services (CPS). Components include interconnect systems (printed circuit board fabrication, backplane and cable assemblies) and mechanical systems (enclosures, precision machining and plastic injection molding); Products include memory and solid state drive products from Viking Technology, defense and aerospace products from SCI Technology, storage products from Newisys and optical and RF (Radio Frequency) modules; and Services include design, engineering, logistics and repair services.

In accordance with the accounting rules for segment reporting, our only reportable segment is IMS, which represented 80% of our total revenue in 2013. Our CPS business consists of multiple operating segments which do not meet the quantitative thresholds for being presented as reportable segments. Therefore, financial information for these operating segments is presented in a single category entitled “Components, Products and Services”. Effective in the fourth quarter of 2013, the Optical and RF modules group was moved to CPS (previously included in IMS). The Optical and RF modules group offers customers engineering solutions and product designs, including joint product design services with customers. As a result, this group creates intellectual property that can be used in proprietary designs and products similar to the other product businesses in CPS.

All references in this section to years refer to our fiscal years ending on the last Saturday of each year closest to September 30th. Fiscal 2013, 2012 and 2011 are each 52 weeks.

Our strategy is to leverage our comprehensive service offering, advanced technologies, and global capabilities to further penetrate diverse end markets that we believe offer significant growth opportunities and have complex products that require higher value-added services. We believe this strategy differentiates us from our competitors and will drive more sustainable revenue growth and provide opportunities for us to ultimately achieve operating margins that exceed industry standards.

There are many challenges to successfully executing our strategy. For example, we compete with a number of companies in each of our key end markets. These include companies that are much larger than we are and smaller companies

37

Table of Contents

that focus on a particular niche. Although we believe we are well-positioned in each of our key end markets and seek to differentiate ourselves from our competitors, competition remains intense and profitably growing our revenues has been challenging as evidenced by declining revenues in each of the last two years. Additionally, further growing and leveraging our CPS business to improve our operating margins continues to be an integral part of our strategy. Although our CPS revenue grew 5% in 2013 and gross margins improved by 200 basis points, we believe this business is capable of delivering much better results. We continue to address these challenges on both a short-term and long-term basis.
    
In late 2008, the business environment became challenging due to adverse global economic conditions. These conditions slowed global economic growth and resulted in recessions in many locations, including the U.S., Europe and certain countries in Asia. These conditions materially and adversely impacted our financial condition and results of operations for 2009. Global economic conditions improved throughout 2010, contributing to a substantial increase in our business volume. As a result of this increase in business volume and the realization of benefits from our previous restructuring actions, our net sales and gross profit increased significantly during 2010 and we had our first profitable year since 2001. We continued to be profitable in 2011, 2012 and 2013 despite an inconsistent economic environment due to high levels of unemployment, concerns about debt levels and possible recessions in certain countries, and other factors. These conditions have resulted in reduced demand for many of our customers' products, causing these customers to reduce or reschedule their orders with us. We have experienced fluctuations in our results of operations in the past and may continue to experience such fluctuations in the future.
 
During 2012 and 2013, we reduced our net debt obligations by $655 million, which has resulted in significant interest expense savings. For example, interest expense for 2013 was $41.0 million, compared to $71.7 million for 2012 and $99.1 million for 2011. Despite the significant cash outlay required to reduce our debt, our total sources of liquidity at the end of 2013 were $853 million, which is an increase of $47 million over this same two-year time period. This increase is primarily attributable to cash generated from operations of over $500 million and increased capacity from short-term borrowing facilities of $284 million. In addition to our current sources of liquidity, we believe we have sufficient access to additional sources of capital should the need arise.

A relatively small number of customers have historically generated a significant portion of our net sales. Sales to our ten largest customers represented approximately 50% of our net sales in 2013, 2012 and 2011. A single customer represented 10% or more of our net sales in each of 2013 and 2012. A different customer represented 10% or more of our net sales in 2011.

We typically generate a significant portion of our net sales from products manufactured in our foreign operations. Net sales generated from foreign operations were approximately 80% of our total net sales in 2013, 2012 and 2011. The concentration of foreign operations has resulted primarily from a desire on the part of many of our customers to require production in lower cost locations in regions such as Asia, Latin America and Eastern Europe. We expect this concentration to continue.
 
Historically, we have had substantial recurring sales to existing customers. We typically enter into supply agreements with our major OEM customers. These agreements generally have terms ranging from three to five years and cover the manufacture of a range of products. Under these agreements, a customer typically agrees to purchase its requirements for specific products in particular geographic areas from us. These agreements generally do not obligate the customer to purchase minimum quantities of products and in some circumstances provide for cost reduction objectives during the term of the agreement, which can have the effect of reducing revenue and profitability from such arrangements.
 
 

38

Table of Contents

Critical Accounting Policies and Estimates
 
Management's discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements which have been prepared in accordance with accounting principles generally accepted in the United States. We review the accounting policies used in reporting our financial results on a regular basis. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, net sales and expenses and related disclosure of contingent liabilities. On an ongoing basis, we evaluate the process used to develop estimates for certain reserves and contingent liabilities, including those related to product returns, accounts receivable, inventories, income taxes, warranty obligations, environmental matters, restructuring, contingencies and litigation. We base our estimates on historical experience and various other assumptions that we believe are reasonable for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Our actual results may differ materially from these estimates.
 
We believe the following critical accounting policies reflect the more significant judgments and estimates used by us in preparing our consolidated financial statements:

Accounts Receivable and Other Related Allowances— We estimate uncollectible accounts, product returns and other adjustments related to current period net sales to establish valuation allowances. In making these estimates, we analyze the creditworthiness of our customers, past experience, specific facts and circumstances, and the overall economic climate in the industries we serve. If actual uncollectible accounts, product returns or other adjustments differ significantly from our estimates, the amount of sales or operating expenses we report would be affected. One of our most significant credit risks is the ultimate realization of our accounts receivable. This risk is mitigated by (i) a significant portion of sales to financially sound companies, (ii) ongoing credit evaluation of our customers, (iii) frequent contact with our customers, especially our most significant customers, which enables us to monitor changes in their business operations and to respond accordingly and (iv) obtaining, in certain cases, a guaranty from a customer's parent entity. To establish our allowance for doubtful accounts, we evaluate credit risk related to specific customers based on their financial condition and the current economic environment; however, we are not able to predict the inability of our customers to meet their financial obligations to us. We believe the allowances we have established are adequate under the circumstances; however, a change in the economic environment or a customer's financial condition could cause our estimates of allowances, and consequently the provision for doubtful accounts, to change, which could have a significant adverse impact on our financial position and/or results of operations. Our allowance for product returns and other adjustments is primarily established using historical data.
 
Inventories— We state inventories at the lower of cost (first-in, first-out method) or market value. Cost includes raw materials, labor and manufacturing overhead. We regularly evaluate the carrying value of our inventories and make provisions to reduce excess and obsolete inventories to their estimated net realizable values. The ultimate realization of inventory carrying amounts is affected by changes in customer demand for inventory that customers are not contractually obligated to purchase and inventory held for specific customers who are experiencing financial difficulties. Inventory write-downs are recorded based on forecasted demand, past experience with specific customers, the ability to redistribute inventory to other programs or back to our suppliers, and whether customers are contractually obligated and have the ability to pay for the related inventory. Certain payments received from customers for inventories that have not been shipped to customers or otherwise disposed of are netted against inventory.
 
We procure inventory based on specific customer orders and forecasts. Customers have limited rights of modification (for example, cancellations) with respect to these orders. Customer modifications of orders affecting inventory previously procured by us and our purchases of inventory beyond customer needs may result in excess and obsolete inventory. Although we may be able to use some excess inventory for other products we manufacture, a portion of the cost of this excess inventory may not be returned to the vendors or recovered from customers. Write-offs or write-downs of inventory could relate to:

changes in customer demand for inventory, such as cancellation of orders, and our purchases of inventory beyond customer needs that result in excess quantities on hand that we are not able to return to the vendor, use to fulfill orders from other customers or charge back to the customer;
inventory held for specific customers who are experiencing financial difficulties; and
declines in the market value of inventory.

Our practice is to dispose of excess and obsolete inventory as soon as practicable after such inventory has been identified as having no value to us.
 
Property, Plant and Equipment—We review property, plant and equipment for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset or asset group may not be recoverable. An asset or asset

39

Table of Contents

group is considered impaired if its carrying amount exceeds the undiscounted future net cash flows the asset or asset group is expected to generate. If an asset or asset group is considered impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the asset or asset group exceeds its fair value. An asset group is the unit of accounting which represents the lowest level for which identifiable cash flows are largely independent of the cash flows of other groups of assets. For vertically integrated plants, each individual plant, together with the other plants with which it is vertically integrated, is an asset group. For all other plants, each individual plant is an asset group. For asset groups for which a building is the primary asset, we estimate fair value primarily based on data provided by commercial real estate brokers. For other assets, we estimate fair value based on projected discounted future net cash flows. Management applies significant judgment in estimating future cash flows.
 
Income Taxes— We estimate our income tax provision or benefit in each of the jurisdictions in which we operate, including estimating exposures related to examinations by taxing authorities. We believe our accruals for tax liabilities are adequate for all open years based on our assessment of many factors including past experience and interpretations of tax law applied to the facts of each matter. Although we believe our accruals for tax liabilities are adequate, tax regulations are subject to interpretation and the tax controversy process is inherently lengthy and uncertain; therefore, our assessments can involve a series of complex judgments about future events and rely heavily on estimates and assumptions. To the extent the probable tax outcome of these matters changes, such changes in estimates will impact our income tax provision in the period in which such determination is made. We only recognize or continue to recognize tax positions that meet a “more likely than not” threshold of being upheld. Interest and penalties related to unrecognized tax benefits are recognized as a component of income tax expense.
 
We must also make judgments regarding the realizability of deferred tax assets. The carrying value of our net deferred tax assets is based on our belief that it is more likely than not that we will generate sufficient future taxable income in certain jurisdictions to realize these deferred tax assets. We evaluate positive and negative evidence each reporting period when assessing the need for a valuation allowance. A valuation allowance is established for deferred tax assets when we believe realization of such assets is not more likely than not. Our judgments regarding future taxable income may change due to changes in market conditions, new or modified tax laws, tax planning strategies or other factors. If our assumptions, and consequently our estimates, change in the future, the valuation allowances we have established may be increased or decreased, resulting in a respective increase or decrease in income tax expense. As a result of our analysis of the positive and negative evidence available at the end of 2013 and 2012, we released $21.5 million and $158.7 million, respectively, of our valuation allowance against certain of our U.S. and foreign deferred tax assets and net operating losses. We will continue to evaluate all evidence in future periods to determine if further release of the valuation allowance is warranted.

Our effective tax rate is highly dependent upon the amount and geographic distribution of our worldwide income or losses, the tax regulations, rates and holidays in each geographic region, the utilization of net operating losses, the availability of tax credits and carryforwards, and the effectiveness of our tax planning strategies.
 



40

Table of Contents


Results of Operations

Years Ended September 28, 2013, September 29, 2012 and October 1, 2011.
 
The following table presents our key operating results.

 
Year Ended
 
September 28,
2013
 
September 29,
2012
 
October 1,
2011
 
(In thousands)
Net sales
$
5,917,124

 
$
6,093,334

 
$
6,602,411

Gross profit
$
426,817

 
$
435,782

 
$
510,351

Gross margin
7.2
%
 
7.2
%
 
7.7
%
Operating expenses
$
269,188

 
$
298,292

 
$
298,354

Operating income
$
157,629

 
$
137,490

 
$
211,997

Operating margin
2.7
%
 
2.3
%
 
3.2
%
Net income
$
79,351

 
$
180,234

 
$
68,917

 
Net Sales
 
Net sales decreased from $6.1 billion for 2012 to $5.9 billion for 2013, a decrease of 2.9%. Net sales decreased from $6.6 billion for 2011 to $6.1 billion for 2012, a decrease of 7.7%. Sales by end market were as follows:

 
Year Ended
 
2013 vs. 2012
 
2012 vs. 2011
 
September 28, 2013
 
September 29, 2012
 
October 1, 2011
 
Increase/(Decrease)
 
Increase/(Decrease)
 
(Dollars in thousands)
Communications
$
2,858,343

 
$
2,858,827

 
$
3,134,550

 
$
(484
)
 
 %
 
$
(275,723
)
 
(8.8
)%
Industrial, Defense and Medical
1,590,875

 
1,547,127

 
1,609,370

 
43,748

 
2.8
 %
 
(62,243
)
 
(3.9
)%
Computing and Storage
811,279

 
966,851

 
913,062

 
(155,572
)
 
(16.1
)%
 
53,789

 
5.9
 %
Multimedia
656,627

 
720,529

 
945,429

 
(63,902
)
 
(8.9
)%
 
(224,900
)
 
(23.8
)%
Total
$
5,917,124

 
$
6,093,334

 
$
6,602,411

 
$
(176,210
)
 
(2.9
)%
 
$
(509,077
)
 
(7.7
)%

Comparison of 2013 to 2012

Sales to customers in our computing and storage and multimedia end markets decreased significantly from 2012 to 2013 primarily as a result of reduced demand from existing customers and the wind-down of certain customer programs. These decreases were partially offset by growth in our services business within the industrial, defense and medical end market.

Comparison of 2012 to 2011

Sales to customers in our communications end market decreased significantly from 2011 to 2012 primarily as a result of reduced demand from existing customers, particularly for wireless communications products. Sales in the multimedia market decreased significantly from 2011 to 2012 primarily as a result of reduced demand for set-top boxes. Sales in our industrial, defense and medical end market decreased from 2011 to 2012 primarily due to weaker demand for semiconductor capital equipment. The increase from 2011 to 2012 in our computing and storage end market was primarily attributable to increased demand from existing customers, both for established programs and new program wins for new technologies introduced by our customers.

Gross Margin
 
Gross margin was 7.2%, 7.2% and 7.7% in 2013, 2012 and 2011, respectively. In 2013, the gross margin for our CPS business improved to 10.8%, from 8.8% in 2012. This improvement resulted primarily from better business mix, the effect of previous restructuring actions, and increased business volume. The improvement in CPS gross margin was offset by a gross

41

Table of Contents

margin decrease in our IMS segment of 50 basis points, from 6.6% in 2012 to 6.1% in 2013. This decrease resulted primarily from decreased sales. The decrease in gross margin from 2011 to 2012 was primarily attributable to decreased sales, especially for our CPS business which typically has higher contribution margins than our integrated manufacturing solutions. We have experienced fluctuations in gross margin in the past and may continue to do so in the future. Fluctuations in our gross margins may be caused by a number of factors, including:

Changes in customer demand and sales volumes for our vertically integrated system components and subassemblies;
Changes in the overall volume of our business;
Changes in the mix of high and low margin products demanded by our customers;
Parts shortages and operational disruption caused by natural disasters;
Greater competition in the EMS industry and pricing pressures from OEMs due to greater focus on cost reduction;
Provisions for excess and obsolete inventory;
Level of operational efficiency;
Pricing pressure in the electronics industry resulting from economic conditions , with EMS companies competing more aggressively on cost to obtain new or maintain existing business;
Wage inflation and rising materials costs; and
Our ability to transition manufacturing and assembly operations to lower cost regions in an efficient manner.

Selling, General and Administrative
 
Selling, general and administrative expenses were $238.1 million, $240.9 million and $247.1 million in 2013, 2012 and 2011, respectively. As a percentage of net sales, selling, general and administrative expenses were 4.0% for 2013 and 2012, and 3.7% for 2011. The decrease in absolute dollars from 2012 to 2013 was primarily attributable to reduced professional fees partially offset by increased bad debt expense associated with a distressed customer. The decrease in absolute dollars from 2011 to 2012 was primarily attributable to lower personnel-related costs. 

Research and Development
 
Research and development expenses were $25.6 million, $21.9 million and $20.8 million in 2013, 2012 and 2011, respectively. As a percentage of net sales, research and development expenses were 0.4% for 2013 and 2012, and 0.3% for 2011. The increase in absolute dollars in each year was primarily attributable to additional headcount for new projects in our computing and storage end market.

Restructuring
 
Restructuring Plans - 2012

In 2012, we initiated restructuring plans related to four plant closures and business reorganizations. Costs associated with these plans are expected to be $29.8 million and to include employee severance, costs related to facilities, asset impairment charges and other exit costs. In connection with actions taken to date under these plans, we have recorded employee termination benefits of $14.1 million for 2,150 employees, $9.9 million of costs related to facilities and $4.5 million of asset impairment charges. These plans are expected to be completed within the next six months. As of September 28, 2013, $0.7 million of severance remains payable and is expected to be paid in early 2014.

Restructuring Plans — Prior to 2012

Due to completion of all actions under restructuring plans initiated prior to 2012 and immateriality of the remaining accrual balance related to such plans, these plans have been combined for disclosure purposes. We expect to pay the majority of accrued restructuring costs by the end of 2015. In connection with these plans, we expect to incur restructuring costs in future periods associated primarily with former sites for which the Company is or may be responsible for environmental remediation and vacant facilities. Costs incurred with respect to vacant facilities consist primarily of 1) costs to maintain vacant facilities that are owned until such facilities can be sold and 2) the portion of the Company's lease payments and operating costs that have not been recovered due to the absence of sublease income for vacant leased properties.


42

Table of Contents

Below is a summary of restructuring costs associated with facility closures and other consolidation efforts:
 
2012 Restructuring Plan
 
Prior to 2012 Restructuring Plans
 
Total
 
(In thousands)
Accrual balance at October 2, 2010
$

 
$
6,532

 
$
6,532

Employee severance and benefits

 
9,041

 
9,041

Leases and facilities shutdown costs

 
19,683

 
19,683

Non-cash charges

 
5,725

 
5,725

Cash paid for employee terminations

 
(8,144
)
 
(8,144
)
Cash paid for leases and facilities shutdown costs

 
(19,369
)
 
(19,369
)
Non-cash charges

 
(5,725
)
 
(5,725
)
Accrual balance at October 1, 2011

 
7,743

 
7,743

Employee severance and benefits
11,618

 
827

 
12,445

Leases and facilities shutdown costs
545

 
14,465

 
15,010

Non-cash charges
3,482

 
3,396

 
6,878

Cash paid for employee terminations
(1,317
)
 
(5,776
)
 
(7,093
)
Cash paid for leases and facilities shutdown costs
(545
)
 
(12,568
)
 
(13,113
)
Non-cash charges
(3,482
)
 
(3,396
)
 
(6,878
)
Accrual balance at September 29, 2012
10,301

 
4,691

 
14,992

Employee severance and benefits
2,426

 
358

 
2,784

Leases and facilities shutdown costs
7,562

 
10,223

 
17,785

Non-cash charges
2,773

 
1,568

 
4,341

Cash paid for employee terminations
(12,041
)
 
(573
)
 
(12,614
)
Cash paid for leases and facilities shutdown costs
(7,566
)
 
(9,103
)
 
(16,669
)
Non-cash charges
(2,773
)
 
(1,568
)
 
(4,341
)
Accrual balance at September 28, 2013
$
682

 
$
5,596

 
$
6,278

    
Our IMS segment incurred restructuring costs under all restructuring plans of $11.9 million, $19.0 million and $14.2 million for 2013, 2012 and 2011, respectively.

The recognition of restructuring charges requires us to make judgments and estimates regarding the nature, timing and amount of costs associated with planned exit activities, including estimates of severance and benefit payments, environmental remediation costs and sublease income. Our estimates of future liabilities may change, requiring us to record additional restructuring charges or reduce the amount of liabilities already recorded.

Amortization of Intangible Assets
 
During 2013, 2012 and 2011, we recorded amortization of intangible assets of $1.9 million, $3.1 million and $3.8 million, respectively. Intangible assets consist primarily of intellectual property and customer relationships obtained through acquisitions. The decrease in amortization expense of $1.2 million from 2012 to 2013 was primarily due to certain intangible assets from previous acquisitions becoming fully amortized and a write-off of $0.6 million of intangible assets due to closure of a plant in 2012.

Asset Impairments
 
During 2013, 2012 and 2011, we recorded asset impairment charges of $2.1 million, $2.4 million and $0.5 million, respectively, related to declines in the fair value of certain real properties being marketed for sale below the carrying amount of such properties.


43

Table of Contents

Gain on Sales of Long-lived Assets

During 2013, 2012 and 2011, we recognized $23.4 million, $1.3 million and $3.5 million, respectively, of gains primarily from the sales of certain real properties.

Interest Income and Expense
 
Interest income was $1.0 million, $1.4 million and $1.9 million in 2013, 2012 and 2011, respectively. The decrease in each year was due to lower interest rates and average cash and cash equivalents balances.
 
Interest expense was $41.0 million, $71.7 million and $99.1 million in 2013, 2012 and 2011, respectively. The decrease from 2012 to 2013 was primarily due to the redemption of $257.4 million of long-term debt in 2013. The decrease from 2011 to 2012 was primarily due to the redemption of $400 million of long-term debt in 2012.
 
Other Income (Expense), net
 
Other income (expense), net was $(12.8) million, $(0.3) million and $0.9 million in 2013, 2012 and 2011, respectively. The following table summarizes the major components of other income (expense), net (in thousands):

 
Year ended
 
September 28, 2013
 
September 29, 2012
 
October 1, 2011
Foreign exchange gains (losses)
$
(3,091
)
 
$
(4,144
)
 
$
435

Loss from dedesignation of interest rate swap
(14,903
)
 

 

Other, net
5,162

 
3,853

 
457

Total
$
(12,832
)
 
$
(291
)
 
$
892


We have interest rate swaps with an aggregate notional amount of $257 million that were entered into in 2007 to hedge LIBOR-based variable rate interest payments expected to occur through June 15, 2014. During the first quarter of 2013, we determined, based on our intention of redeeming $257.4 million of our debt due in 2014, that it was no longer probable that LIBOR-based, variable rate interest payments would occur on $257 million of debt through June 15, 2014. Accordingly, we dedesignated our interest rate swaps in their entirety in the first quarter of 2013 and recorded a charge of $14.9 million, representing the portion of the value of the interest rate swaps previously recorded in accumulated other comprehensive income for which it was no longer probable that LIBOR-based variable rate interest payments would occur. During the second quarter of 2013, we redeemed our 2014 Notes in full using a combination of cash on hand and borrowings under our revolving credit facility (LIBOR-based, variable rate facility). Therefore, LIBOR-based variable rate payments are only expected to occur on forecasted borrowings under our revolving credit facility and only during the period of time these borrowings are expected to be outstanding.
We reduce our exposure to currency fluctuations through the use of foreign currency hedging instruments; however, hedges are established based on forecasts of foreign currency balances. To the extent actual amounts differ from forecasted amounts, we will have exposure to currency fluctuations, resulting in foreign exchange gains or losses.
 
Loss on Extinguishments of Debt
 
In 2013, we fully redeemed $257.4 million of long term debt due in 2014 and recognized a loss on extinguishment of $1.4 million, consisting primarily of the write-off of unamortized debt issuance costs.

In 2012, we fully redeemed $400 million of long-term debt due in 2016 and recognized a loss on extinguishment of $16.9 million, consisting of redemption premiums of $10.9 million and a write-off of unamortized debt issuance costs of $6.0 million.

In 2011, we repurchased or fully redeemed $580 million of our debt prior to maturity and recognized a loss on extinguishment of $16.1 million, consisting of redemption premiums of $9.4 million, third party costs of $1.3 million and a write-off of unamortized debt issuance costs of $5.4 million.


44

Table of Contents

Provision for (benefit from) Income Taxes
 
We recorded an income tax provision of $24.1 million in 2013, an income tax benefit of $130.3 million in 2012 and an income tax provision of $30.6 million in 2011. Our effective tax rates were 23.3%, (260.9)% and 30.8% for 2013, 2012 and 2011, respectively. The tax provision for 2013 was lower than the amount expected based on the federal statutory rate primarily due to a partial release of our deferred tax assets valuation allowance of $21.5 million.

The tax benefit for 2012 was primarily due to a $158.7 million partial release of our deferred tax asset valuation allowance, as discussed further below.

Prior to 2012, based on historical evidence (primarily cumulative losses), we recorded a valuation allowance against our deferred tax assets in the U.S. and certain foreign jurisdictions. A valuation allowance is required to be established or maintained when, based on currently available information and other factors, it is more likely than not that all or a portion of the deferred tax assets will not be realized. We assess our valuation allowance against deferred tax assets on a regular basis. We consider all available positive and negative evidence, including future reversals of temporary differences, projected future taxable income, tax planning strategies and recent financial results. During the fourth quarters of 2013 and 2012, we concluded that it was more likely than not that we would be able to realize the benefit of a portion of our deferred tax assets in the future. We based this conclusion on recent historical book and taxable income, recent global restructuring and projections of future operating income. As a result, we released $21.5 million and $158.7 million during 2013 and 2012, respectively, of the valuation allowance attributable to certain U.S. and foreign deferred tax assets and net operating losses. We will continue to evaluate all evidence in future periods to determine if a further release of the valuation allowance is warranted.
 
Liquidity and Capital Resources 
 
Year Ended
 
September 28,
2013
 
September 29,
2012
 
October 1,
2011
 
 
 
(In thousands)
 
 
Net cash provided by (used in):
 
 
 
 
 
Operating activities
$
317,889

 
$
215,413

 
$
234,908

Investing activities
(42,870
)
 
(78,027
)
 
(98,105
)
Financing activities
(279,259
)
 
(366,813
)
 
(88,954
)
Effect of exchange rate changes
(2,503
)
 
(1,243
)
 
(373
)
Increase (decrease) in cash and cash equivalents
$
(6,743
)
 
$
(230,670
)
 
$
47,476


Key working capital management measures
 
As of
 
September 28,
2013
 
September 29,
2012
Days sales outstanding (1)
55
 
58
Inventory turns (2)
7.0
 
7.1
Accounts payable days (3)
61
 
57
Cash cycle days (4)
46
 
52

(1)
Days sales outstanding (a measure of how quickly we collect our accounts receivable), or "DSO", is calculated as the ratio
of average accounts receivable, net, to average daily net sales for the quarter.

(2)
Inventory turns (annualized) are calculated as the ratio of four times our cost of sales for the quarter to average
inventory.

(3)
Accounts payable days (a measure of how quickly we pay our suppliers), or "DPO", is calculated as the ratio of 365 days to accounts payable turns, in which accounts payable turns is calculated as the ratio of four times our cost of sales for the quarter to average accounts payable.

(4)
Cash cycle days is calculated as the ratio of 365 days to inventory turns, plus days sales outstanding minus accounts
payable days.


45

Table of Contents

Cash and cash equivalents were $402.9 million at September 28, 2013 and $409.6 million at September 29, 2012. Our cash levels vary during any given period depending on the timing of collections from customers and payments to suppliers, the extent and timing of borrowing activities and other factors. Working capital was $1.0 billion at September 28, 2013 and $1.1 billion at September 29, 2012.

Net cash provided by operating activities was $317.9 million, $215.4 million and $234.9 million for 2013, 2012 and 2011, respectively. Cash flows from operating activities consists of: 1) net income adjusted to exclude non-cash items such as depreciation and amortization, stock-based compensation expense, etc., and 2) changes in net operating assets, which are comprised of accounts receivable, inventories, prepaid expenses and other assets, accounts payable, accrued liabilities and other long-term liabilities.

During 2013, we generated $180.3 million of cash from net income, excluding non-cash items, and $137.6 million of cash from the reduction of our net operating assets, resulting primarily from a decrease in inventories and accounts receivable of $44.3 million and $56.8 million, respectively, and an increase in accounts payable of $22.3 million. These changes were primarily due to our continued emphasis on working capital management and, to a lesser extent, decreased business volume. Our DSO (a measure of how quickly we collect our accounts receivable) decreased from 58 days at the end of 2012 to 55 days at the end of 2013 primarily as a result of better collections performance. Our AP days (a measure of how quickly we pay our suppliers) were 61 days and 57 days at the end of 2013 and 2012, respectively, due to a change in timing of payments to certain suppliers and a favorable change in the composition of accounts payable from suppliers with which we have shorter payment terms to suppliers with longer payment terms.

In 2012, we generated $163.3 million of cash from net income, excluding non-cash items, and $52.1 million of cash from the reduction of our net operating assets, resulting primarily from a decrease in inventories and accounts receivable of $63.4 million and $12.9 million, respectively, partially offset by a decrease in accounts payable of $48.4 million. These decreases were caused primarily by decreased business volume in 2012. AP days were 57 days at the end of both periods and inventory turns were 7.1 and 7.0 for 2012 and 2011, respectively. Our DSO increased from 55 days at October 1, 2011 to 58 days at September 29, 2012. The increase resulted primarily from an unfavorable change in the composition of accounts receivable from customers with shorter payment terms to customers with longer payment terms, partially offset by a favorable shift in the linearity of shipments.

Net cash used in investing activities was $42.9 million, $78.0 million and $98.1 million for 2013, 2012 and 2011, respectively. In 2013, we used $76.0 million of cash for capital expenditures and received proceeds of $33.1 million from asset sales, primarily from a property that was held-for-sale. In 2012, we used $78.6 million of cash for capital expenditures, received proceeds of $4.8 million from asset sales, and made payments of $5.0 million in connection with business combinations.
 
Net cash used in financing activities was $279.3 million, $366.8 million and $89.0 million for 2013, 2012 and 2011, respectively. In 2013, we fully redeemed $257.4 million of debt due in 2014, repaid $37.7 million of net short-term borrowings and reduced our restricted cash by $5.8 million. In 2012, we fully redeemed $400 million of debt due in 2016 for $410.8 million and received net proceeds of $39.5 million in connection with the issuance of $40 million of secured debt.
 
As of September 28, 2013, we had $562.3 million of total debt outstanding under various debt instruments, a net reduction of $295.1 million from September 29, 2012, and a net reduction of $655.3 million from October 1, 2011.

Secured Debt. During the fourth quarter of 2012, we borrowed $40 million using our corporate campus as collateral (Secured Debt due 2015). The secured debt matures in 2015, bears interest at LIBOR plus a spread or the bank's prime rate plus a spread, and includes two one-year renewal options subject to lender's approval.
    
Senior Notes Due 2019. During 2011, we issued $500.0 million aggregate principal amount of senior notes due 2019 (the "2019 Notes"). The 2019 Notes mature on May 15, 2019 and bear interest at an annual rate of 7%, payable semi-annually in arrears in cash.

The 2019 Notes are senior unsecured obligations and are fully and unconditionally guaranteed on a senior, unsecured basis by substantially all of our domestic subsidiaries. We may redeem all or any portion of the 2019 Notes at any time prior to May 15, 2014, at par plus accrued and unpaid interest and a make-whole premium. We may redeem all or any portion of the 2019 Notes beginning on or after May 15, 2014, at redemption prices ranging from 100% to105.25% of principal amount of the 2019 Notes, plus accrued and unpaid interest. Following a change of control, as defined, each holder of the 2019 Notes shall have the right to require us to repurchase all or any portion of such holder's 2019 Notes at a purchase price equal to 101% of the principal amount, plus accrued and unpaid interest.

46

Table of Contents


We entered into an interest rate swap with a single counterparty to hedge our exposure to changes in the fair value of the 2019 Notes resulting from changes in interest rates. The swap agreement, with a notional amount of $500 million and an expiration date of May 15, 2019, was entered into contemporaneously with the 2019 Notes and effectively converts these notes from fixed-rate debt to variable-rate debt. Pursuant to the interest rate swap, we pay the swap counterparty a variable rate equal to the three-month LIBOR plus a spread and receive a fixed rate of 7.0% from the swap counterparty. In accordance with Accounting Standards Codification (ASC) Topic 815, Derivatives and Hedging, the interest rate swap is accounted for as a fair value hedge but is exempt from periodic assessment of hedge effectiveness.

8.125% Senior Subordinated Notes. During 2006, we issued $600 million of 8.125% Senior Subordinated Notes due 2016. During the third quarter of 2011, we redeemed $200 million of these notes and fully redeemed all remaining outstanding notes during 2012 in two separate transactions using primarily cash on hand.

Senior Floating Rate Notes. In 2007, we issued $300 million of Senior Floating Rate Notes due June 15, 2014. We repurchased $42.6 million of these notes in 2009 and the remaining outstanding balance in the second quarter of 2013.

We have interest rate swap agreements with two independent counterparties to hedge interest rate exposure on variable-rate debt. The interest rate swaps were accounted for as cash flow hedges until they were dedesignated in their entirety during the first quarter of 2013 as we determined, based on our intention of redeem the 2014 Notes, that it was no longer probable that LIBOR-based variable rate interest payments would occur on the $257 million of debt through June 15, 2014. However, LIBOR-based variable rate interest payments are expected to be incurred on forecasted borrowings under our revolving credit facility during the period of time these borrowings are expected to be outstanding. The swaps have a notional amount of $257 million and expire in June 2014.

Asset-backed Lending Facility. In 2009, we entered into a Loan, Guaranty and Security Agreement, among us, the financial institutions party thereto from time to time as lenders, and Bank of America, N.A., as agent for such lenders. During the second quarter of 2012, we entered into an Amended and Restated Loan, Guaranty and Security Agreement (the “Loan Agreement”), among us, the financial institutions party thereto from time to time as lenders, and Bank of America, N.A., as agent for such lenders. The Loan Agreement amended and restated our existing Loan, Guaranty and Security Agreement.

The Loan Agreement provides for a $300 million secured asset-backed revolving credit facility with a $100 million letter of credit sublimit. The facility may be increased by an additional $200 million upon obtaining additional commitments from the lenders then party to the Loan Agreement or new lenders. The Loan Agreement expires on March 16, 2017 (the “Maturity Date”).

Loans may be advanced under the Loan Agreement based on a borrowing base derived from specified percentages of the value of eligible accounts receivable and inventory. The borrowing base is subject to certain customary reserves and eligibility criteria. If, at any time, the aggregate principal amount of the loans outstanding plus the face amount of undrawn letters of credit under the Loan Agreement exceed the borrowing base then in effect, we must make a payment or post cash collateral (in the case of letters of credit) in an amount sufficient to eliminate such excess. As of September 28, 2013, there were no borrowings under this facility, $23.1 million in letters of credit were outstanding and we were eligible to borrow $266.4 million.
 
Loans under the Loan Agreement bear interest, at our option, at a rate equal to LIBOR or a base rate equal to Bank of America, N.A.'s announced prime rate, in each case plus a spread. A commitment fee accrues on any unused portion of the facility at a rate per annum based on usage. Interest on loans is payable quarterly in arrears with respect to base rate loans and at the end of an interest period in the case of LIBOR loans. Principal, together with accrued and unpaid interest, is due on the Maturity Date. Our obligations under the Loan Agreement are secured by certain accounts receivable, inventory and other assets.

Short-term Debt

As of September 28, 2013, certain of our foreign subsidiaries had a total of $184 million of short-term borrowing facilities, under which no borrowings were outstanding. The loan agreements contain certain negative covenants that, upon default, permit the bank to deny any further advances or extension of credit or to terminate the loan agreement. These facilities expire at various dates through the second quarter of 2015.

47

Table of Contents


Debt Covenants

Other than our Secured Debt due 2015 which uses certain of our real property as collateral, our debt agreements do not contain financial covenants currently applicable to us, but do include a number of restrictive covenants, including restrictions on incurring additional debt, making investments and other restricted payments, selling assets, paying dividends and redeeming or repurchasing capital stock and debt, subject to certain exceptions. Our Secured Debt Due 2015 requires us to maintain a minimum fixed charge coverage ratio during its term. These covenants could constrain our ability to grow our business through acquisition or engage in other transactions which the covenants would otherwise restrict, including refinancing our existing debt. In addition, such agreements include covenants requiring, among other things, that we file quarterly and annual financial statements with the SEC, comply with all laws, pay all taxes and maintain casualty insurance. If we are not able to comply with all of these covenants, for any reason, some or all of our outstanding debt as well as all amounts payable under our interest rate swaps on such debt, if any, could become immediately due and payable and the incurrence of additional debt under our asset-backed credit facility would not be allowed, any of which could have a material adverse effect on our liquidity and ability to conduct our business. As of September 28, 2013, we were in compliance with these covenants.

Other Liquidity Matters

During 2012 and 2013, we reduced our net debt obligations by approximately $655 million, which has resulted in significant interest expense savings. For example, interest expense was $41.0 million in 2013, compared to $71.7 million in 2012 and $99.1 million in 2011. Despite the significant cash outlay required to reduce our debt, our total sources of liquidity at the end of 2013 were $853 million, which is an increase of $47 million over this same two-year time period. The increase is primarily attributable to cash generated from operations of over $500 million and increased capacity from short-term borrowing facilities of $284 million. Our next long-term debt maturity in the amount of $40 million will be in 2015, after which an aggregate of $500 million in notes will be due in 2019. We may consider early redemptions of our debt in future periods, using either our existing cash or proceeds from additional debt or equity financings.

In March 2013, our Board approved a $100 million stock repurchase program with no expiration date. The timing of repurchases made under the program will depend upon capital needs to support the growth of our business, market conditions and other factors. Although the stock repurchase program is intended to increase stockholder value, purchases of shares made under this program will reduce our liquidity. We did not repurchase any stock under this program in 2013.

Beginning in May 2014, the interest rate swap on our 2019 Notes can be terminated at the option of the swap counterparty upon payment to us of a market termination fee. In such a case, we would no longer pay a variable rate of interest on such notes but would instead pay a fixed rate of 7%, which could be higher than the variable rate at the time of termination.

In the ordinary course of business, we are or may become party to legal proceedings, claims and other contingencies, including environmental and employee matters and examinations by government agencies. As of September 28, 2013, we had accrued liabilities of $22.2 million related to such matters. We cannot accurately predict the outcome of these matters or the amount or timing of cash flows that may be required to defend ourselves or to settle such matters or that these accruals will be sufficient to fully satisfy our contingent liabilities.

As of September 28, 2013, we had a liability of $90.3 million for uncertain tax positions. Our estimate of liabilities for uncertain tax positions is based on a number of subjective assessments, including the likelihood of a tax obligation being assessed, the amount of taxes (including interest and penalties) that would ultimately be payable, and our ability to settle any such obligations on favorable terms. Therefore, the amount of future cash flows associated with uncertain tax positions may be significantly higher or lower than our recorded liability and we are unable to reliably estimate when cash settlement may occur.
 
We have entered into, and continue to enter into, various transactions that periodically require collateral. These obligations have historically arisen from customs, import/export, VAT, utility services, debt financing, foreign exchange contracts and interest rate swaps. We have collateralized, and may from time to time collateralize, such obligations as a result of counterparty requirements or for economic reasons. As of September 28, 2013, we had collateral of $6.3 million in the form of cash against certain of our collateralized obligations. Cash used for collateral reduces our cash available for other purposes.

Our liquidity needs are largely dependent on changes in our working capital, including the extension of trade credit by our suppliers, investments in manufacturing inventory, facilities and equipment, repayments of obligations under outstanding indebtedness and redemptions of our outstanding debt and repurchases of common stock. Our primary sources of liquidity as of September 28, 2013 included: (1) cash of $402.9 million; (2) our $300 million asset-backed credit facility, under which $266.4

48

Table of Contents

million, net of letters of credit and borrowings, was available as of September 28, 2013; (3) foreign short-term borrowing facilities of $184.0 million, which was fully available as of September 28, 2013; and (4) cash generated from operations. In addition, we are actively marketing a portfolio of surplus real estate with an aggregate list price of over $80 million. Proceeds from the sales of properties in this portfolio will provide additional liquidity. However, there can be no assurance as to the amount that may actually be realized or the exact timing of any such receipts.
 
We believe our existing cash resources and other sources of liquidity, together with cash generated from operations, will be sufficient to meet our working capital requirements through at least the next 12 months. Should demand for our services decrease significantly over the next 12 months or should we experience increases in delinquent or uncollectible accounts receivable, our cash provided by operations would be adversely impacted.

As of September 28, 2013, 51% of our cash balance was held by our foreign subsidiaries. Should we choose or need to remit cash to the United States, we could incur tax obligations which would reduce the amount of cash ultimately available to the United States. We believe that cash held in the United States, together with cash available under United States credit facilities and cash from foreign subsidiaries that could be remitted to the United States without tax consequences, will be sufficient to meet our U.S. liquidity needs for at least the next twelve months.

Contractual Obligations
 
The following is a summary of our long-term debt, including interest, and operating lease obligations as of September 28, 2013:
 
 
 
 
Payments Due by Period
 Contractual Obligations
Total
 
Less than 1 year
 
1- 3 years
 
3-5 years
 
More than
5 years
 
(In thousands)
Long-term debt, including interest
$
669,699

 
$
31,788

 
$
82,796

 
$
41,992

 
$
513,123

Operating leases
91,087

 
26,020

 
29,259

 
15,211

 
20,597

Total contractual obligations
$
760,786

 
$
57,808

 
$
112,055

 
$
57,203

 
$
533,720


Interest included above is based on our effective rate after considering both the underlying contractual rate and related interest rate swaps.

We also have outstanding firm purchase orders with certain suppliers for the purchase of inventory. These purchase orders are generally short-term in nature. Orders for standard, or catalog, items can typically be canceled with little or no financial penalty. Our policy regarding non-standard or customized items dictates that such items are only ordered specifically for customers who have contractually assumed liability for the inventory. In addition, a substantial portion of catalog items covered by our purchase orders are procured for specific customers based on their purchase orders or a forecast under which the customer has contractually assumed liability for such material. Accordingly, the amount of liability from purchase obligations under these purchase orders is not expected to be significant or meaningful. As of September 28, 2013, we had an insignificant amount of capital lease obligations.

As of September 28, 2013, we were unable to reliably estimate when cash settlements with taxing authorities may occur with respect to our unrecognized tax benefits of $90.3 million. Additionally, we have provided guarantees to various third parties in the form of letters of credit totaling $23.1 million as of September 28, 2013. The letters of credit cover various guarantees including workers' compensation claims and customs duties. Lastly, we have defined benefit pension plans with an underfunded amount of $22.3 million at September 28, 2013. We will be required to provide additional funding to these plans in the future if our returns on plan assets are not sufficient to meet our funding obligations. None of the amounts described in this paragraph are included in the table above. 

Off-Balance Sheet Arrangements

As of September 28, 2013, we did not have any off-balance sheet arrangements, as defined in Item 303(a)(4)(ii) of Regulation S-K promulgated by the SEC, that have or are reasonably likely to have a current or future effect on our financial condition, changes in our financial condition, revenues, or expenses, results of operations, liquidity, capital expenditures, or capital resources that is material to investors.

49

Table of Contents

Quarterly Results (Unaudited)
 
The following tables contain selected unaudited quarterly financial data for 2013 and 2012. In management's opinion, the unaudited data has been prepared on the same basis as the audited information and includes all adjustments (consisting only of normal recurring adjustments) necessary for a fair presentation of the data for the periods presented. Our results of operations have varied and may continue to fluctuate significantly from quarter to quarter. The results of operations in any period should not be considered indicative of the results to be expected from any future period.
 
 
Year ended September 28, 2013
 
 
First Quarter
 
Second Quarter
 
Third Quarter
 
Fourth Quarter
 
 
(In thousands, except per share data)
 
Net sales
$
1,494,945

 
$
1,427,642

 
$
1,489,214

 
$
1,505,323

 
Gross profit
$
96,928

 
$
100,304

 
$
114,251

 
$
115,334

 
Gross margin
6.5
%
 
7.0
%
 
7.7
%
 
7.7
%
 
Operating income
$
31,462

 
$
45,798

 
$
35,681

 
$
44,688

 
Operating margin
2.1
%
 
3.2
%
 
2.4
%
 
3.0
%
 
Net income
$
621

 
$
21,191

 
$
18,738

 
$
38,801

(1)
Basic net income per share
$
0.01

 
$
0.26

 
0.23

 
$
0.46

 
Diluted net income per share
$
0.01

 
$
0.25

 
0.22

 
$
0.44

 
 
 
 
 
 
 
 
 
 


 
Year ended September 29, 2012
 
 
First Quarter
 
Second Quarter
 
Third Quarter
 
Fourth Quarter
 
 
(In thousands, except per share data)
 
Net sales
$
1,502,366

 
$
1,463,082

 
$
1,549,302

 
$
1,578,584

 
Gross profit
$
109,025

 
$
106,348

 
$
105,252

 
$
115,157

 
Gross margin
7.3
%
 
7.3
%
 
6.8
%
 
7.3
%
 
Operating income
$
39,688

 
$
30,208

 
$
35,394

 
$
32,200

 
Operating margin
2.6
%
 
2.1
%
 
2.3
%
 
2.0
%
 
Net income (loss)
$
8,575

 
$
(1,439
)
 
$
8,948

 
$
164,150

(1)
Basic net income (loss) per share
$
0.11

 
$
(0.02
)
 
$
0.11

 
$
2.01

 
Diluted net income (loss) per share
$
0.10

 
$
(0.02
)
 
$
0.11

 
$
1.96

 


(1) During the fourth quarters of 2013 and 2012, we concluded that it was more likely than not that we would be able to realize the benefit of a portion of our deferred tax assets in the future. As a result, we released $21.5 million and $158.7 million in 2013 and 2012, respectively, of the valuation allowance attributable to certain U.S. and foreign deferred tax assets and net operating losses.

50

Table of Contents

Item 7A.   Quantitative and Qualitative Disclosures about Market Risk
 
Interest Rate Risk
 
Our primary exposure to market risk for changes in interest rates relates to certain of our outstanding debt obligations. As of September 28, 2013, we had $540.0 million of long-term debt, of which $40 million bears interest at a floating rate and $500 million of fixed rate debt, which has been converted to variable rate debt through the use of an interest rate swap.

The effect of an immediate 10% change in interest rates would not have a significant impact on our results of operations.

Foreign Currency Exchange Risk
 
We transact business in foreign currencies. Our foreign exchange policy requires that we take certain steps to limit our foreign exchange exposures resulting from certain assets and liabilities and forecasted cash flows. However, our policy does not require us to hedge all foreign exchange exposures. Furthermore, our foreign currency hedges are based on forecasted transactions and estimated balances, the amount of which may differ from that actually incurred. As a result, we can experience foreign exchange gains and losses in our results of operations.
 
Our primary foreign currency cash flows are in certain Asian and European countries, Israel, Brazil and Mexico. We enter into short-term foreign currency forward contracts to hedge currency exposures associated with certain monetary assets and liabilities denominated in non-functional currencies. These contracts typically have maturities of up to two months and are not designated as part of a hedging relationship in accordance with ASC Topic 815. All outstanding foreign currency forward contracts are marked-to-market at the end of the period with unrealized gains and losses included in other income (expense), net, in the consolidated statements of income. As of September 28, 2013, we had outstanding foreign currency forward contracts in the aggregate notional amount of $190.2 million.

We also utilize foreign currency forward contracts to hedge certain operational (“cash flow”) exposures resulting from changes in foreign currency exchange rates. Such exposures result from 1) forecasted sales denominated in currencies other than those used to pay for materials and labor and 2) anticipated capital expenditures denominated in a currency other than the functional currency of the entity making the expenditures. These contracts may be up to twelve months in duration and are accounted for as cash flow hedges under ASC Topic 815. The effective portion of changes in the fair value of the contracts is recorded in stockholders' equity as a separate component of accumulated other comprehensive income and recognized in earnings when the hedged item affects earnings. We had forward contracts related to cash flow hedges in various foreign currencies in the aggregate notional amount of $100.7 million as of September 28, 2013.

The net impact of an immediate 10% change in exchange rates would not be material to our consolidated financial statements, provided we accurately forecast and estimate our foreign currency exposure. If such forecasts are materially inaccurate, we could incur significant gains or losses.

Item 8.   Financial Statements and Supplementary Data
 
The information required by this item is included below and incorporated by reference from the financial statement schedule included in “Part IV-Item 15(a)(2)” and the selected quarterly financial data referred to in “Part II-Item 7-Management's Discussion and Analysis of Financial Condition and Results of Operations-Quarterly Results (Unaudited).”


51

Table of Contents

Report of Independent Registered Public Accounting Firm

 
The Board of Directors and Stockholders
 
Sanmina Corporation:
    
We have audited the accompanying consolidated balance sheets of Sanmina Corporation and subsidiaries (the Company) as of September 28, 2013 and September 29, 2012, and the related consolidated statements of income, comprehensive income, stockholders' equity, and cash flows for each of the years in the three-year period ended September 28, 2013. In connection with our audits of the consolidated financial statements, we have also audited the consolidated financial statement schedule of valuation and qualifying accounts as set forth under Item 15. We have also audited the Company's internal control over financial reporting as of September 28, 2013, based on criteria established in Internal Control - Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission. The Company's management is responsible for these consolidated financial statements and financial statement schedule, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management's Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule and an opinion on the Company's internal control over financial reporting based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the consolidated financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.
A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of the Company as of September 28, 2013 and September 29, 2012, and the results of its operations and its cash flows for each of the years in the three-year period ended September 28, 2013, in conformity with U.S. generally accepted accounting principles. Also in our opinion, the related financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of September 28, 2013, based on criteria established in Internal Control - Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission.

 
/s/ KPMG LLP
 
Santa Clara, California
November 27, 2013

52

Table of Contents

SANMINA CORPORATION
 
CONSOLIDATED BALANCE SHEETS
 
 
As of
 
September 28,
2013
 
September 29,
2012
 
(In thousands, except par value)
ASSETS
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$
402,875

 
$
409,618

Accounts receivable, net of allowances of $11,735 and $12,032, respectively
944,816

 
1,001,543

Inventories
781,560

 
826,539

Prepaid expenses and other current assets
75,337

 
88,599

Total current assets
2,204,588

 
2,326,299

Property, plant and equipment, net
540,151

 
569,365

Other
251,109

 
272,122

Total assets
$
2,995,848

 
$
3,167,786

LIABILITIES AND STOCKHOLDERS' EQUITY
 

 
 

Current liabilities:
 

 
 

Accounts payable
$
956,488

 
$
937,737

Accrued liabilities
109,363

 
104,741

Accrued payroll and related benefits
118,572

 
117,074

Short-term debt
22,301

 
59,995

Total current liabilities
1,206,724

 
1,219,547

Long-term liabilities:
 
 
 
Long-term debt
562,512

 
837,364

Other
135,048

 
147,094

Total long-term liabilities
697,560

 
984,458

Commitments and contingencies (Note 8)


 


Stockholders' equity:


 


Preferred stock, $.01 par value, authorized 5,000 shares, none issued and outstanding

 

Common stock, $.01 par value, authorized 166,667 shares, 97,658 and 94,971 shares issued, respectively, and 84,153 and 81,635 shares outstanding, respectively
842

 
817

Treasury stock, 13,505 and 13,336 shares, respectively, at cost
(215,658
)
 
(214,133
)
Additional paid-in capital
6,103,634

 
6,074,524

Accumulated other comprehensive income
84,301

 
63,479

Accumulated deficit
(4,881,555
)
 
(4,960,906
)
Total stockholders' equity
1,091,564

 
963,781

Total liabilities and stockholders' equity
$
2,995,848

 
$
3,167,786

 
See accompanying notes to the consolidated financial statements.


53

Table of Contents

SANMINA CORPORATION
 
CONSOLIDATED STATEMENTS OF INCOME
 
 
Year Ended
 
September 28,
2013
 
September 29,
2012
 
October 1,
2011
 
(In thousands, except per share amounts)
 
 
Net sales
$
5,917,124

 
$
6,093,334

 
$
6,602,411

Cost of sales
5,490,307

 
5,657,552

 
6,092,060

Gross profit
426,817

 
435,782

 
510,351

Operating expenses:
 
 
 
 
 
Selling, general and administrative
238,072

 
240,863

 
247,127

Research and development
25,571

 
21,899

 
20,802

Restructuring and integration costs
24,910

 
31,371

 
29,609

Amortization of intangible assets
1,896

 
3,067

 
3,831

Asset impairments
2,100

 
2,390

 
450

Gain on sales of long-lived assets
(23,361
)
 
(1,298
)
 
(3,465
)
Total operating expenses
269,188

 
298,292

 
298,354

 
 
 
 
 
 
Operating income
157,629

 
137,490

 
211,997

 
 
 
 
 
 
Interest income
1,014

 
1,425

 
1,861

Interest expense
(41,004
)
 
(71,744
)
 
(99,114
)
Other income (expense), net
(12,832
)
 
(291
)
 
892

Loss on extinguishments of debt
(1,401
)
 
(16,937
)
 
(16,098
)
Interest and other income (expense), net
(54,223
)
 
(87,547
)
 
(112,459
)
Income before income taxes
103,406

 
49,943

 
99,538

Provision for (benefit from) income taxes
24,055

 
(130,291
)
 
30,621

Net income
$
79,351

 
$
180,234

 
$
68,917

 
 
 
 
 
 
Net income per share:
 
 
 
 
 
Basic
$
0.96

 
$
2.22

 
$
0.86

Diluted
$
0.93

 
$
2.16

 
$
0.83

 
 
 
 
 
 
Weighted-average shares used in computing per share amounts:
 
 
 
 
 
Basic
82,834

 
81,284

 
80,345

Diluted
85,403

 
83,495

 
83,158

 
See accompanying notes to the consolidated financial statements.


54

Table of Contents

SANMINA CORPORATION
 
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
 
 
Year Ended
 
September 28,
2013
 
September 29,
2012
 
October 1,
2011
 
(In thousands)
 
 
Net income
$
79,351

 
$
180,234

 
$
68,917

Other comprehensive income:
 
 
 
 
 
Changes in unrealized loss on derivative financial instruments, net of tax
21,185

 
6,474

 
6,978

Foreign currency translation adjustments
(3,072
)
 
(2,543
)
 
5,419

Changes in unrecognized net actuarial loss and unrecognized transition costs, net of tax
2,709

 
(11,190
)
 
4,124

Comprehensive income
$
100,173

 
$
172,975

 
$
85,438

 
See accompanying notes to the consolidated financial statements.
 

55

Table of Contents

SANMINA CORPORATION
 
CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY
 
 
Common Stock and Additional Paid-in Capital
 
Treasury Stock
 
 
 
 
 
 
 
Number of
Shares
 
Amount
 
Number of
Shares
 
Amount
 
Accumulated
Other
Comprehensive
Income
 
Accumulated
Deficit
 
Total
 
(In thousands)
BALANCE AT OCTOBER 2, 2010
93,074

 
$
6,031,971

 
(13,352
)
 
$
(214,530
)
 
$
54,217

 
$
(5,210,057
)
 
$
661,601

Issuances under stock plans
961

 
4,603

 

 

 

 

 
4,603

Cumulative translation adjustment

 

 

 

 
5,419

 

 
5,419

Changes in unrealized loss on derivative financial instruments, net of tax

 

 

 

 
6,978

 

 
6,978

Changes in unrecognized net actuarial loss and unrecognized transition costs, net of tax

 

 

 

 
4,124

 

 
4,124

Stock-based compensation

 
18,896

 

 

 

 

 
18,896

Issuances (repurchases) of treasury stock

 
(723
)
 
51

 
702

 

 

 
(21
)
Net income

 

 

 

 

 
68,917

 
68,917

BALANCE AT OCTOBER 1, 2011
94,035

 
$
6,054,747

 
(13,301
)
 
$
(213,828
)
 
$
70,738

 
$
(5,141,140
)
 
$
770,517

Issuances under stock plans
936

 
2,595

 

 

 

 

 
2,595

Cumulative translation adjustment

 

 

 

 
(2,543
)
 

 
(2,543
)
Changes in unrealized loss on derivative financial instruments, net of tax

 

 

 

 
6,474

 

 
6,474

Changes in unrecognized net actuarial loss and unrecognized transition costs, net of tax

 

 

 

 
(11,190
)
 

 
(11,190
)
Stock-based compensation

 
17,999

 

 

 

 

 
17,999

Issuances (repurchases) of treasury stock

 

 
(35
)
 
(305
)
 

 

 
(305
)
Net income