TDG Gold Corp. Intersects 21.6 metres of 3.66 g/t gold Equivalent from Near Surface in the Creek to JM Zones, Shasta Project, Toodoggone District, BC

WHITE ROCK, BC / ACCESSWIRE / April 19, 2022 / TDG Gold Corp - (TSXV:TDG) (the "Company" or "TDG") is pleased to report a 21.6 metre ("m") drill intercept of 1.93 grams per tonne ("g/t") gold ("Au") and 138 g/t silver ("Ag") [3.66 g/t AuEq*] from 19.5 m depth in hole SH21-039 (Figure 1) located across the Creek to JM Zones, contained within a broader interval of 35.1 m of 1.29 g/t Au and 90 g/t Ag [2.41 g/t AuEq*] from 6.0 m depth.

DDH SH21-039 intersected: 35.1 m of 1.29 g/t Au and 90 g/t Ag [2.41 g/t AuEq* from 6.0 m depth;

Including, 21.6 m of 1.93 g/t Au and 138 g/t Ag [3.66 g/t AuEq*] from 19.5 m depth.

TDG Gold Corp., Monday, April 18, 2022, Press release picture

Figure 1. Schematic Cross-Section of Drillhole SH21-039.

*Gold equivalent (AuEq) is used for illustrative purposes, to express the combined value of Au and Ag as a percentage of Au. Calculations are uncut and no allowances have been made to accommodate potential recovery losses that would occur in a mining scenario. AuEq is calculated using 80:1 silver to gold ratio. Composite results were built using a 0.1 g/t AuEq cut-off, although there are intervals within the composites below 0.1 g/t AuEq.

Preliminary results from SH21-039 are presented in this news release along with preliminary results from four other drillholes drilled within the JM to Creek Zones at TDG's former producing Shasta project in the Toodoggone District, B.C. (Figure 2). A complete assay table of results for drillhole SH21-039 can also be viewed on the TDG Gold Corp. website (link).

Steven Kramar, TDG's Senior Geologist and B.C. Program Lead, commented: "With the geological modelling underway, we are starting to delineate the Shasta Fault and JM Zones into discrete higher-grade areas, and continue to demonstrate broad continuous halo-style mineralization between these two structures in addition to outside their periphery."

TDG Gold Corp., Monday, April 18, 2022, Press release picture

Figure 2. Plan View of Drillholes SH21-036, SH21-038, SH21-039, SH21-042 and SH21-047 in the JM to Creek Zones, Shasta Project, Toodoggone District, B.C.

Key intercepts for diamond drillholes SH21-036, SH21-038, SH21-039, SH21-042 and SH21-047 are presented in Table 1 and shown in cross-sections (Figures 2-4). Drill results for the remaining 2021 drillholes are pending analytical results.

Table 1. Results from the 2021 Drilling within the JM to Creek Zones.

Drillhole

From

To

Length

Au

Ag

AuEq*

(m)

(m)

(m)

(g/t)

(g/t)

(g/t)

SH21-036

38.0

73.7

35.7

0.49

26

0.81

incl

41.0

53.0

12.0

0.95

58

1.68

and

84.4

121.1

36.7

0.31

6

0.39

SH21-038

5.1

26.7

21.6

0.35

12

0.50

and

43.2

48.9

5.7

0.46

17

0.68

and

75.4

92.0

16.6

0.37

14

0.54

and

117.6

131.1

13.5

0.45

9

0.56

SH21-039

6.0

41.1

35.1

1.29

90

2.41

incl

6.0

19.5

13.5

0.26

13

0.42

incl

19.5

41.1

21.6

1.93

138

3.66

and

41.1

53.1

12.0

0.04

1

0.05

and

53.1

140.0

86.9

0.36

8

0.45

incl

53.1

65.0

11.9

0.79

20

1.04

incl

65.0

84.5

19.5

0.07

5

0.13

incl

84.5

107.0

22.5

0.72

11

0.87

incl

107.0

140.0

33.0

0.11

2

0.14

SH21-042

38.0

98.5

60.5

0.57

16

0.76

incl

61.0

79.0

18.0

1.01

37

1.47

SH21-047

61.0

127.0

66.0

0.46

18

0.69

*Gold equivalent (AuEq) is used for illustrative purposes, to express the combined value of Au and Ag as a percentage of Au. Calculations are uncut and no allowances have been made to accommodate potential recovery losses that would occur in a mining scenario. AuEq is calculated using 80:1 silver to gold ratio. Composite results were built using a 0.1 g/t AuEq cut-off, although there are intervals within the composites below 0.1 g/t AuEq.

** Intervals are core-length weighted. True width is estimated between 75 to 95 % of core length, and core recovery is estimated to be > 90 %.

***Calculated composites are truncated to significant 2 digits for Au/AuEq and the nearest whole number for Ag.

Photo 1 presents an example of near-surface vein-style mineralization. In this case, higher concentrations of precious metals correlate to intensity of alteration and/or hydrothermal brecciation (from 25.4 m to 26.7 m; 1.70 g/t Au and 96 g/t Ag; 2.90 g/t AuEq*).

TDG Gold Corp., Monday, April 18, 2022, Press release picture

Photo 1. Mineralization encountered in drillhole SH21-039 from 24.5 - 27.8 m; preliminary assay results for 25.4 m to 26.7 m: 1.70 g/t Au and 96 g/t Ag [2.90 g/t AuEq*].

Drillhole SH21-039 was designed to target the Shasta Fault to test near-surface mineralization stepping closer to the Shasta Fault and following up on drillhole SH21-025 (see TDG News Release March 09, 2022). SH21-039 intersected near-surface mineralization (starting at 6.0 m) and appreciable grade in proximity to the Shasta Fault (21.6 m of 3.66 g/t AuEq*; 1.93 g/t Au, 138 g/t Ag) to a depth of 41.1 m, illustrating high-grade volcaniclastic rocks at near-surface depths, proximal to the small-scale historical workings (Figures 1 & 3).

SH21-036, 042 and 047 had the objective of targeting material underneath the historical mine workings (Figures 4 & 5). This concept was described in TDG's April 12, 2022, March 29, 2022 and January 04, 2022 news releases. Photo 2 presents an example of the mineralization (intense composite, cross-cutting quartz-carbonate veining +/- hydrothermal brecciation containing pyrite and acanthite sulphides) and alteration (intense potassic with pervasive silicification overprint, +/- chloritic alteration in the quartz-carbonate vein matrix) in the volcaniclastic rocks encountered below, and in proximity to the historical mine workings of the material still in-situ.

Drillhole SH21-038 was a preliminary test of the central area, and infill ⁠- between the Shasta Fault and the JM Structure ⁠- in an area with little to no drill data. SH21-038 collared into mineralized volcaniclastic rocks (26.7 m of 0.50 g/t AuEq*; 0.35 g/t Au, 12 g/t Ag) from 5.1 m depth, interpreted to be just west of the JM higher-grade central core (Figure 4). The drillhole ended in increasing precious metal concentrations (13.5 m of 0.56 g/t AuEq*; 0.45 g/t Au, 9 g/t Ag) at 117.6-131.06 m depth; with the end of hole ("EOH") interpreted to be indicative of the persistence and continuity of the ‘halo' of lower-grade mineralization adjacent to the Shasta Fault, on the footwall side. This is important as it demonstrates an opportunity to continue to drill this hole (or holes similar in concept) in 2022 to find the terminating depth of the ‘halo,' and expand the mineralized footprint at depth.

TDG Gold Corp., Monday, April 18, 2022, Press release picture

Photo 2. Mineralization encountered in drillhole SH21-042 from 64.0 - 70.3 m; preliminary assay results for 65.5 m to 67.0 m: 1.42 g/t Au and 67 g/t Ag [2.25 g/t AuEq*].

All 2021 drillholes are HQ sized drill core, while historical core are NQ/BQ core size. Particulars for 2021 drillholes (location, depth, etc.) are presented in Table 2. Assay results were received from SGS Labs Canada ("SGS"). Internal QA/QC review by TDG, working with Moose Mountain Technical Services ("MMTS"), is ongoing and therefore results are still considered preliminary.

Table 2. 2021 Drillhole Particulars.

HOLE

UTME (NAD83)

UTMN (NAD83)

Azimuth(°)

Dip(°)

Final Depth (m)

SH21-036

621,041

6,347,474

240

-80

153

SH21-038

621,052

6,347,406

240

-53

131

SH21-039

620,935

6,347,495

90

-65

140

SH21-042

621,084

6,347,464

240

-55

146

SH21-047

621,116

6,347,416

240

-50

153

QA/QC
Samples for the Shasta 2021 drill program followed chain of custody between collection, processing and delivery to an SGS laboratory in Burnaby, B.C. The drill core was delivered to the core shack at TDG's Baker Mine site, and processed by geologists who inserted certified reference materials, blanks and duplicates (pulp and coarse) into the sampling sequence. The 2021 drill core was cut in half (1/2 HQ core) and placed in zip-tied polyurethane bags, then in security-sealed rice bags before being delivered directly from the Baker Mine site, to Bandstra Transportation Systems in Prince George, B.C., and ultimately to the SGS laboratory in Burnaby, B.C. Samples were prepared and analyzed following procedures summarized in Table 3, where information about methodology can be found on the SGS Canada Website, in the analytical guide (here).

Table 3. Au and Ag Analytical Methods.

Drillhole

Prep

Method Au

Method Ag

Method Au-Overlimit

Method Ag-Overlimit

SH21-036

PRP89

GO_FAI50V10

GE_IMS40Q12

N/A

N/A

SH21-038

PRP89

GO_FAI50V10

GE_IMS40Q12

N/A

N/A

SH21-039

PRP89

GO_FAI50V10

GE_IMS40Q12

N/A

GO_FAG37V

SH21-042

PRP89

GO_FAI50V10

GE_IMS40Q12

N/A

N/A

SH21-047

PRP89

GO_FAI50V10

GE_IMS40Q12

N/A

GO_FAG37V

Quality assurance and control ("QAQC") is maintained internally at the lab through rigorous use of internal certified reference materials, blanks, and duplicates. An additional QAQC program was administered by TDG Gold through the use of certified reference materials ("CRMs"), duplicate samples and blank samples that were blindly inserted into the sample batch. If a QAQC sample returns an unacceptable value an investigation into the results is triggered and when deemed necessary, the samples that were tested in the batch with the failed QAQC sample are re-tested. For the purposes of this press release, results are ‘preliminary' and thus have not undergone TDG's comprehensive QAQC investigations.

TDG Gold Corp., Monday, April 18, 2022, Press release picture

Figure 3. Cross-Section of Drillhole SH21-039.

TDG Gold Corp., Monday, April 18, 2022, Press release picture

Figure 4. Cross-Section of Drillholes SH21-038 and SH21-047.

TDG Gold Corp., Monday, April 18, 2022, Press release picture

Figure 5. Cross-Section of Drillholes SH21-036 and SH21-042.

Qualified Person

The technical content of this news release has been reviewed and approved by Steven Kramar, MSc., P.Geo., a qualified person as defined by National Instrument 43-101.

This news release includes historical drilling information that has been reviewed by the Company's geological team. The Company's review of the historical records and information reasonably substantiate the validity of the information presented in this news release; however, the Company cannot directly verify the accuracy of the historical data, including the procedures used for sample collection and analysis. Therefore, the Company encourages investors to exercise appropriate caution when evaluating these results. Further data review is underway, in order to verify the validity of the data for the anticipated NI 43-101 compliant mineral resource estimate.

About TDG Gold Corp.

TDG is a major mineral claim holder in the historical Toodoggone Production Corridor of north-central British Columbia, Canada, with over 23,000 hectares of brownfield and greenfield exploration opportunities under direct ownership or earn-in agreement. TDG's flagship projects are the former producing, high grade gold-silver Shasta, Baker and Mets mines, which are all road accessible, produced intermittently between 1981-2012, and have over 65,000 m of historical drilling. In 2021, TDG advanced the projects through compilation of historical data, new geological mapping, geochemical and geophysical surveys, and, for Shasta, drill testing of the known mineralization occurrences and their extensions. TDG currently has 96,343,142 common shares issued and outstanding.

ON BEHALF OF THE BOARD

Fletcher Morgan
Chief Executive Officer

For further information contact:
TDG Gold Corp.,
Telephone: +1.604.536.2711
Email: info@tdggold.com

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

This news release contains forward-looking statements that are based on the Company's current expectations and estimates. Forward-looking statements are frequently characterized by words such as "plan", "expect", "project", "intend", "believe", "anticipate", "estimate", "suggest", "indicate" and other similar words or statements that certain events or conditions "may" or "will" occur. Such forward-looking statements involve known and unknown risks, uncertainties and other factors that could cause actual events or results to differ materially from estimated or anticipated events or results implied or expressed in such forward-looking statements. Such factors include, among others: the actual results of current exploration activities; conclusions of economic evaluations; changes in project parameters as plans to continue to be refined; possible variations in ore grade or recovery rates; accidents, labour disputes and other risks of the mining industry; delays in obtaining governmental approvals or financing; and fluctuations in metal prices. There may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. Any forward-looking statement speaks only as of the date on which it is made and, except as may be required by applicable securities laws, the Company disclaims any intent or obligation to update any forward-looking statement, whether as a result of new information, future events or results or otherwise. Forward-looking statements are not guarantees of future performance and accordingly undue reliance should not be put on such statements due to the inherent uncertainty therein.

SOURCE: TDG Gold Corp.



View source version on accesswire.com:
https://www.accesswire.com/697883/TDG-Gold-Corp-Intersects-216-metres-of-366-gt-gold-Equivalent-from-Near-Surface-in-the-Creek-to-JM-Zones-Shasta-Project-Toodoggone-District-BC

Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.